WILCOX CRITTENDEN CHROME OVER BRASS BRONZE BOAT CLAM SHELL COWL VENT
This is a Wilcox Crittenden chrome over brass boat cowl or clam shell vent we found in a boat salvage yard. It measures about 5 inches long. 2 inches tall and 4+5/8 inches wide. It needs replating. It would be great for reuse or decorating a nautical room. If you really wanted you could clean it up and make it look nice but you can't buy the worn and used look! Very very neat! You are bidding on the vent only and nothing in the background. We accept Paypal. Buyer pays actual shipping! No handling fees! We expect payment within 10 days or appropriate feedback will be left. We love to combine shipping on multiple purchases when we can! Be sure to check out our other beachcombed items! We have a ton right now! New items will be listed daily for the next few weeks! All new stock! Thanks for looking and happy bidding! BEACHCOMBERS BOUNTY
|
|
TINY STEEL BOAT SHIP ENGINE COWL VENT
This is a tiny steel vent we found in a boat salvage yard. It measures about 3+1/2 inches wide. 1+3/8 inches wide and 7/8 inches tall. It needs repainting or replating. It would be great for reuse or decorating a nautical room. If you really wanted you could clean it up and make it look nice but you can't buy the worn and used look! Very very neat! You are bidding on the vent only and nothing in the background. We accept Paypal. Buyer pays actual shipping! No handling fees! We expect payment within 10 days or appropriate feedback will be left. We love to combine shipping on multiple purchases when we can! Be sure to check out our other beachcombed items! We have a ton right now! New items will be listed daily for the next few weeks! All new stock! Thanks for looking and happy bidding! BEACHCOMBERS BOUNTY
|
|
HUGE VINTAGE MILITARY WAR SHIP COWL VENT , INDUSTRIAL MACHINE AGE STEAM PUNK
HUGE VINTAGE MILITARY WAR SHIP COWL VENT. INDUSTRIAL MACHINE AGE STEAM PUNK. HUGE 25-1/2" DIAMETER X 32-1/2" HIGH. This auction is for ONE VENT ONLY, the one on the left in the pictures. The other vent has already sold. I am guessing that these are from military ships from the color and we had a Navy Base in our state since WWII, the buyer should decide. I am in the center of RI. About an hour south of Boston and 2-1/4 hours east of NYC. Please let the pictures help with the description and condition and view my other auctions for more TOOLS. Check my feedback, satisfaction guaranteed.
|
|
12+1/2 INCH TALL BRASS BOAT COWL VENT FOR BOAT SHIP DECOR BRONZE
This is a brass boat cowls or vents we found in a boat salvage yard. It measures 12+1/2 inches tall and 8+1/2 inches wide. The base is a 4 inch deck plate. It would be great for reuse or decorating a nautical room. If you really wanted you could clean it up and make it look nice but you can't buy the worn and used look! Very very neat! You are bidding on the vent only and nothing in the background. We accept Paypal. Buyer pays actual shipping! No handling fees! We expect payment within 10 days or appropriate feedback will be left. We love to combine shipping on multiple purchases when we can! Be sure to check out our other beachcombed items! We have a ton right now! New items will be listed daily for the next few weeks! All new stock! Thanks for looking and happy bidding! BEACHCOMBERS BOUNTY
|
|
PVC 4 INCH BOAT COWL VENT FOR BOAT SHIP DECOR
This is a pvc boat cowl or vent we found in a boat salvage yard on the Washington coast. It measures about 10 inches tall and the base is about 4 inches outside diameter. It would be great for reuse or decorating a nautical room. If you really wanted you could clean it up and make it look nice but you can't buy the worn and used look! Very very neat! We accept Paypal. Buyer pays actual shipping! No handling fees! We expect payment within 10 days or appropriate feedback will be left. We love to combine shipping on multiple purchases when we can! Be sure to check out our other beachcombed items! We have a ton right now! New items will be listed daily for the next few weeks! All new stock! Thanks for looking and happy bidding! BEACHCOMBERS BOUNTY
|
|
OLD BRASS BRONZE BOAT CLAM SHELL COWL VENT FOR BOAT SHIP DECOR
This is a brass boat cowl or clam shell vent we purchased. It measures about 7+3/8 inches long. 2+7/8 inches tall and 6+3/8 inches wide. The underside is painted white. It would be great for reuse or decorating a nautical room. If you really wanted you could clean it up and make it look nice but you can't buy the worn and used look! Very very neat! You are bidding on the vent only and nothing in the background. We accept Paypal. Buyer pays actual shipping! No handling fees! We expect payment within 10 days or appropriate feedback will be left. We love to combine shipping on multiple purchases when we can! Be sure to check out our other beachcombed items! We have a ton right now! New items will be listed daily for the next few weeks! All new stock! Thanks for looking and happy bidding! BEACHCOMBERS BOUNTY
|
|
Old Teak Dorade Box And Cowl Vent Set Of 2
Well worn but solid. Copper/brass fittings. Vent is made of rubber. Box Measures 11 x 5.5 x 5 Posted with
|
|
BRASS PERKO 3 INCH VENT BRONZE COWL VENT FOR BOAT SHIP (#B)
This is a brass vent we purchased from a scrap yard. It measures about 1+5/8 inches tall. 6+1/8 inches long and 3+7/8 inches wide. It would be great for that restoration project, for reuse or decorating a nautical room. You are bidding on the vent only and nothing in the background. We accept Paypal. Buyer pays actual shipping! No handling fees! We expect payment within 10 days or appropriate feedback will be left. We love to combine shipping on multiple purchases when we can! Be sure to check out our other beachcombed items! We have a ton right now! New items will be listed daily for the next few weeks! All new stock! Thanks for looking and happy bidding! BEACHCOMBERS BOUNTY.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1440be304e3-0x100-
|
|
OLD 5 INCH TALL GALVANIZED FUNNEL DORADE COWL VENT FOR BOAT SHIP
This is a galvanized vent we purchased. It measures about 4+7/8 inches tall and 4+7/16 inches wide. The hole in the bottom is 1+3/8 inch inside diameter or 2+1/4 outside diameter. It would be great for that restoration project. For reuse or decorating a nautical room. You are bidding on the vent only and nothing in the background. We accept Paypal. Buyer pays actual shipping! No handling fees! We expect payment within 10 days or appropriate feedback will be left. We love to combine shipping on multiple purchases when we can! Be sure to check out our other beachcombed items! We have a ton right now! New items will be listed daily for the next few weeks! All new stock! Thanks for looking and happy bidding! BEACHCOMBERS BOUNTY
|
|
PERKO CHROME BOAT CLAM SHELL COWL VENT SCOOP BOAT SHIP (#F)
This is a Perko chrome boat cowl or vent we found at a local sale. It measures about 4+1/2 inches long. 1+5/8 inches tall and 3+3/4 inches wide. It has some minor scratches on the chrome. It would be great for reuse or a restoration project. You are bidding on the vent only and nothing in the background. We accept Paypal. Buyer pays actual shipping! No handling fees! We expect payment within 10 days or appropriate feedback will be left. We love to combine shipping on multiple purchases when we can! Be sure to check out our other beachcombed items! We have a ton right now! New items will be listed daily for the next few weeks! All new stock! Thanks for looking and happy bidding! BEACHCOMBERS BOUNTY
|
|
PVC 4 INCH BOAT COWL VENT FOR BOAT SHIP GREAT DECOR ITEM (#C)
This is a pvc ship cowl or vent we found in a boat salvage yard on the Washington coast. It measures about 8+1/2 inches tall. 5+5/8 inches wide and the base is about 4 inches outside diameter. It would be great for reuse or decorating a nautical room. If you really wanted you could clean it up and make it look nice but you can't buy the worn and used look! Very very neat! We accept Paypal. Buyer pays actual shipping! No handling fees! We expect payment within 10 days or appropriate feedback will be left. We love to combine shipping on multiple purchases when we can! Be sure to check out our other beachcombed items! We have a ton right now! New items will be listed daily for the next few weeks! All new stock! Thanks for looking and happy bidding! BEACHCOMBERS BOUNTY
|
|
Antique Marine Boat Ship Cowl Vent Pipe Chrome over Brass
Selling an antique maritime boat or ship cowl vent. I believe this is made of brass with a chrome finish over it. It must have come off a large ship or boat as it is quite large and heavy. The cowl itself is over 13 pounds. Approximately 11" high by 5" deep by 8" wide, the vent pipe inside diameter is approximately 7 1/4" It is mounted on a wood base that is 5 1/2" high. So, the total height is almost 17" There is a makers marking on the inside that appears to be the letter C over the letter W. This came out of an estate of a man who had his basement filled with nautical items from the east coast area, and it was mounted on his wall. Great man cave piece. E-mail with any questions or for additional photographs. I try to be overly detailed when explaining the condition of items I am selling. I pack items very ... morewell to avoid damage during shipping. Paypal for payment. Payment must be received within 3 days at end of auction. Packages will be sent USPS Mail within 3 days of payment. Delivery confirmation is included. I will contact you with total cost after the auction has ended. We do combine shipping for multiple purchases.
|
|
ANTIQUE VINTAGE WOOD BOAT SAILBOAT PART PAIR COWL VENT AIR SCOOP HARDWARE perko
Here we have a nice Matching pair of boat Cowls or Air Scoops that while not marked were found in with a bunch of PERKO parts and i think they may have been made by them. They measure about 10 1/2 inch tall. Base is about 4 3/4 inch across from edge of flange to edge of flange. Scoop mout is about 7 1/2 inch across. They look to be made out of brass that has been plated. they are in VERY GOOD condition though the one has a small section removed probably to clea something, please see my close up photo where i am pointing at this area. Some wear to the finish but again please see the photos.Nice matching set of boat cowls that I think you will like.Starting auction off low with no reserve and as always actual postage charged dependiong on where you live[weighs just over 4 lbs boxed to ship]If cheaper can ship in the USA flat rate box for $12.35
|
|
Vtg Vent Air Nautical Boat Sail Clam Shell Cowl Rat Rod Assemblage Steampunk pr
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 I have some wonderful maritime assemblage pieces that I am listing individually. They are a terrific piece of vintage maritime history. The perfect aged patina is something that takes many years to duplicate. These would be a beautiful addition to your sea fare. Marine, nautical or maritime décor. A gorgeous piece of fishing boat salvage! This was used as an air vent or scoop and would be perfect for your next boat project or rat rod! How awesome this piece would be to use for assemblage. Anything you can dream up! Measurements are 4 3/4” x 4” Alaska. Hawaii, and international buyers, please contact me for shipping costs. I will gladly combine shipping of multiple items that fit in one box. Be sure to check out our other Items! Please ask all questions before purchase ... moreand thanks for stopping by Hippie Hog! Find us on facebook HippieHog- Just a side note about all of our Vintage Glassware and other Vintage Style Pieces: All of our vintage pieces have beautiful character& are pre-owned& gently used. In fact. Some items may have been well loved and used daily for many years, and can be used for many years to come. Naturally, our pieces may show some signs of wear, loss of shine, or have minor flaws. Unless otherwise noted in our description. This, I believe adds to the wonderful character that these pieces show and does not detract from their beauty or future usability, in reality, they add considerably to lure of the vintage charm that is desired and loved by many. We hope that you will have the same opinion! Feedback: Customer Satisfaction is# 1 in our opinion. If for any reason you are unable to provide a 5 star rating, contact us before leaving feedback and we will do what it takes to earn the 5 star rating feedback from you. We leave our feedback after you have left feedback for us. This is because we do not feel the transaction is complete until we kno
|
|
Non-Metallic Cowl Vent 5" x 2" Opening
Non-Metallic Cowl Vent. 5" x 2" opening. 5 1/2" tall overall. 3" diameter opening below deck. Salvaged from sunken sailboat. Can be used as a functional vent. Great for nautical/beach décor.
|
|
VINTAGE JIM GIBBS MARINE DIGEST TROPHY DESKTOP marine boat air vent cowl
This was a piece of nautical history that was owned by author JIM GIBBS.It has property of JIM GIBBS MARINE DIGEST.Inside it has a Seattle address in it.Very cool one of a kind piece of maritime history.E MAIL WITH ANY QUESTIONS.Has some wear and scratches from age and look's like it is made of fiberglass.APPROX 10 INCHES HIGH. I
|
|
PERKO #3 BRONZE COWL VENT, DORADE, FUNNEL, BOAT SAILBOAT TUGBOAT BRASS, ANTIQUE.
This has been in my garage for at least twenty years and was my Father's before that.It is complete with the two base plates.Key and even the brass screws(not shown) Please see the measurements in the photos and ask any questions. It is in very good original patina with all parts included.All brazing is perfect.Bid with confidence that you will purchase a beautiful piece of history that you might use on a restoration project or add to your collection. Please see my feedback.Good luck!
|
|
VINTAGE VENT SCOOP DORADE FUNNEL COWL SHIP BOAT CAST BRONZE/BRASS CHROME PLATE
This is a bronze/brass boat vent. Funnel or dorade. It is thick compared to new vents. It weighs approx. 3 ½ lbs. The inside diameter of the opening measures approximately 5” x 3 1/2“ The inside diameter of the deck fitting is approx. 2 ⅜’ diameter. The flange on the opening is approx. 3 1/2“ in diameter. The chrome is pitted and it has a beautiful patina on the inside. This would be great for your restoration project or a lovely piece of nautical décor! See photos for description and condition. Please contact me with questions. Thank you for looking.
|
|
Vintage Chrome Plated Solid Brass Nautical Ship Boat Cowl Air Vent Steampunk
It measures 10 1/4" high x 5" deep with a 5" x 7" opening on top and a 3" opening at the bottom. Has light pitting with some loss of plating at the base and it weighs over 10 pounds. 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-1480c434129-0xf0-
|
|
Vintage 9 1/2" Nautical Ship / Boat Brass Vent. Cowl Vent Scoop
In good condition with patina. 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-14833971406-0xfc-
|
|
Boat 9+ INCH TALL STAINLESS FUNNEL DORADE COWL VENT
Used 6" stainless steel cowl vent 9" tall. Thread diameter 3" Ready for paint usually red or white. Absolutely mint condition. No base although readily available at suppliers. Posted with
|
|
VINTAGE VENT SCOOP COVER FUNNEL COWL SHIP BOAT CAST BRONZE/BRASS
UP FOR AUCTION" IS THIS LARGE(BRONZE)BOAT/VENT/COWLING.COVER? NOT SURE? ITS 17"3/8"X10" AT THE WIDEST,12/LBS, SPH/U.S.A.ONLY $17.99
|
|
Large Antique Vintage Copper Brass Bronze Vent Scoop Dorade Funnel Cowl Boat
This is a very old ship's cowl vent. The main body of it is copper. The flange is either brass or bronze. Not sure. Overall length is 16" Funnel diameter is 8" The bottom opening is about 4" Shipping is $15.00 within the continental USA(which is quite reasonable as this is a large, heavy item) I am selling lots of other vintage marine hardware. Checkout my other listings. Thanks for looking!
|
|
5+1/8 INCHES CLAM SHELL BRASS BOAT COWL VENT FOR BOAT SHIP BRONZE (#V34)
This is a brass boat cowl or vent we found in a boat shed. It measures about 5+1/8 inches long. 2 inches tall and 5+1/16 inches wide. They would be great for reuse or decorating a nautical room. We accept Paypal. Buyer pays actual shipping! No handling fees! We expect payment within 3 days. We love to combine shipping on multiple purchases when we can! Be sure to check out our other beachcombed items! We have a ton right now! New items will be listed daily for the next few weeks! All new stock! Thanks for looking and happy bidding! BEACHCOMBERS BOUNTY 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14be0fdc59d-0x103-
|
|
Vintage Brass and Copper Boat Cowl or Vent Marked by Maker.
Item: This auction is for a Vintage Brass and Copper Boat Cowl or Vent Marked by Maker. Size: The Vent measures 12 ½” tall and has an 8” in diameter opening. The base has a 4 5/8” inside diameter. Marks: Marked as shown. This is made of heavy. Solid brass and copper, it is very solid. Condition: Nice used condition. It looks like it was polished and liquored a long time ago. It has numerous small dents accumulated through the years but has no splits or repairs. Please use the photos as part of the description. I do not have a buy it now price. Shipping: This will be shipped in a box measuring 18” by 15” by 14” and will weigh 6 Lbs. Please feel free to inquire by Email. Your interest and bids are appreciated. New York State residents must supply valid NYS resale number or pay 7% sales tax.
|
|
bronze dorade cowl vent scoop sailboat
For your consideration are a pair of bronze dorade vents. They are very well made and substantial pieces. They are porcelainized? on the inside with white porcelain to prevent staining. They are the lower profile which is more desirable on deck. They are very good quality pieces to bejewel the best of sailing vessels. Yes form follows function and these are well formed and should provide good service for many generations to come. The makers mark can be seen in photos.
|
|