|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$31.86 Shipping Condition: Used Location: Oconto Falls, United States Has a great modern machine age look. Unusual riveted feet. The stool is built like a tank! A couple of tight age or drying cracks in the wood. The images ... moreshow condition of the item.
Buy It Now
$59.85 Shipping Condition: Unspecified Location: Canfield, United States Adjusts 27” To 31” - Beautiful Seat - Nice. 15” round x 1” thick seat is flawless. Great looking Beautiful TOLEDO STOOL !
Buy It Now
$65.85 Shipping Condition: Unspecified Location: Canfield, United States Legs adjust from 16" to 22" high. Seats are 15" X 15 1/2" square and have wood board centers that have a few marks from normal wear. Stools are structurally ... moreexcellent, and have great looking round foot rings.
Buy It Now
$89.00 Shipping Condition: Used Location: Swedesboro, United States We try to fully describe each piece in an attempt to let you know exactly what you will be receiving. Close-up photos often cause the finish color to ... moreappear lighter or surface imperfections to appear larger or more severe than when the item is viewed directly.
Buy It Now
$90.00 Shipping Location: Marshalltown, United States Chippy, used item. Shows signs of use and age. Worn so might wobble on the seat a little. Sold as is. Type: Stool Chair. Adjustable seat. Heavy Stool!
Buy It Now
$234.61 Shipping Condition: Used Location: Linden, United States This is Industrial stool #1. There are no breaks or repairs. Local pickup is accepted and preferred.
Buy It Now
$234.61 Shipping Condition: Used Location: Califon, United States This is Industrial stool #3. There are no breaks or repairs. Local pickup is accepted and preferred.
Buy It Now
$234.61 Shipping Condition: Used Location: Linden, United States This is Industrial stool #4. There are no breaks or repairs. Local pickup is accepted and preferred.
Buy It Now
$234.61 Shipping Condition: Used Location: Califon, United States This is Industrial stool #2. There are no breaks or repairs. Local pickup is accepted and preferred.
Buy It Now
$29.34 Shipping Condition: Used Location: San Bernardino, United States
Buy It Now
$60.00 Shipping Condition: Used Location: Mooresville, United States For auction is one fantastic vintage Domore swivel drafting stool from the 1940s/early 1950s. It is in excellent original condition. Including the vinyl ... moreupholstery. It is painted a dark military green color. The vinyl is almost perfect but for one tiny area of wear on the front corner of the seat(pictured) All mechanical functions work properly. The seat height adjusts from 23.5"28.5" and the seat itself is 17" wide by 12" deep. The foot ring is 18" in diameter. The backrest is adjustable by resetting the screws in the armature assembly that supports it. There is some wear to the top of the footrest. The entire stool has been thoroughly cleaned and detailed and is ready for immediate use. SHIPPING: This stool will ship via FedEx Ground/Home Delivery unless otherwise requested. Also available for free local pickup. Thanks for looking. Good luck bidding, and feel free to ask any questions. OBJEKTIFIED
Buy It Now
$30.39 Shipping Condition: Used Location: Chicago, United States Chicago Industrial Factory Steel Stool. Seat is standard Pollard 14" real wood. Industrial Classic ! Height of seat is 19 1/2".
Buy It Now
$50.26 Shipping Condition: Used Location: Chicago, United States Lyon AntiqueIndustrial Factory Steel Stool. 9 lbs - Each. Footprint is 15" x 15".
Buy It Now
Free Shipping Condition: Unspecified Location: Cleveland, United States Arts & Crafts or Mission Oak period.
Buy It Now
$89.00 Shipping Condition: Used Location: Voorhees, United States We try to fully describe each piece in an attempt to let you know exactly what you will be receiving. Close-up photos often cause the finish color to ... moreappear lighter or surface imperfections to appear larger or more severe than when the item is viewed directly.
Buy It Now
$89.00 Shipping Condition: Used Location: Voorhees, United States We try to fully describe each piece in an attempt to let you know exactly what you will be receiving. Close-up photos often cause the finish color to ... moreappear lighter or surface imperfections to appear larger or more severe than when the item is viewed directly.
Buy It Now
$79.55 Shipping Condition: Used Location: Bluffton, United States Tested and Working Industrial Green Stool made by Adjustrite in Bowling Green Ohio. Please study pictures closely and feel free to ask questions. Thanks!
Buy It Now
$15.00 Shipping Condition: Used Location: Sandusky, United States Nice heavy duty swing out (swivel) seat for sale. Heavy cast iron If you have any questions please let me know thanks and good luck Also have a matching ... moreseat listed if your interested in two.
Buy It Now
$77.61 Shipping Condition: Used Location: Acton, United States Up for sale is this vintage industrial metal swivel/adjustable drafting stool. This stool measures 17" by 17" and adjusts from 28" to 32 ... more1/2" tall. It has nice wear from age as pictured that gives it a great look. Structurally it is in good condition. Very solid and functional. Ask if you have any questions and thanks for looking.
Buy It Now
$41.26 Shipping Condition: Used Location: Chicago, United States BACKS ARE ADJUSTABLE & REMOVABLE. Seat is 14" round. Height of seat is 24.5". See ALL pictures. ( all sizes APPROX.).
Buy It Now
$40.00 Shipping Condition: Used Location: River Falls, United States Up for bidding is this gorgeous steampunk industrial red drafting/ piano stool. This would make a great barstool in either an industrial modern or country ... morekitchen. It has chippy red paint. The seat is wood and through the red chips it reveals a sage green underneath. The legs are cast iron at the top and wood at the bottom. It adjusts from 20" to 25" There is a small cut in the rim of the seat(see photo) which tells part of it's story that someone was using it as a saw horse. The cross bar mount under the seat is missing 2 of its screws(easily replaceable) I tried taking pictures of it from every angle possible. If you need any close-ups of anything or have any questions. Please feel free to ask. It is a super cool stool!
Buy It Now
$111.23 Shipping Condition: Used Location: Mount Vernon, United States ITEM: Antique industrial drafting or work stool with height adjustable swivel seat, cast iron hardware, walnut wood seat and Hickory (?). Seat height ... moreis adjusted by turning the wheel crank under the seat.
Buy It Now
$72.87 Shipping Condition: Used Location: Johnstown, United States Industrial Adjustable Stool. original stunning orange finish. both work fine.
Buy It Now
$99.09 Shipping Condition: Used Location: Cleveland, United States I try to describe the item as best I can and take as many photos as possible. LOOK AT ALL PHOTOS. MY PHOTOS ARE PART OF THE CONDITION REPORT, SO REVIEW ... moreCAREFULLY.
Buy It Now
$33.24 Shipping Condition: Used Location: Chicago, United States Chicago Industrial Factory Steel Stool. Seat is standard 14" round Pollard molded wood. Many years of use, & a bit of paint, & chipping !
Buy It Now
$52.39 Shipping Condition: Used Location: Chicago, United States BACK is ADJUSTABLE ( Back also REMOVABLE). Seat is 14" round. Height of seat is 27 1/2". ClassicsIndustrial Factory Steel Stool. See ALL pictures. ( all ... moresizes APPROX.).
Buy It Now
$32.32 Shipping Condition: Used Location: Chicago, United States BACKS ARE ADJUSTABLE & REMOVABLE. 16 lbs - Each. Footprint is 14" x 14". Height of seat is 24.5".
Buy It Now
$15.00 Shipping Condition: Used Location: Sandusky, United States Nice heavy duty swing out (swivel) seat for sale. Made from the American writing machine Co. Heavy cast iron If you have any questions please let me know ... morethanks and good luck
Buy It Now
Free Shipping Condition: Unspecified Location: Omaha, United States As is. As shownOne leg has a small bend in itOne foot missing rubber stopper footPlease see photos for cosmetic details
Buy It Now
Condition: Used Location: Lexington, United States Nice worn patina. Heavy duty frame. Little wear on the vinyl. Multiples available, condition may vary. Local pickup at the moment. Measurements are approximate
Buy It Now
$50.00 Shipping Condition: Used Location: Decatur, United States VEIW PHOTOS FOR MEASUREMENTS. BOTH IN USED VINTAGE CONDITION WITH SCRATCHES, SCUFFS, MARKS, OLD BLUE PAINT, ETC. THE SEATS ARE MADE OF OAK. ONE SEAT HAS ... moreA CRACK FROM SIDE TO SIDE THAT HAS BEEN REPAIRED WITH WOOD GLUE. ONE BRACKET HAS A ROD THROUGH IT THE OTHER DOES NOT. DOES NOT COME WITH THE WALL MOUNTS. COMES ONLY WITH WHAT YOU SEE. PLEASE ASK IF YOU HAVE ANY QUESTIONS THANK YOU!
Buy It Now
$122.85 Shipping Condition: Unspecified Location: Lawrenceburg, United States Antique Vtg Industrial Factory Cast Iron Swing Arm Wall Mounted Stool Wood Seat. Great original cast iron industrial stool that would have come off a ... morework bench. SizeIn photos
Buy It Now
$59.99 Shipping Condition: Used Location: United States Vtg Industrial METAL Drafting StoolBevco Shows wear- wood has scratches, chips, etcSize in photos Metal shows wearCool piece for your shop/ homeSelling ... moreas parts and repair only Sold as is no returns I will try and take apart for safe shipping
Buy It Now
$90.00 Shipping Condition: Used Location: Berkeley, United States You're looking at a pair of swing out factory bench seats dating to approx the 1920s. They possess their original wood (maple?). seats and the cast iron ... moreshows no breaks or repairs.
Buy It Now
$50.27 Shipping Condition: Used Location: Chicago, United States AntiqueIndustrial Factory Steel & Wood Stool. Seat is 14" round & composite wood. BACK is ADJUSTABLE ( Back also REMOVABLE). Height of seat is 21". See ... moreALL pictures. ( all sizes APPROX.).
Buy It Now
$185.46 Shipping Condition: Used Location: Sellersville, United States Antique Industrial quality with solid Cast Iron hardware & heavy duty threaded center rod. Marked on bottom BELL SYSTEM.
Buy It Now
$106.37 Shipping Condition: Used Location: Medford, United States Has some sun fade on the seat. Seat has some age. Please look at pictures carefully before purchasing. Check out my other listings. I have others like ... morethis posted. Thank you for looking, have a great day.
Buy It Now
$18.00 Shipping Condition: For parts or not working Location: Biglerville, United States Antique Cast Iron Stove Base? Foot stool? RePurpose as a plant stand? Other unique base RePurpose. Antique item shows signs of use scuffs scratches chips ... morerust and paint is tarnished in areas. See all pictures for details. Unknown manufacturer.
Buy It Now
$99.99 Shipping Condition: Used Location: Yuma, United States Pair of Mid Century Modern Frederick Weinberg style Hairpin Stool. Legs Raw, unpainted. Rusty industrial steampunk too.
Buy It Now
$123.80 Shipping Condition: Unspecified Location: San Martin, United States Antique Industrial Stool / Chair 18” Tall. Shipped with USPS Priority Mail.
Buy It Now
$34.49 Shipping Condition: Used Location: Valparaiso, United States Probably a Feick Brothers Co., Pittsburgh, Pa. Hospital Stool. This stool has very solid and sturdy legs. This chair has a wonderful sense of history ... moreto it. It is adjustable and adjusts very easily, as you raise the seat it does start to wobble a bit as shown which in my experience is pretty normal with stools that you spin to raise and lower.
Buy It Now
$59.99 Shipping Condition: Used Location: United States Vtg Industrial METAL Drafting StoolAjusto Shows wear- padding has wear, holes, scratches, etcSize in photos Cool piece for your shop/ homeSelling as parts ... moreand repair only Sold as is no returns
Buy It Now
$42.40 Shipping Condition: Used Location: Chicago, United States ClassicsIndustrial Factory Steel Stool. BACK & Seat ARE ADJUSTABLE ( Back also REMOVABLE). Seat is 14" round. Height of seat is 18 1/2" - 26 1/2". See ... moreALL pictures. ( all sizes APPROX.).
Buy It Now
$145.08 Shipping Condition: Used Location: Harrington, United States If this is a rare, unique, highly sought after, "HOT" item and you don't want to lose out, your best choice is toBuy It Now at the full price. The least ... morecostly is not always the first one up.
Buy It Now
$15.00 Shipping Condition: Used Location: Sandusky, United States Nice heavy duty swing out (swivel) seat for sale. Heavy cast iron If you have any questions please let me know thanks and good luck Also have a matching ... moreseat listed if your interested in two.
Buy It Now
$106.37 Shipping Condition: Used Location: Medford, United States Has some sun fade on the seat. Also has some rips in the seat etc. Please look at pictures carefully before purchasing. Check out my other listings. I ... morehave others like this posted. Thank you for looking, have a great day.
Buy It Now
$35.93 Shipping Condition: Used Location: Alameda, United States Weighs 16 lbs.
Buy It Now
$68.15 Shipping Condition: Used Location: Huntington Beach, United States Feature: Hideaway Under-the-table Swing Arm. Materials: Wood Seat and Cast Iron Arm. Quantity: A Set of Two (2) Seats. Arm Length: 16".
Buy It Now
$50.27 Shipping Condition: Used Location: Chicago, United States BACKS ARE ADJUSTABLE & REMOVABLE. Seat is 14" round. Height of seat is 27.5". ClassicsIndustrial Factory Steel Stool. See ALL pictures. ( all sizes APPROX.).
Buy It Now
$106.37 Shipping Condition: Used Location: Medford, United States Has some sun fade on the seat. Also has a rip on the side of the seat. Swivel seat. This chair does not have wheels Please look at pictures carefully ... morebefore purchasing. Check out my other listings. I have others like this posted. Thank you for looking, have a great day.
Buy It Now
$76.00 Shipping Condition: Used Location: Hesperia, United States Absolutely stunning industrial. Machine-age, shop stool. This steal seat is in pristine condition. No flaws or blemishes other than it's beautiful ... morepatina. I've sold other stools of the same fashion and none compare to this one. The legs and back are fully adjustable! Modifications are easily done with a screwdriver or small wrench. This fixture would look great in an uptown loft or any interior trying to accomplish the Industrial look. I am open to reasonable offers and am gladly picking up the shipping for your purchase. Anywhere in the contiguous USA. Please ask me any questions you may have before bidding. Thanks for the look! Stool measurements are as follows: Seat height: 24" Back height: 38" Seat Width: 14.5" Depth 15" GET IT BEFORE IT'S GONE!
Buy It Now
$78.20 Shipping Condition: Used Location: Belle, United States In used condition. Has scratches scuffs but just adds to its character. This is a used item so there may be small imperfections and or blemishes. Photos ... moreare of the actual item being sold.
Buy It Now
$32.59 Shipping Condition: Used Location: Chicago, United States BACKS ARE ADJUSTABLE & REMOVABLE. 14 lbs - Each. Footprint is 15" x 15". OVERALL Height is 37.5".
Buy It Now
$169.00 Shipping Condition: Used Location: Clinton, United States The seatback has a faded logo that appears to be the shape of a pig and there is a stamped logo on the back (shown) that I cannot identify. The seat height ... moreis 23" and the seat is 12" x 12".
Buy It Now
$25.00 Shipping Condition: Used Location: Syracuse, United States
Buy It Now
$42.85 Shipping Condition: Used Location: Reno, United States Here we have a really great low industrial stool with a built in storage bin. As you can see from the photos this stool is about 14 inches tall making ... moreit great for a low stool or foot rest. The storage bin in side would be great for magazines. Books, or tools. The diameter of the seat is about 14 inches. If you have any questions feel free to ask!
Buy It Now
Free Shipping Condition: Used Location: Plainview, United States toledo tall drafting chair in good condition
Buy It Now
Free Shipping Condition: Used Location: Wheaton, United States 24" h x seat is 14" dia and footprint is 20" across. Welds are solid with good hardboard seat. Has surface corrosion, and missing one foot cover.
Buy It Now
$39.00 Shipping Condition: Used Location: Akron, United States Vintage metal adjustable swivel stool. It is 24" - 33" tall, seat diameter is 13 1/2", frame is 14 1/8" by 14 1/8". Weighs 14 lbs 11 oz. Metal is aged. ... morePlease see pictures for details and condition.
Buy It Now
Condition: Unspecified Location: Canfield, United States Adjust 24” To 30” - 14” - 360 turn Round Seats. Both for one price.
|
|
|
|
Vintage Antique Signed Piano Stool Adjustable Industrial Machine Age Loft Decor
For your consideration is an absolutely beautiful piano stool in its original painted finish. This rare stool still bears the original paper label reading"BRIGGS PATENT PORTABLE STOOL- THE BEST FOR THE BEST PRICE IN THE MARKET- TRADE MARK- FACTORY PETERBOROUGH. N.H. The cast iron threaded seat support is embossed" J. BRIGGS PATENT PETERSBOROUGH N.H. PIANO STOOL WARRANTED OCT. 23,1866 DEC. 10, 1867" The stool is very solid and adjust in height from 19 1/2" 25" and has a 14" in diameter seat. The seat has been newly recovered with a supple piece of goatskin hide, tanned and finished in a tobbacco brown color. The stool being almost 150 years old does have some paint chips, scratches and wear, all adding to the item's wonderful character. The only minor flaw would be a chip in the seat collar at the top of the ... morecolumn(see photo#4) it can only be seen when the seat is removed but I just wanted to mention it. This is a very rare piece and as stated, just beautiful! Shipping quoted is to a street address in the lower 48 states. Thanks Please take a look at my other auctions. I usually offer a nice selection of industrial themed items, lighting and of course the unique!
|
|
|
Antique Cast Iron Industrial Adjustable Swing Arm Stool (wall or table mount)
I will start by saying that I aquired(2) of these industrial stool sometime back at a local sale that was selling some items that had be salvage from some old industrial plant. This auction is for one of these stools and the other is listed in a seperate auction. This is a large cast iron swing arm stool with what looks like a maple seat. This stool would have mounted either on the wall. A large table leg, or on a large piece of industrial equipement. It has a screw up adjustable seat and a swivel bracket on the swing arm so it could be positioned in several positions. The seat is 11" in diameter and 1 1/2" thick. The adjustable height of the seat is that it could be adjusted up to a height of at least(6) inches. The swing arm and wall or table mount bracket combined are(14) inches long. There is no damage to this item. It has a ... morefew specks of white paint on it and there is some minor rust specks here and there. The only thing I have done to this stool is clean the dust off and put a little wood cleaner on the seat to clean it up. Nice old hard to find industrial age swing arm stool that has a lot of uses. This item is being sold in as found condition with no reserve. International bidders please contact seller for shipping rates before bidding. International bidders welcome but mailing will be by priority international only. International bidders Pay Pal only. Please contact within 48 hours to confirm purchase and method of payment. Payment MUST be paid Within 5 days of sale end. We reserve the right to refuse selling to buyers who have numerous negative feedback or to someone that we have had problems with in the past.
|
|
|
EARLY ANTIQUE CAST IRON & WOOD STOOL BAR SODA FOUNTAIN BARBER INDUSTRIAL
THIS AUCTION IS FOR A GREAT OLD STOOL. THE STOOL IS 35" HIGH AND WEIGHS A LITTLE OVER 51 POUNDS. THE SEAT IS 15" ACROSS. THE BASE IS 17" ACROSS. THE BASE IS CAST IRON AND THE PEDESTAL IS WOODEN. THE PAINT HAS WORN OFF OF THE WOOD AND THERE ARE SEPARATIONS IN THE WOOD. THE BASE HAS SURFACE RUST AND THERE IS A CUT ON THE SEAT. THIS IS IN GOOD"AS-FOUND" CONDITION. BECAUSE OF THE SIZE IT IS FOR PICK UP ONLY. I CAN STORE FOR AS LONG AS YOU NEED.
|
|
|
Antique Cast Iron Swing Arm Cast Iron Stool Industrial Age Wall Table Mount
Nice old cast iron wall or table mount swing arm seat Arm swings approx. 90 degrees Bracket measures 5-1/2" x 5-1/2" extends out 6" If mounted would extend out approx. 24" to outside edge of wood seat(as shown in 7th photo) Mounting bracket on underside of seat measures 6" in diameter with 4 holes for mounting In excellent condition no chips or cracks Wood seat is not original but was custom made for it. The original seat was not with it when we found it Wood seat is Oak& measures 11-1/2" in diameter& 3/4" thick It is a heavy old piece weighing approx. 19 lbs. before packing Wood seat will be taken off for safe shipping Great old piece! Thanks for looking if you have any questions don't hesitate to ask!
|
|
|
Antique Cast Iron fold down Cast Iron Stool Industrial Age Wall Table Mount
Welcome to Grandpa's Garage.today you are bidding on a vintage WALL MOUNTED FOLD DOWN STOOL. You are bidding on a vintage wall mounted cast iron and wood. Spring loaded fold down stool. It is in very good condition, Seat measures 10" in diameter. The metal part is marked H& M and Pat apld for(pattent applied for) and CHGO. HDW. FDRY. CO I assusme that means Chicago Hardware foundry company. It also is marked NO. CHICAGO, ILL. This stool works great and folds to the up position when not in use. It's hard to get a picture in the down position as the spring is quite strong. I own(6) of these and the winner will have the option to buy up to six for the highest bid XXX 6. You are bidding on one in this auction. I am starting this one out at $99.99. Thanks for looking.
|
|
|
Antique Industrial Crank Stool (Works great)
Up for auction Antique Industrial Crank Stool(Works great) We ship FedEx ground. This auction is brought to you by TOPS selling office supplies and hard to find items in central Texas for over 10 years.
|
|
|
Antique Industrial Cast Iron Stool Repurposed Tractor Seat/Street Light Base
Antique Industrial Tractor Seat Stool The seat height on this stool is approximately 18" The cast iron base has a diameter of 13 1/2" Measurements: Height: 21 1/8" Width: 18 1/4" Depth: 16 1/2" Weight: 66 Lbs. Shipping Please contact us prior to bidding to obtain a shipping quote. We ship with USPS. FedEx& UPS Ground, Greyhound and sometime Freight to ensure that you receive the most economical shipping price. For efficiency in obtaining a quote please provide the Item Number you are interested in. Your zip code and if we are shipping to a business or residence. Please inquire before purchasing for shipping to AK. HI or International for this item. ~~~~~~~~~~~~~~~~~~ Due to the antique/vintage nature of these items please ask all questions prior to bidding. Please view other similar items listed in The Antiques ... moreWarehouse eBay Store. Thanks for Looking! If you have any questions about any of our listings please call Gary at 513 319 5405.
|
|
|
PAIR Antique Industrial Copper Stools - Ornate - Adjustable Chair - Medical
Available here is a phenomenal pair of antique stools. I am not sure what these stools are made of. But they are at least copper plated. The metal work on these are amazing, the pictures don't do justice to how ornate they are! The stools are fully functional and swivel up and down. There is a handle below the seat that adjusts the backrest. Moving it forward or back. The handle on the back adjusts the backrest up or down. The seat will swivel complete off the base. Both stools are in good condition and will support adult weight without issue. When swiveled higher, the seats do rock a bit. I've pictured the stools in a number of different positions, swivels higher and with the backrest adjusted. When these were purchased. They still had the original leather seats with horsehair padding. Unfortunately the seats were too torn up for ... moreuse and we've updated them. We retained the original wood base and have used black vinyl and foam padding. The seats can be attached to the stool with screws. One stool has black vinyl on the backrest. While the other is finished wood. We did not put the fabric on the backrest and have not tried to remove it. I could find no makers mark or anything else to identify these on the metalwork. One of the wood bases for the seats has a stamp on it. But I have not been able to make out what it says. I've included a picture of it. I am not sure what the original purpose of these were. One plausible guess was they were used in the medical field. Either for a doctor or dentist. When swiveled all the way way. The seats are approximately 18" from the floor. While the top backrest is approximately 30" from the floor. The seats are about 15" in diameter. If shipped. The seats will be removed from the base. Two boxes will most likely be needed. These can be stored in Kansas City for pickup for a reasonable amount of time, upon payment. I do accept offers and will consider any given. Feel free to contact me with any questions.
|
|
|
Antique Spring Stool Industrial Machine Adjustable Iron With Wood Seat
Excellent condition. 23"31 tall via spring lever. Wood seat(recently stripped. Stained& varnashed) is 10 1/2" wide. Reads on iron base: SMITH PGH, Pa. Pat Nov, 19, 1912. Great for kitchen, hobby, work, etc table. Fine working condition. Thanks for viewing. Pick up available, cash only Emerson, NJ 07630.
|
|
|
ANTIQUE INDUSTRIAL WOODEN WORK BENCH WITH WOODEN HANDLES
This vintage work bench has been beautifully restored while preserving the original antique patina of the wood. The top is solid maple with an oak front edge and back splash. It has been cleaned and sealed with matte lacquer. The drawers have solid oak front and pulls and all function very smoothly. They are all the same depth 5 3/4" inside but divided up as shown in the pictures. The black enamel sides and back have been cleaned and sealed with a clear lacquer finish as well. Dimensions: 35 in. H x 56 in. W x 26 in. D Call regarding item number L206773. We have easy and reasonable delivery to NYC and Washington D.C. We also deliver too many other areas in the mid-west including Texas. We ship a container to our L.A. location quarterly. So if you are not in a hurry you can save in shipping costs to California. Otherwise we have careful ... morecrating and packing services and will ship with a reputable commercial carrier. Please note. Our business registered in four states which mean that anyone having their items shipped or picked up in PA. CA. NY, or FL. will have to pay sales tax for that location. Our items are carefully salvaged antique materials and furnishings. So please bear in mind they WILL have imperfections. This is part of what adds to their character. 90% of our products are made in the U.S.A. in the 19th and 20th century. So the quality the craftsmanship as well as the wood or other materials used is outstanding. Most will need refinishing. Sandblasting, rewiring, etc. Unless it stated that they are already refurbished, refinished or rewired. We Do Not do cash refunds unless the item is damaged in shipping or truly not as described on ebay. Should you not be happy with your item. Or have a change in your design or building plans, we do have a generous store credit policy which is recognized in any of our NYC, CA, PA or Internet stores. Or you may personally inspect it at our National Headquarters: 570-341-7668 Powered by The free listing tool. List your items fast and easy and manage your active items
|
|
|
Vtg INDUSTRIAL MACHINE AGE STAIRS STOOL BENCH Warehouse Antique Iron STEP Ladder
Please study the photos- sold as found. Measures approx. 25 3/4" across by 19 1/4" tall by 18 1/2" deep. Weighs about 23 pounds. Local pick up welcome and encouraged. I can ship it via USPS. Questions- just ask. All items are very carefully packed. SELLING ON EBAY FOR OVER 15 YEARS WITH 100% POSITIVE FEEDBACK.
|
|
|
Antique Vtg. Cast Iron Legs Base Bench Stool Art Deco Industrial
Antique Vtg. Cast Iron Legs Base Bench Stool Art Deco Industrial Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Nice old cast iron bench/stool/table base Has an Art Deco look to the lines of it Measures just over 15-1/2" tall. 19-1/2" wide from outside of one leg to the other, base of legs measure 8" wide Has additional center mounting supports/brackets In nice condition no chips or cracks. Just some surface rust This piece does not come apart the center bar is attached to legs Thanks for looking if you have any questions don't hesitate to ask Combined shipping on items that can be safely shipped together. Payment expected in 4 days of winning the item. Please contact me if you need more time, otherwise ebay will automatically open an unpaid item case. DO NOT DUPLICATE ... moreOR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak.
|
|
|
Antique Industrial Piano Stool Steampunk Wood and Ornate Cast Iron Victorian
Up for auction is an Antique Industrial Stool. Made of wood and cast iron. It looks to be pre 1900, but I can't say for sure. It is in good condition and has the PERFECT patina. The center section is all wood and has 3 cast iron legs, the seat has the original wood. It looks like the seat cover has been professionally recovered, there are some cracks here and there, the bottom of the seat is separated at the factory seam- just needs clamped and glued. The cast iron is a bit rough and could be sand blasted to smooth it, but that is your preference. The seat is adjustable, one it is raised it gets a bit wobbly, but at the bottom it is nice and sturdy. It measures 19" at the lowest point and raises from there, the base of the feet is 15" wide, the seat is 13 3/4" wide. If you have any questions please ask. Thanks.
|
|
|
Antique Industrial Wood & Cast Iron Adjustable Swivel Drafting Stool
Antique Industrial Wood& Cast Iron Adjustable Swivel Drafting Stool Very good condition Seat approx. 14" Diameter Approx. 20" H with seat down Seat Swivels up approx. 12 to 13" Bottom of seat and cast iron has been painted black(see pics) Seat has been re-seated in newer holes. Do not know when(see pics) From family estate. Non-smoking& pet free home Thank You!
|
|
|
TOLEDO ANTIQUE STEAMPUNK DRAFTING METAL BAR STOOL INDUSTRIAL MACHINE
Really nice piece that will enhance any area it has missing paint and slight rust but will Clean up very nice. The seat looks to be glued and loose down the cracked half and and the bottom has a brace added to keep the wood together. This is an original piece and will clean up very nice. I would leave the seat and stain or just replace but I'll leave that to the owner. Fast free secure shipping Posted with
|
|
|
vintage Antique Industrial Toledo UHL Drafting drawing Stool NICE
Up for auction is. Super nice vintage Toledo UHL Drafting Stool. It is in great vintage condition. It has the original snap on padded green vinyl covers. Which have been protecting the wood underneath. The wood is in great shape, with no chips or cracks, just a few scratches and spots- see pictures. The base is in good shape as well, with just a little surface rust here and there. All functions work great, the seat adjusts from 23" to 31" all the feet are original and move freely, the back adjusts as well. The seat measures 16" wide x 14" deep, the back is 14" wide x 6 1/2" high. The foot rest is 16" diameter. Part of the original label sticker is still intact on bottom of stool. The original covers are in nice shape as well, they snap on and off easily. There is one small less than 1" rip on seat and ... moresome off the stitching on back is starting to come loose. All in all an excellent example of a vintage Toledo Drafting Stool. If you have any questions please ask. Thanks. Posted with
|
|
|
ANTIQUE STEAMPUNK METAL STOOL INDUSTRIAL MACHINE AGE-Loft
ANTIQUE STEAMPUNK METAL STOOL INDUSTRIAL MACHINE AGE-Loft. Rusty tried to show in pictures. Old-if you have questions. Message me. See pics for size. Most of my items are from estate auctions—there will be imperfections and might need cleaning—but I always try to show the flaws in the pictures. I can’t always guarantee that I will find all of the flaws. Please inspect each of the numerous pictures. If you are concerned with the condition of the item—please message me and I will check for you. Thank you for looking!
|
|
|
Vintage Industrial Antique Woodworkers Workbench Kitchen Island 7' Table 1910s
You're looking at an antique industrial woodworker's bench with gorgeous age. Manufactured by Hammacher Schlemmer& Co. of New York. The original vise works well and the wooden threaded rod is in great shape. The base cabinet contains an open storage section and a drawer; both of which are in good shape other than some cosmetic flaws like paint splatters. Scratches etc. The top is removable from the base for easier transportation. Toledo chair is sold separately) Measures approx: L 84" x W 24" x H 32.5" Pick up is available from Brooklyn. NY. I will also work with your preferred shipping company if your desire is to have this item shipped. Please check out my other Industrial/ Mid-Century listings. Happy bidding!
|
|
|
REMARKABLE 130 YEAR OLD ANTIQUE INDUSTRIAL WOODWORKERS BENCH
HERE IS A REMARKABLE 130 YEAR OLD INDUSTRIAL WOODWORKERS BENCH. IT HAS 2 WOOD VICES AND IS IN EXCELLENT CONDITION. THE REMOVABLE TOP RESTS ON A HEAVY WOOD FRAME WITH A LOWER STORAGE SHELF. THIS IS AN EXCELLENT ADDITION TO A KITCHEN FROM ANTIQUE TO MID CENTURY MODERN. IT MEASURES 85" LONG. 25.5" DEEP, 35" TALL. THE LOWER SHELF MEASURES 45" LONG, 23" DEEP, 18" HIGH. WEIGHT IS APPROX. 120LB. IT IS TRULY A CONVERSATION PIECE. WE WILL SHIP. CONTACT PLYCON, CRATERS AND FREIGHTERS, TSC MOVING, USHIP FOR A QUOTE.
|
|
|
Antique Industrial Wood & Cast Iron, Leather , Steampunk, Swivel Drafting Stool
2014-04-30 328 UBER RARE. ONE OF A KIND, CAST IRON INDUSTRIAL, STEAMPUNK BAR, PARLOR, DRAFTING, STOOL, LEATHER TOP SEAT. DO NOT MISS YOUR CHANCE TO HAVE THIS PERFECT ADDITION TO ANY COLLECTOR OF THIS ERA ARTFORM 30"TO 34" TALL
|
|
|
Antique Vintage BLACK Industrial Wood Cast Iron STEAMPUNK Swivel Drafting Stool
Antique Vintage BLACK Industrial Wood& Cast Iron STEAMPUNK Swivel Drafting Stool Condition: Great( SEE PHOTOS FOR MORE ON CONDITION) Wear On Bottom Of Legs Very rare all original Adjustable- Engraved Brass Number Plate On Corner Of Chair Reading S58 28" Tall- Chair 14" All Around LOCAL PICK-UP ONLY- HOLLYWOOD. CA dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-146f6c1bba4-0x108-
|
|
|
Antique Industrial RailRoad Trolley Iron Swing Arm Stool with Oak Seat
INDUSTRIAL SWING STOOL WITH OAK SEAT ~ ~ IT'S THE LARGER VERSION ~ 20" ARM/ 12" D SEAT ~ THESE WERE USED IN RAILROAD TROLLEY CARS ELEVATORS AND IN FACTORIES ~ THIS IS A NICE ONE!
|
|
|
Vintage Industrial Cast Iron Base Swivel Stool Stand Fixture Antique Steampunk
This beautiful wooden stool is attached to a swing arm on a heavy cast iron base that includes an adjustable stool and foot bar height. It is meant to be bolted into a floor and would be an excellent addition to any workshop. Studio or even a bar. The stool measures 14 1/4" in diameter, is attached to a 12" long swing bar and sits between 20" and 29" off the ground. The base is 8" in diameter and stands 21 1/2" tall. The foot bar measures 15" long and has varying heights between 8" and 12" This is a vintage item that is worn but in great condition for its age as pictured. Bulbs are not included unless specified I also have a wonderful selection of other industrial artifacts. Please feel free to browse! Please give me a call with any questions you may have 815-299-7625 Happy bidding PLEASE READ ... moreTHE FOLLOWING VERY CAREFULLY There is a $10.00 handling charge on all international orders. We can accept NO RETURNS. REFUNDS, ETC. ON INTERNATIONAL ORDERS. We are in no way responsible for damages that may occur during transit. International orders should expect to have an additional 3-5 day handling time. BUYERS ARE RESPONSIBLE FOR ANY DUTIES AND TAXES THAT MAY APPLY. SHIPPING PRICES REFLECT THE FACT THAT ALL OF OUR ITEMS ARE INSURED FOR THEIR VALUE. SHIPPING COSTS ARE AN ESTIMATED REPRESENTATION; ACTUAL COSTS MAY VARY BASED ON ITEM AND DESTINATION. You are welcome to pick up your items with an appointment with no additional charges. Skidding charges will still apply. NO PAYPAL FOR WILL CALLED ITEMS INTERNATIONAL CUSTOMERS: Items shipped to some countries cannot always be insured for their full value. In these cases. We will insure them to the full extent available, but will not be responsible for additional damages above the available insured amount. International items are shipped via USPS; please become familiar with the insurance policy associated with your country. All packages will be shipped out on the first Tuesday or Friday following payment All items are described to
|
|
|
industrial bench stool metal cool vintage antique
industrial bench stool metal cool vintage antique shows some use has some rust Measurments 16w x 42h x 16d 15" seat 12" back rest 17" base Key words- Industrial. Chic. Steampunk. Retro Recycled. Re purpose Antique Vintage Old. Industrial Age. Metal. Unique Cool. Awesome. One of a kind.
|
|
|
ANTIQUE INDUSTRIAL STEAMPUNK SWIVEL STOOL- READY TO USE- STURDY
THIS OLDIE JUST HAS"THE LOOK" SUPER INTERESTING HOW THE PAINT HAS WORN DOWN TO WOOD- BEAUTIFUL. THIS IS NOT ONLY A GREAT AESTHETIC PIECE BUT- READY TO USE- FULLY FUNCTIONAL AND VERY. VERY STURDY. THIS NEAT STOOL WOULD BE GREAT ANYWHERE AND IS SUPER COMFORTABLE TO SIT IN AND IT SWIVELS. IT HAS THE THICKEST WOOD YOU HAVE EVER SEEN ON THE SEAT AND THE BACK. THIS ONE IS GOING TO BE AROUND A LONG WHILE. MEASURING 29 1/2" TALL X 14" SIDE TO SIDE X 14 1/2" DEEP. IF YOU HAVE A GREYHOUND STATION NEAR YOU- I CAN SHIP THIS FOR 28.00- FEEL FREE TO CONTACT ME WITH YOUR SPECIFIC ZIP CODE AND I WILL GET OTHER QUOTES AND OPTIONS FOR YOU. THANK YOU-
|
|
|
Antique Hand Made Natural Oak Wood Industrial Bench Bar Stool with Foot Ring
Normal 0 false false false EN-US JA X-NONE This is a really great example of beautifully hand-crafted furniture. The attractive curved 4-leg configuration is very stable and still in excellent shape. It was obviously designed to stand up to a heavy workload. But the stool has seen its share of use over the years. There are small saw marks in a couple places on the seat edge. The seat has apparently come loose at some time in the past and been reattached with L-brackets. Although this may not be original, it is very sturdy. The foot ring does have a split in it. These things can be observed in the photos. The chair could be restored by a skilled woodworker. Approximately 28” tall x 15” square. Please examine the photos closely and email any questions. Item#14.395
|
|
|
Antique Industrial Metal Stool with Cast Iron Feet & Wood Veneer Seat STEAMPUNK
Antique Industrial Metal Stool with Cast Iron Feet& Wood Veneer Seat STEAMPUNK Good vintage condition with excellent patina. Has surface rust and heavy wear to the wood veneer top. Very solid and sturdy. 19" tall Seat top is 12" in diameter.
|
|
 |