|
VINTAGE CAST IRON HEAT REGISTER COLD AIR RETURN GRATE 30" X 20"
VINTAGE CAST IRON HEAT COLD AIR RETURN REGISTER GRATE Dimensions: 30" x 20" x 1/8" No cracks or repairs. This was probably a cold air return in the wall or ceiling. No louvers were ever attached. Due to the thickness. It would not be recommended for the floor in a traffic area. Ship to the lower 48 states and accept paypal for payment. Thank you for looking and please check out my other items for sale!
|
|
|
Vintage Heat Grate Grill Cold Air Return Vent Register 14x12 #217-11
Nice Grate. Needs Slight Cleanup, Break on backside edge, not noticeable at all when installed. Rust Petina. Measures- 14x12 Outside Diameter with 12x10 floor hole size. View ALL Our Heat Grates By Clicking This Link Or Pasting It Into Your Browser: OR: Search our store using the AUCTIVA search link above template design by erns-eporium ADDITIONAL SHIPPING CHARGES APPLY FOR ALASKA and HAWAII. PLEASE CONTACT US ABOUT RATE BEFORE PURCHASE. OR WE WILL INVOICE WITH ADDITIONAL FEES VIA PAYPAL. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fv%7F.rpn36%3E-13d1665fcd0-0xff-
|
|
|
Vintage Wood Floor Grate Cold Air Return Grille Furnace Heat Register 26 x 16
Two(2) Vintage Oak Wood Floor Grates Cold Air Return GrillesFurnace Heat Registers. Both In Good Original Condition as shown with the normal expected wear from 100 years of dirt and dust. Dimensions of each are 26 1/4" x 16 1/4" x1 1/4"
|
|
|
Vintage Rectangular Cast Iron register vent grate ca. 14" x 16.75"-Cold air ret.
Fairly ornate Vintage Rectangular Cast Iron register vent grate ca. 14" x 16.75"Cold air return Dirty. Dusty, a bit of chipping paint, but I don't see any cracks in the steel or breaks in the detail. No backing louvers are attached to this one. just the top grate, as pictured. Weighs about 8.25 lbs by itself. Well used but appears well taken care of and not abused Please review all pics and feel free to ask questions. Thanks.
|
|
|
Vintage Cold Air Return Cast Iron Arts & Crafts #1680-13
GRATE HAS A CHIP MISSING OUT OF CORNER- SEE PICS Rusty but very usable Measures: 26.5" x 18.25" with 24.25" x 16" floor hole size View ALL Our Heat Grates By Clicking This Link Or Pasting It Into Your Browser: http:stores.ebay.com/ny-salvage/i.html?nkw=Heat+Grates&submit=Search&LH_TitleDesc=1&sid=111308834 template design by erns-eporium
|
|
|
Vintage cast iron heat grate cold air decoretive
Vintage cast iron heat grate cold air decoretive Search Ok this is a very old heating grate. It had a crack in it so I welded it with knickle rod, it has primer on it so you can paint any color you want. Do not use EBAYS checkout.Wait till I can invoice you please! 507-433-3750.I use the shipping calculator for shipping, I do not use USPS, ever filed a claim with the goverment? So please don't whine about the cost after the fact. I f you think I have made some gross mistake let me know before auction end, some items, there is a larger handling fee because it take longer to box, put the two prices together and if it more than you want to spend just pass, instead of coping a attidude on just the shipping. I offer pay pal as an option on items ending price being below $100 including shipping and handling to confirmed address only. when the ... moreitem gets up into the hundreds PP or credit card in really no longer an option they charge me about 4% to acept your $. Contact me with your credit card and I will process your purchase. Auctions will be paid within 10 days of sale. Or there will be a non paying bidder alert filed, and at that time the item will be relisted.Please include your phone number for shipping it is a requirement. Or Art Nelson 1505 10 Th Dr Se Austin MN 55912.507-433-3750 Shipping calculator may be off on shipping estimate!U.S shipping.Small items go out by ups calculator. If you are from Alaska or Hawaii please state this, if asking for shipping quote. We don't ship to P.O boxes unless it will fit in a standard size mailbox, And if I have to go to the post office to ship something to a P.O. box, there will be a Twenty dollar charge for that. Insurance, if you want insuranse for more than $100 please ask. We will send out truck shipments to business address with forklift.that means heavy items over 150# Please include your PHONE NUMBER for shipping.Shipping is variable due to size of package and weight.i DO NOT GIVE OUT TRACKING N.O.s AT THIS TIME,It takes up too muc
|
|
|
Vintage Cold air return Vents/Grates/Heating & Cooling Registers
Vintage Cold Air Return Vents/Grates& ONE Register. The Register measures 10x14& the Cold Air Return's Measure. 16x32 14x26 8x14 These came out of a Century Home that had updated to a Conventional furnace in the 40's or 50's? They are in great condition and they are being sold at ONE Price for all 4 pieces. Low Starting Bid with No Reserve No Returns
|
|
|
Vintage Cold Air Return 18x26 Arts & Crafts #1879-13
Has one inch square pattern. Some surface rust. No cracks or pieces missing. Measures: 18 3/8th" x 26 3/8th" with a 16" x 24.25" floor hole size View ALL Our Heat Grates By Clicking This Link Or Pasting It Into Your Browser: http:stores.ebay.com/ny-salvage/Grates-i.html?fsub=9&sid=111308834&trksid=p4634.c0.m322 template design by erns-eporium
|
|
|
Vintage Wood Floor Grate Cold Air Return Grille Furnace Heat Register 14 x 14
Needs restoration. 6 broken slats. Minneapolis/Hastings MN area. From 1931 home.
|
|
|
TWO VINTAGE COLD AIR REGISTERS IN GREAT CONDITION AND ARE A MATCHED SET.
THIS ITEM FOR AUCTION IS A VINTAGE CAST IRON COLD AIR REGISTER THAT IS IN GREAT CONDITION NO CRACKS OR MISSING PIECES. MEASURES 14" WIDE BY 12" HIGH OUTSIDE MEASUREMENTS INSIDE IS 10" X!2" THERE ARE TWO OF THEM MATCHING. THEY ARE ABOUT 1/4 OF AN INCH THICK FEEL FREE TO ASK QUESTIONS.
|
|
|
vintage cast iron cold air return heating grates vents 31'' X11''
ANTIQUE/ VINTAGE CAST IRON COLD AIR RETURN VENTS OR GRATES. OUTSIDE MEASURMENTS 31' X 11 INSIDE OR FLOOR 29 3/4'X 9 3/4' AS SEEN IN THE PICTURES THESE HAVE A NON SLIP RIDGES. SO I'M THINKING THESE CAME FROM A STORE OR COMMERCIAL BUILDING. ALSO HAVE 2 OF THESE. DIFFERENT SIZES. BOTH ARE LISTED USE GOOD BOXES. BUBBLE WRAP, PEANUTS PACK WITH CARE. AFTER 5 DAYS OF NON-PAYMENT OR NO COMMUNICATION. ITEMS WILL BE RELISTED. Five star rating is important to a seller. Pls. be conscientious when filling this out. i ship same day. Except holidays/Sundays. pls be aware, no matter how fast i ship,the post office makes the delivery at their time. we are committed to both quality and customer satisfaction. we make every effort to photograph accurately, give you the details. If you have any questions, pls email before biding. we will make ... moreevery attempt to answer in a timely manor
|
|
|
VINTAGE ORNATE FLOOR HEAT REGISTER COLD AIR RETURN (3)
VINTAGE ORNATE FLOOR OR WALL HEAT REGISTER COLD AIR RETURN Outside Measurements 13-1/4 x 9-1/2 Inside Measurements 12-1/4 x 8-1/4 Includes working damper sold as is
|
|
|
your choice vintage floor register grate vent cold air return (2 available)
These 2 vintage vents were rescued out of our uncle's house in Steubenville. Ohio that had to be demolished. I have the original mortgage deed showing grandparents bought the house from another relative in 1927. We also rescued a few other architectural items that are listed separately. You may purchase both and I will combine shipping but the list price is just for one vent. Each vent is 31" x 15" on the top and the back measures about 25 3/4" from slat to slat. Thank you for looking.
|
|
|
Vintage Wood Floor Grate Cold Air Return Grille Furnace Heat Register 9 x 7
Vintage Wood Floor Grate Cold Air Return Grille Furnace Heat Register 9 x 7 No. 145 Model 5-F-5 Wolf Mfg Industries. Quincy IL. Measures approximately 9" x 7" CONSIGNMENT- Let us sell your items for you. Midwest Resellers will do all the work for you to sell your items fast. We will take professional photos of your unwanted items. Create a description and a title that will attract buyers. Turn those items into cash! For more information see the contact section below. If you have any questions please contact us through the eBay messaging system. We will be happy to reply to you within 24 hours. Please provide payment within 48 hours of auction end. Once payment has been made we will provide positive feedback and will package and send your item within 48 hours. We take our feedback very seriously. So please contact us before leaving ... morenegative feedback, and we will work with you to answer any questions or concerns. Payment Method Accepted: Paypal. The shipment of this product will be packaged and shipped within 48 hours after payment has been received. Price includes packaging and shipping to anywhere in the United States. For shipping outside of the U.S.A. please contact us for updated shipping costs.
|
|
|
VINTAGE ORNATE FLOOR HEAT REGISTER COLD AIR RETURN (14)
VINTAGE ORNATE FLOOR HEAT REGISTER COLD AIR RETURN Outside Measurements: 12-3/16 x 16-1/8 Inside Measurements: 10-1/4 x 14 No dampers
|
|
|
Vintage Arts & Crafts Floor Register Heat Vent Cold Air Return Grill 2350-13
Vintage Arts&Crafts floor grate. Vent, heat register cold air return grill. Stamped steel grate in an unusual size. Old white paint. Piece has a 3/4" squares design. 4 Working louvres and 3 drilled holes for mounting. Overall size is approx. 24" x 11" Floor hole size is approx. 22" x 9" Overall in very good condition with some light rusting as shown. template design by erns-eporium
|
|
|
6" x 32" Vintage Floor Wall Register Heat Vent Cold Air Return Grill 2349-13
Vintage floor grate. Vent, heat register cold air return grill. Heavy stamped steel grate in an unusual size. Old brown paint. Piece is a 50's-60's type register. Overall size is approx. 31 7/8" x 5 3/4" Floor hole size is approx. 29 3/8" x 3 5/8" Overall in very good condition with some light rusting as shown. template design by erns-eporium
|
|
|
ANTIQUE VINTAGE COLD AIR RETURN REGISTER HEATING VENT WOODEN 16" x 30" SLATTED
Up for auction is an estate wooden slat vent. 16" x 30" x 1 1/4" wide. Each slat is form-fitted into the exterior frame slats(see photo) The upper two slats in the first photo are loose; otherwise, this item is nicely preserved! Please use the provided Zoom feature to take a close look at this item before bidding. I'll ship this package via USPS Standard Parcel with tracking. Please feel free to email me here at Ebay if you have any questions. I'm offering two other vents at this time. And will gladly combine shipping upon request. Thanks for looking. And good luck! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-141f807cb30-0xfa-
|
|
|
Vintage Antique Wood Floor Grate Cold Air Return 24 1/2 x 15 1/2 in
Vintage wooden register grate. this is an old one. 24 1/2 x 15 1/2 in pictures tell the story. thanks Sueanne
|
|
|
Vintage Cold Air Return, Floor Grate, 13 3/4" x 11 3/4" (12" x 10" Hole) Antique
Vintage Cold Air Return. Floor Grate, 13 3/4" x 11 3/4" Fits 12" x 10" Hole. Not sure of the age. If I had to guess, I would estimate from the 40's to the 60's. The house was built in 1920. I moved the cold air returns to the walls.
|
|
|
Antique Ornate Round Cast Iron Register Grate Vent Heat / Cold Air Vintage
Cast Iron Register Grate that is rusty. The diameter is 15 1/2" Neat old antique piece.
|
|
|
Vintage wooden floor grate/cold air return
Up for auction is a very old wooden floor grate/ cold air return. This was taken out of an old house in the Minneapolis/St. Paul area. It is made of oak and has the following dimensions: 7 5/8" x 14 1/8" x 1 1/4" Grate shows decades of use but is sound. I also have three other similar grates of varying dimensions on other auctions. Shipping is buyers responsibility. Shipping cost is estimated between $5 and $10 depending upon location. Successful buyer should contact seller to determine shipping costs and total charges prior to making payment!
|
|
|
Vintage Wall Ceiling Grill Vent Decorative Cold Air Return 25" X 31" #2523-13
Large vent would be good for wall or ceiling. The old green paint is in good condition only small amounts of rust showing. Has a metal frame with decorative cast iron corners. The center is a woven steel lattice mesh. We have a match to this vent you can view it by searching our store for item#2524-13. It measures aprox. 25 3/4"wide X 31 3/4"tall, Would fit a rough opening of 24 1/2"wide X 30 1/2"tall template design by erns-eporium
|
|
|
Vintage Heating Grate / Cold Air Return - 10" x 16" - Floor -Several Available
Vintage Heating Grate/ Cold Air Return Measures 10 inches x 16 inches This item will be shipped in a flat box at regular calculated parcel rate shipping according to your location. I have several other sizes listed so please check out my! If you order more and want me to ship them all together. I can ship in a different box and combine shipping, just wait for me to send you an invoice. Some surface rust. Patina and old paint. The best thing to do first is to hit them with some high pressure air from an air compressor, etc. to blow all the lint and stuff out. I then brush them down with a broom. Of course the ideal thing to do is sandblast them. Very little rust. Good patina, paint it to match your home or leave as is Will be shipped in large flat box that weighs between 3 and 4 pounds Obviously this is used. I do a lot of architectural salvage ... moreand I have a lot of these old grates/ vents I will be listing in various sizes. These are just a few of the old things I have taken out of turn of the century homes over the years. Please see the photos for description and measurements. Please check out my! What you see in the pictures is what you get so if you have a question about something. Ask me, don't leave negative feedback afterwards. These items are dusty and were in storage so they will need cleaned up. Please check all photos to be sure. I will be listing A TON of this kind of stuff so keep your eyes peeled and check out my! Overall this is a great lot. Check the pictures and see for yourself. Good Luck bidding! I Please see the photos for overall condition. Let me know if you need to see any more. Please keep in mind. In general, my items are old vintage items from barns, basements and attics where they have been for many, many years. They may be a bit dusty or dirty, smell a bit, and may have the occasional cobweb on them. I don’t send out anything in a horrible state, but I generally don’t have things dry-cleaned before I sell them either. Again, I try to show everything in my photos, but let me know
|
|
|
(2) Vintage Heating Grates/ Cold Air Returns - 8 x 14 -Wall/Floor -Several Avail
2) Vintage Heating Grates/ Cold Air Returns* wall or floor mount* Each measures 8 inches x 14 inches I have 2 of these in this size. Selling in this lot of 2- Each lot of 2 will be shipped in a flat box at regurlar calculated parcel rate according to your location. I have several other sizes listed. If you order more and want me to ship them all together. I can ship in a different box and combine shipping, just wait for me to send you an invoice. These have some tape on them and old paint. The best thing to do first is to hit them with some high pressure air from an air compressor. Etc. to blow all the lint and stuff out. I then brush them down with a broom. Of course the ideal thing to do is sandblast them. Very little rust. Good patina, paint it to match your home or leave as is Will be shipped in large flat box that weighs between 5 and ... more6 pounds Obviously these are used. I do a lot of architectural salvage and I have a lot of these old grates/ vents I will be listing in various sizes. These are just a few of the old things I have taken out of turn of the century homes over the years. Please see the photos for description and measurements. Please check out my! What you see in the pictures is what you get so if you have a question about something. Ask me, don't leave negative feedback afterwards. These items are dusty and were in storage so they will need cleaned up. Please check all photos to be sure. I will be listing A TON of this kind of stuff so keep your eyes peeled and check out my! Overall this is a great lot. Check the pictures and see for yourself. Good Luck bidding! I Please see the photos for overall condition. Let me know if you need to see any more. Please keep in mind. In general, my items are old vintage items from barns, basements and attics where they have been for many, many years. They may be a bit dusty or dirty, smell a bit, and may have the occasional cobweb on them. I don’t send out anything in a horrible state, but I generally don’t have things dry-cleaned before I sell them
|
|
|
Vintage / Antique Cold Air Return / Furnace Vent Grate Rectangle Flat - 8 x 16
Vintage Antique Grate/ Cold Air Return Measures 8 inches x 16 inches. Sits in the floor about 3/4 inches This is just a flat metal grate. No damper, it just screws sits in your opening in the floor. This was taken out of a 100+ year old home in central Illinois. It is in good shape with a little surface patina and old paint. Paint it to your liking or leave as is. Please see all the pictures closely. Will be shipped in large flat box that weighs just over 3 1/2 pounds Obviously this is used. I do a lot of architectural salvage and I have a lot of these old grates/ vents I will be listing in various sizes. These are just a few of the old things I have taken out of turn of the century homes over the years. Please see the photos for description and measurements. Please check out my! What you see in the pictures is what you get so if you have ... morea question about something. Ask me, don't leave negative feedback afterwards. These items are dusty and were in storage so they will need cleaned up. Please check all photos to be sure. I will be listing A TON of this kind of stuff so keep your eyes peeled and check out my! Overall this is a great lot. Check the pictures and see for yourself. Good Luck bidding! I Please see the photos for overall condition. Let me know if you need to see any more. Please keep in mind. In general, my items are old vintage items from barns, basements and attics where they have been for many, many years. They may be a bit dusty or dirty, smell a bit, and may have the occasional cobweb on them. I don’t send out anything in a horrible state, but I generally don’t have things dry-cleaned before I sell them either. Again, I try to show everything in my photos, but let me know if you need to see more. I want you to be happy with what you get! I'm not happy unless you are happy with the item. PLEASE Check out my other items! CHECK MY FEEDBACK- BID WITH CONFIDENCE AND GOOD LUCK* PAYMENT AND SHIPPING INFORMATION: I only ship via United States Postal Service. Payment by Paypal only and must
|
|
|
Nice Vintage Heating Grate / Cold Air Return with Damper -12 x 16 -Opens Nicely!
Vintage Heating Grate/ Cold Air Return With Damper Measures 12 inches x 16 inches Damper slides great. I just put a little WD-40 on it! Very little rust. Good patina, paint it to match your home or leave as is Will be shipped in large flat box that weighs just over 9 pounds Obviously this is used. I do a lot of architectural salvage and I have a lot of these old grates/ vents I will be listing in various sizes. These are just a few of the old things I have taken out of turn of the century homes over the years. Please see the photos for description and measurements. Please check out my! What you see in the pictures is what you get so if you have a question about something. Ask me, don't leave negative feedback afterwards. These items are dusty and were in storage so they will need cleaned up. Please check all photos to be sure. I will ... morebe listing A TON of this kind of stuff so keep your eyes peeled and check out my! Overall this is a great lot. Check the pictures and see for yourself. Good Luck bidding! I Please see the photos for overall condition. Let me know if you need to see any more. Please keep in mind. In general, my items are old vintage items from barns, basements and attics where they have been for many, many years. They may be a bit dusty or dirty, smell a bit, and may have the occasional cobweb on them. I don’t send out anything in a horrible state, but I generally don’t have things dry-cleaned before I sell them either. Again, I try to show everything in my photos, but let me know if you need to see more. I want you to be happy with what you get! I'm not happy unless you are happy with the item. PLEASE Check out my other items! CHECK MY FEEDBACK- BID WITH CONFIDENCE AND GOOD LUCK* PAYMENT AND SHIPPING INFORMATION: I only ship via United States Postal Service. Payment by Paypal only and must be received within 3 days of auction's close or I reserve the right to relist the item. I only ship to confirmed Paypal addresses. I use a 5 day shipping/ handling time as I work full time and sh
|
|
|
Antique / Vintage Floor Register Grate or Cold Air Return with Louvered Damper
You are bidding on ~ Antique/ Vintage Floor Register Grate or Cold Air Return with Louvered Damper ~ For sale is an Antique/ Vintage Floor Register Grate or Cold Air Return with Louvered Damper with all parts and a fully functioning damper. I have left it in the original painted finish. Because I wanted to leave it up to the buyer as to what they wanted to do about that. It measures 14" wide x 11" high. The inset lip on the back measures 12"wide x 8" high. I also have an auction for another one identical to this. Except the knob on the damper is just a little different. I also have auctions for several other unique vintage floor register grates. See my here! Please feel free to contact me with any questions. Shipping price includes insurance. Save money by buying more than one of my auctions and receive a DEEP discount ... moreon combined shipping. Please wait for me to send you a combined invoice reflecting the discounted shipping before you pay. Shipping price listed applies to anywhere in the 48 contiguous states. Please contact me before bidding with any questions. Please check out all of my other items and save on shipping when multiple purchases are shipped together. Excludes"free shipping" auctions. I will always attempt to ship within one to two business days of receiving payment for an auction. PayPal is preferred. If you need to make payment by some other means. Contact me before bidding. Thanks for Looking!
|
|
|
Vintage Antique Wood Floor Grate Cold Air Return 29-7/8"x 11-7/8"x 1-1/4" Wooden
Wood grate. Please see photos for item condition, one slat has a piece missing, and many of the bottom slats are a little loose, will need reglueing. Overall it should be very sturdy with the proper repairs. I have another grate that is 23-1/4" x 11-7/8" x 1-1/4" Most likely from the same source(I found these at a Habitat for Humanity ReStore) please see my other listings, I will happily combine shipping.
|
|
|
Reclaimed Vintage Cold Air Return. Stamped Steel, Wood Grain.
This ebay listing is for a Reclaimed Vintage/Antique Stamped Steel Cold Air Return Vent/Grate. this Measures 28 1/4" Long By 16 1/4" Wide. This Fits a Opening of 25 3/4" X 13 3/4" As Found" condition. Faux Wood Grain pattern. Slight surface rust. Dust bunnies and such. No breaks or bends. Reclaimed for a Recent house Demolition. Thanks for looking.
|
|
|
Large Vintage Metal Floor Grate, 32 x 18, Fits Hole 30 x 16, Cold Air Return
Exact dimensions are 32 x 17 7/8 Grate is rusty/dirty. But in overall good condition. No breaks or major chips I can find. Is fairly straight, does not appear to have gotten bent or bowed. Please respond with any questions. Item is large and heavy so shipping is not cheap.
|
|
|
Vintage Wall Register Heat Vent Cold Air Return Grill 32" x 7.5" x 1" Metal
Vintage wall heat cold air return vent. Measurements: 32" long 7.5" tall 1" wide Vent will need to be repainted.
|
|
|
ANTIQUE VINTAGE CAST IRON FLOOR GRATE~COLD AIR RETURN~16x12~VENT~WALL~FARM TOOL
ANTIQUE VINTAGE CAST IRON FLOOR GRATE~COLD AIR RETURN~16x12~VENT~WALL~FARM TOOL I HAVE AVAILABLE AN ANTIQUE CAST IRON FLOOR GRATE.COLD AIR RETURN THIS GRATE MEASURES 16" X 12" ON THE TOP SIDE AND THE FITTER SIDE MEASURES 14" X 10" NO CRACKS. BREAKS, WELDS OR REPAIRS THE GRATE HAS BEEN REPAINTED BLACK PLEASE SEE ALL PICTURES FREE SHIPPING TO THE LOWER 48 STATES FULLY INSURED ANY QUESTIONS. PLEASE ASK THANKS FOR LOOKING! Payment needs to be received within 2 days of auction ending(unless contacted) or an unpaid item notice will be issued and the item will be relisted. Illinois residents will need to pay Illinois Sales Tax Will ship the least expensive way. If you are not happy with your purchase and need to leave less than a 5 star rating. Please contact me before leaving feedback, so I can correct the problem. Buyer responsible ... morefor return shipping cost if not happy with purchase. MONEY BACK GUARANTEE! inkfrog terapeak. I000000.
|
|
|
Vintage Wall Register Heat Vent Cold Air Return Grill 32" x 9 with 3 inch base
Nice vintage steel return air register/grille. As a return air register. There is no damper. Size is 32 inches wide by 9 inches tall. Depth at top is one inch and depth at the bottom is 3 inches. Very little if any rust. It does need some scraping and sanding and should look good with a fresh coat of paint. Buy tonight and have it shipped tomorrow with fast, USPS Priority service! No waiting!
|
|
|
(2) Vintage Metal Floor Heat/ Cold Air Return Grates 26' X 8" Sturdy & Solid
Two metal(steel) floor register grates 26" x 8" outside measurement. 24" x 6" inside. Grates are old with light rust in spots, but very sturdy and solid. Sold as Is. Please ask questions and will provide additional photo's if needed. Flat fee of $12.00 for Shipping.
|
|
|
Vintage Antique Wood Floor Grate Cold Air Return 1.25" thick 20.25"x14" Wooden
Vintage Antique Wood Floor Grate Cold Air Return 1.25" thick 20.25"x14" Wooden Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Vintage Antique Wood Floor Grate Cold Air Return 1.25" thick 20.25"x14" Wooden Condition Notables: Great shape! Ready to use! What a Great Find! The pictures tell the story. Sold as it is in the pictures! We are not perfect. We are not experts. So if you receive an item that does not meet your satisfaction. Please contact us. We will do everything we can to allow you to be a happily satisfied customer. What else can I say. Email with any questions. Thanks for looking! We Gladly combine shipping. We DO NOT ship to APO's. We ship most items via USPS and ship within 2-3 days of receiving Payment PLEASE. IF YOU HAVE A PROBLEM OR COMPLAINTS ... moreAFTER RECEIVING YOUR ITEM, CONTACT ME AND WE WILL WORK THINGS OUT PRIOR TO JUST GIVING ME NEGATIVE OR NEUTRAL FEEDBACK! THANK YOU! We ship most items USPS and ship within 2-3 days of receiving payment. We gladly combine shipping. Payment must be received within 7 days of purchase inkfrog terapeak. I000000. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-145d371e641-0x113-
|
|
|
VINTAGE IRON FLOOR COLD AIR REGISTER - 19 3/4" x 13 3/4"
THIS AUCTION IS FOR A VINTAGE IRON FLOOR COLD AIR REGISTER. IT IS IN VERY GOOD VINTAGE CONDITION. CLEAN. BLACK PAINT. THERE IS SOME WHITE PAINT ON THE OUTER EDGES. IT HAS 3 REINFORCEMENT BARS. MEASURES 19 3/4" x 13 3/4" I SHIP DAILY ACCEPT FOR WEEKENDS. PAYMENT TO BE RECEIVED WITHIN 5 DAYS OF WINNING BID.
|
|
|
OLD VINTAGE COLD AIR GRATE CAST IRON 18 X 26 1/4 LONG
YOU ARE BIDDING ON A OLD VINTAGE COLD AIR GRATE. THERE ARE NO BRAKES IN IT. IT IS 18 BY 26 1/4 LONG.IT IS MADE OUT OF CAST IRON.THANK YOU ALL FOR LOOKING. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-146145fb865-0x103-
|
|
|
Vintage Antique Wood Oak Grate Cold Air Return? 14-1/2"x10-1/4"x 3/4" Wooden OLD
Vintage Antique Wood Oak Grate- Cold Air Return? SIZE: 14-1/2" x 10-1/4" x 3/4" I do not know what this is but it is made out of Oak. It's a very well made. Neat, old item. We certainly don't see craftsmenship like that anymore! It may be an old wood cold air return grate/wall register? Someone was using it as a wall decoration and screwed the gold colored hanger on the back of it. I have removed the hanger) Please carefully examine all the pictures as they are part of the item's description and bid only if you are confident that the item's condition is acceptable. And always. Please ask any questions before bidding. I do my very best to provide my customers. Quality items, fast shipping, accurate descriptions, prompt emails, and the best customer service and courtesy possible. I am a long time seller and customer ... moresatisfaction is very important to me. Thank you. ACCEPTABLE PAYMENT: PayPal. Payment is required within 24 hours of the auction's end. IMMEDIATE SHIPPING- No long wait periods to receive your item. Your item will be carefully packaged and shipped via USPS. Within One(1) business day of payment being received and processed(Excluding Weekends& Holidays. Payments received on Friday, Saturday, Sunday or a Holiday will be shipped on Monday or the first day USPS shipping is available. SHIPPING: USPS STANDARD with TRACKING $8.95 in the Continental United States ONLY.
|
|
|
Vintage Antique Wood Floor Grate Cold Air Return 14 3/4" x 12 5/16" x 1 3/16"
Here is your chance to own this vintage wood floor grate or cold air return. Measures 14 3/4" x 12 5/16" x 1 3/16" In Very Good condition with a few chips on under side of grate. Has a couple areas on under side that have missing wood chipped off. Could be replaced or sanded down. A few slats are a little loose, may need to be re-glued or re-finished, I'll let you do it! Overall it should be very sturdy with the proper repairs. Sold as is, no returns. See photos for details. Don't let this one pass you by. Guaranteed fast shipping. Paypal accepted. Check out our other auctions! If you're pleased with your item. Please leave positive feedback and I'll do the same: Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
anique vintage cast iron floor wall register cold or hot air grate vent 16 by 24
rustic antique wall or floor register for cold or hot air return. solid cast iron 6 by 24 inches sq. Sold as is. please view photos and email me with any questions. this item will only ship in the us only. paypal please) thanks for looking and good luck bidding.
|
|
|
ANTIQUE VINTAGE ARCHITECTURAL CAST IRON FLOOR GRATE COLD AIR RETURN VENT
A very nice cast iron floor grate. It has been bead blasted.took awhile to get the years of paint off! I see no breaks in the metal. There is a slotted area on the side which is for a vent lever or adjusted. Measures 11 3/4" x 13 13/16" FREE SHIPPING!
|
|
|
Vintage Large Cold Air Return Decorative Grille Antique Floor 3415-14
Vintage Large Cold Air Return Decorative Antique Grille. Antique rust. No chips. Cracks, or breaks. Overall good condition. Please refer to the pictures below and feel free to ask questions. Thank you! Measures approx: Overall- 10 3/4" width x 46 1/4" height Rough opening- 8 3/4" x 44 1/8" template design by erns-eporium
|
|
|
Vintage Large Cast Iron Scroll Cold Air Return Floor Grate Antique 3413-14
Vintage Large Cast Iron Scroll Pattern Cold Air Return Grate. Antique black paint with a rusty patina. Overall good condition. Please refer to the pictures below. Thank you for looking! Measures approx: Overall: 18 1/4" width x 26 7/8" height Rough opening: 16 1/8" x 24 3/8" template design by erns-eporium
|
|
|
Vintage Large Cast Iron Honey Comb Floor Cold Air Return Grate 3412-14
Vintage Large Cast Iron Honey Comb Cold Air Return Floor Grate. Original antique white paint with a rusty patina. Overall good condition. Please refer to the pictures below. Thank you for looking! Measures approx: Overall: 22 3/8" width x 28 1/2" height Rough opening: 20 1/8" x 26 1/8" template design by erns-eporium.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1471d4a516b-0x107-
|
|
|
Vintage Large Cast Iron Scrolly Victorian Cold Air Return Floor Grate 3411-14
Vintage Large Victorian Scrolly Register. Original rust patina. No chips. Cracks, or breaks. One end of the overall width is 1/8" wider than the other. Overall good condition. Please refer to the pictures below and feel free to ask questions. Thank you! Measures approx: Overall- 29 3/8" width on one end. 29 1/2" on the other, x 29 3/8" height. Rough opening- 26 1/2" w x 27"h. Template design by erns-eporium
|
|
|
Vintage Large Cast Iron Antique Scrolly Cold Air Return Floor Grate 3410-14
Vintage Large Victorian Scrolly Cold Air Return. Painted in its original light green mint color with rust patina. No chips. Cracks, or breaks. Overall good condition. Measures approx: Overall- 23 3/8" width x 31 3/8" height Rough opening- 20 7/8" x 29" template design by erns-eporium
|
|
|
Vintage Wood Cold Air Return Floor Grate 16" x 30"
Measures 30" x 16" x 1 3/16" Made of red oak. One slat with chip. Original finish. No loose slats. Please view all pics for condition. Paypal pymnt due w/in 3 days of auction's close.
|
|
|
Vintage Style Cold Air Return Reggio Register Co. Grille Antique Floor 3504-14
Vintage Style Cold Air Return Decorative Antique Grille. Painted white with a small amount of rust. No chips. Cracks, or breaks. Overall good condition. Please refer to the pictures below and feel free to ask questions. Thank you! Measures approx: Overall- 3.5" width x 16" height Rough opening- 2 1/4" x 14 1/8" template design by erns-eporium
|
|
|
Vintage Cast Iron Scroll Cold Air Return Floor Grate 18 1/4" width x 26 7/8"
Beautiful fancy cast iron cold air return floor grate. A bit rusty and paint is off in places. It can be scrapped down and repainted. No breaks or repairs. Overall: 18 1/4" width x 26 7/8" height If you need another I have one more matching for sale- Please inquire! Thank you for looking. Please let me know if you need more pictures. Pay pal only. US only.
|
|
|
Vintage Bronze Brass Cold Air Return Floor Grate Antique 3565-14
Vintage Bronze Brass Cold Air Return Floor Grate Antique. Honeycomb pattern. Nice solid bronze with some oxidized patina. Overall good condition. Please refer to the pictures below and feel free to ask questions. Thank you for looking. Measures approx. Overall 20 7/8" length x 14" width Rough opening required 19 1/8" x 12 1/8" template design by erns-eporium
|
|
|
Vintage Ornate Victorian Cast Iron Cold Air Return Floor Grate 36" x 36" NEAT!
Up for sale is vintage Victorian cast iron floor grate- vent- register- cold air return. In good used condition. Can be painted. Awesome large size- 36" x 36" Please see pictures for details. Normal 0 false false false EN-US X-NONE X-NONE· All of my items come from a clean. Smoke free home. I am always happy to combine shipping. But do require insurance on items/orders over $50.00 through the USPS, so please wait for an invoice before completing checkout if this applies to your purchase. I will also ship internationally. But request that you contact for a shipping rate before bidding. If you are unsatisfied for any reason when you receive your item. Please contact me first and I will do my very best to resolve the issue. If you have any questions please feel free to ask. Thanks so much for looking!
|
|
|
Vintage Cast Iron Cold Air Return Floor Grate Antique Honeycomb 3614-14
Vintage Cast Iron Cold Air Return Floor Grate Antique. Black grille with original patina. Nice decorative honeycomb pattern. There is a corner of the grille missing. Pictured below. Overall in good condition. Please refer to the pictures below and feel free to ask questions. Thank you for looking. Measures approx. 14" wide x 21" length template design by erns-eporium
|
|
|
Reclaimed Vintage Dark Brown Cold Air Return Stamped Steel, House built in 1936.
This e-bay listing is for a Reclaimed Vintage/ Antique Stamped Steel Cold Air Return Vent/Grate. This measures 32" long and 10" wide. This fits a opening approx. 29 3/4" x 8" wide. As found condition. No breaks, or dents. Dark Brown with Gold over spray. Reclaimed from a recent house Demolition that was built in 1936. I have one more like this one if you need two. Thanks for looking.
|
|
|
Vintage Antique Cast iron Floor Heater Return Cold Air Grate
Pulled from"Our Old House" built in 1907 Return air grate Cast Iron Please view pictures for condition of actual item. Thank you for looking!
|
|
|
Vintage Antique Metal Vent Grate Grill Cold Air Return Flat 14 x 12 Rusty Gold
Up For Auction is a Vintage Antique Vent Grate Grill Cold Air Return Flat 14 x 12. Measures 14" x 12" Has 4 holes for mounting. Very rusty but solid; also has one bent corner. Please see photos for further description and condition. Please ask any questions before bidding. Thanks for looking. Buyers Please Note: Items must be paid for or have made payment arrangements within 7 days of auction end; if payment is not made in this time frame we reserve the right to relist the item. International Bidders/Buyers Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We will not be responsible for items held or lost ... morein Customs. Or any fees associated with Customs. You will be provided with a Delivery Confirmation Number to which you can follow up on the delivery of your item.
|
|
|
Vintage Bronze Brass Cold Air Return Floor Grate Antique -Circa 1899 - Nice!
For sale is a(1) beautiful antique You are bidding on/offering to purchase(1) of the grates for the asking price of $195.00 buy-it-now or best offer. The packaging and shipping to all 48 lower United States is only $20 each. There are four of these grates available for sale individually. These all match and there are no breaks in the grates. THIS SALE IS FOR ONE GRATE ONLY. THERE ARE FOUR AVAILABLE. Don't miss this chance to pickup a matched set of four. If you agree all 4 of the grates then I will combine the shipping and lower it down to $40 flat rate total to all lower 48 United States if you buy all four. This window is very pretty and very well made. The wooden window frame is in nice shape. Please email with questions. These are located in Carbondale. Illinois and available for local pickup as well. Please call or text to(618)201-7362. ... moreThanks for looking.
|
|
|
30"x18" Vintage Antique Stamped Steel Floor Heater Return Cold Air Grate
Steel ~ Salvaged piece. Old West Side Cleveland home. ~ Overall measures 31-3/4" x 19-3/4" inches the actual opening it would fit would be smaller 30" x 18" inches ~ Time has given it several paint color layers. Mild surface rust in spots from storage, very slight sag or bow from perhaps people walking/standing on it or worse yet placing heavy furniture on it, nothing horrible ~ First pic shows it face up. Then a face up corner closeup, then flipped over, then flipped over closeup corner pic. ~ Honest auctions. Prompt shipping- Thank You ~ Fedex Ground. Insured, online tracking, U.S.A. bids only- Thank You ~
|
|
|
Vintage Antique Cast iron Floor Heater Cold Air Grate 32 in long 13 3/4 wide
This is a wonderful vintage heater hot air cold air register. 32 long 13 3/4 wide bottom vent 11 1/2 wide. So many options for this beautiful piece use it in your home. Décor, message board, so many more options. Don't pass this wonderful piece up starting now for 3 day auction only at $25.00 shipping at $20.00
|
|
|
Vintage Cast Iron Floor Wall Cold Air Return Heating Grate Vent 29 X 18 - 22lbs
Vintage Cast Iron Floor/ Wall Cold Air Return Heating Grate Vent 29" X 18' Up for Auction I have listed this Victorian Cast Iron Floor or Wall Cold Air Return Heat Grate Vent. This item measures 29" X 18" This item is being sold as in found condition as described. There are two places in the center of the mandala designed pattern that has 2 piece missing. Which is very hard to notice, very minor and does not hurt this item, I believe? This Cast Iron Cold Air Return Vent in quite heavy, weighing 22 Lbs so consider that if bidding on this item. Please view item listed for a visual description as well, you will notice that there is on the back side of this item 7 rubber ring attached to the back. There are three on each side and one in the center totaling seven in all. Non are missing. Why they are there I have no idea? Thank ... moreyou for viewing this item and have a most Blessed Day. Shipping charges are calculated according to the buyer’s zip code. All items shipped Priority Mail through the US Postal Service unless other arrangements are made PRIOR to the auction end. eBay would like as well as the seller that All Items purchased need to be paid for within three working days so as to complete sale. If there is a problem with not being able to make payment within that time period. Please notify me as to when you will pay for your purchase. All items sold“AS IS” as described. All Item are Insured Free of Charge. Please ask your questions before you bid and well before the auction ends. I answer all questions within 24 hours(daily) I ship all items the same day as your payment is made as long as the Post Office is opened: hours are from 9:00 AM- 4:00 PM. Saturday post office is closed at 11:30 AM. Thank You and have a great day. We DO NOT SHIP GLOBALLY anymore due to lack of control and insurance once a package leaves the U.S. With no recourse for the seller as well as the buyer.
|
|
|
Cold Air Grate Return Register 12" x 32" Antique Vintage Floor Register
Antique cold air return. Measures 12" x 32" overall 9-1/2" x 29-1/2" hole opening. Please look closely at all pictures for condition before purchasing. Thank you very much for looking.
|
|
|
Large Vintage Cast Iron Round Floor Drain Cold Air Return Old Texas Star 3795-14
Nice antique round cast iron drain cover. It could possibly be used as a clod air return but the old brass locks will stick up from the floor approx 3/8" The old brass locks are the large half round slotted screws that were most likely used to lock the the drain cover into its surround. This piece is covered in very chippy old black paint. There are no cracks. Chips, or breaks. It has a very decorative star at its center. Overall it is in good solid condition. Please look over the pictures and ask questions when needed. Thanks for looking Measures approx: With surround 24" diameter, would need a 21 5/8"opening, Without Surround 21"diameter, would need a 19 1/8"opening
|
|
|
Vintage Cast Iron Cold Air Return Floor Grate Antique honeycomb 14 x 17 Old
NICE OLD VINTAGE CAST IRON FLOOR GRATE. MEASURES 14" X 17" AND IS IN GOOD CONDITION FOR ITS AGE.NO CRACKS.IT IS OLD AND RUSTY SO WILL NEED CLEANED UP IF YOU ARE GOING TO REPAINT, OR LEAVE IT ALONE TO RETAIN THAT AGED LOOK. SHIPPING TO U.S. ONLY. ALL ITEMS SOLD AS IS. THANKS AND GOOD LUCK!
|
|
|
Vintage Metal Cold Air Return Floor Vent 28 1/4 x 14 5/8 inches
Selling a vintage cold air return floor vent. Under the grime it has a faded wood grain look.
|
|
|
Large Antique Gothic Cast Iron Cold Air Return Vintage Old 30" x 30" 4026-14
Very nice large antique cast iron cold air return. Has a decorative Gothic pattern. There is 1 hair line on the edge it does not affect the structural integrity of the grate. It has rust and some minor pitting. Overall good usable condition. Measures approx: 29 3/8" X 29 3/8" overall. Would need a rough opening of 27" X 27"
|
|
|
Antique Cast Iron Cold Air Return Gothic Vent Register 20 1/8" X 16" Old Vintage
Antique cast iron cold air return floor grate vent with a Gothic pattern. It undamaged has no cracks. Chips, or breaks. It has some rust mostly around the edges where the brown paint is worn. Overall it is in good condition. Please look over the pictures and ask questions when needed. I accept PayPal or cash on pickup. Thanks for looking. Measures approx. 22 1/4" x 18" overall. 20 1/8" X 16" rough opening.
|
|
|
Reclaimed Vintage Black Steel Cold Air Return Vent.14 X 12" 1939 Farm House
This Ebay listing is for a Reclaimed Vintage Steel Black painted Decorative Register/Cold Air Return Vent. This Fits a 10" X12" Opening. With the face measuring 12" X 14" as Found" Condition, Some chipped paint. No Cracks or breaks. needs cleaned and repainted. This came from a old farm house that was built in the late 1930's that I tore down.Thanks for looking.
|
|
|
Vintage Heat And Cold Air Return Vents
Nice package containing 1 wall mount heat vent and 1 cold air return vent also wall mount. Please see pictures for details. These have been refinished/ restored. Finish looks great but not perfect. Some nicks. Also some paint runs but still ready to use. See pictures. Heat vent 11 1/2" H x 15 1/2" W x 2" D. Cold air return 12 1/2" H x 17 1/4 W x1 1/4" D. Black spray paint finish.
|
|
|
Vintage Heat And Cold Air Return Vent Covers
Heat and cold air return vent cover pair. These have been refinished and spray painted in evergreen. Both are for wall mount application. Heat vent measures 11 3/4" h x 15 3/8" w x 2" d. Cold air return is 12 1/2" h x 17" w x 1" d. The cold air return has some waffle to edge.
|
|
|
Antique Cast Iron Register Vent Cold Air Return Sunburst Vintage Old 4202-15
Antique cast iron heat grate register vent. The louvers are missing but it could be used as a cold air return. It has a great sunburst pattern with 2 detail pieces broke and missing. Overall it is in good condition. Please look over the pictures below and ask questions when needed. Thanks for looking Measures approx: 11 3/4" x 9 3/4" overall. 8" x 10" opening.
|
|
|
Reclaimed Vintage Cold Air Black Steel Return Vent Cover ~ 13 5/8" x 11 5/8"
This is a Nice Reclaimed Vintage Black Steel Register Cold Air Return Vent Cover. It will fit a hole of 11 5/8" x 13 5/8" The face is 15 7/8" x 13 7/8" Needs cleaned. Can easily be restored and painted. See photos. Notice I am offering 2 different shipping methods. Thanks and have a great day.
|
|