|
Vintage Brass Claw & Ball Furniture Feet -Set of 4 -4" Tall & 3/4" Opening
This is a set of 4 super nice salvaged Ball& Claw feet. They are 4" tall with little wear& good detail& have a 3/4" opening at top.
|
|
|
Antique Set Columns Pediment Furniture Column Parts Architectural Salvage
Up for auction is a vintage lot of furniture parts. Either walnut or mahogany. One of the larger pieces is missing one of its pegs. The larger pieces measure 13.75" wide, 4.25" tall and the pegs are 11" apart. The smaller columns measure 7.75" tall. Each piece has a bit of wear and the pegs on the larger piece that are remaining have been reglued back in. Super FAST SHIPPING! Questions always welcome, thanks for looking! Terms& Conditions*Please note that USPS rates just increased in January 2013. This is beyond my control but be assured that I always pack with care. Packed as I would want them packed if I had won the item. A positive buyer experience is very important to me, please contact me before leaving any negative feedback so we can resolve any issues that may occur. I am not an expert on antiques and try to ... moredescribe each item to the best of my ability using completed listings on eBay and reference books. Please contact me if I misrepresent an item and I will fix the problem immediately. Combined shipping discounts are available on items won within a 7 day period, contact me if you need an exact quote. I would appreciate payment being made within 4 days but will understand if you need more time, just let me know. Lastly, as required by law, all Pennsylvania buyers will have a 6% sales tax added on at checkout. International Shipping If you are blocked from bidding due to your location. Please contact me for a quote and I will determine whether or not I can ship the item to you based on your eBay feedback and the item. If an auction is less than 24 hours from ending, I cannot guarantee that I will get back to you in time so please contact me as soon as possible. Posted with
|
|
|
2 Vintage BRASS CAMEO FURNITURE DECALS
Up for bid is 2 Vintage BRASS CAMEO FURNITURE DECALS They are 2" round and have a screw on the back to put in on your piece of furniture. There is on# stamp on the back 10638. It has it original patina. I try to describe items as accurately as possible. All items are used(unless specified) and are therefore sold AS IS- WHERE IS. If you should have any questions on my auction. Please E-mail me and I will respond promptly. Buyer pays shipping cost and handling. Check must clear before shipping. When PayPal is used, payment is expected within 3 days after close of auction. Michigan residents pay 6% sales tax.
|
|
|
Vintage 1900s Racine Piano Stool w/Metal Claw Feet Holding Glass Balls
You are bidding on a Vintage Piano Stool. Made by Racine Stool Mfg. It has metal claw feet holding glass balls. It measures 14" in Diameter. It is in good original condition. It has its original finish. I believe it was made in the early 1900s. The center screw mechanism to raise and lower the stool is in good operating condition. Nice addition to any piano or just a nice accent piece. If you have any questions. Please ask before you bid. I ship UPS Ground. When possible. I will combine items for shipping. Thank you for looking. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-140431bb2d1-0xfb-
|
|
|
17 BUTTON, DOME, CHEESE HEAD? WOOD SCREWS 1.25X#12
FOR AUCTION IS 17 BUTTON. DOME, CHEESE HEAD SCREWS? I'M NOT SURE WHAT THE SCREWS ARE, OR THEIR APPLICATION. I HAVE WORKED WITH ALL STYLES, NEVER SEEN THIS TYPE. I SPENT 2 HOURS ON COMPUTER TRYING TO FIND THEM, NOTHING. IF ONE IS IN NEED OF THIS STYLE THEY ARE HERE. IF ANYONE KNOWS. PLEASE LET ME KNOW. THANKS
|
|
|
PAIR OF ANTIQUE PIERCE CARVED OLD OAK PEDIMENT WALL PANEL GARNISHMENTS
PAIR OF ANTIQUE PIERCE CARVED OLD OAK PEDIMENT WALL PANEL GARNISHMENTS This is a very nice and unusual pair of garnishing pediments for walls. Scones, or just use your imagination. As many practical uses. These pieces are very unusual, solid oak, highly carved. In very good condition. Please see photos. H 19 1/4in x W 5 1/2in x D 3/4in TERMS OF SALE(OL-DALAL) is a FAIR& BETTER BUSINESS ZONE Integrity is#1& I appreciate your consideration. Feel comfortable with your purchase. If you are blocked or having problems bidding or buying. Please notify me to activate. PAYMENT Paypal only please. Must pay for previous sold items before bidding on another item. SINGLE ITEM: Payment is due within 3 days of sale closing. MULTIPLE ITEMS: Payment is due within 3 days of final items’ sale closing. Must be notified of the items if planning to combine ... moreshippments) SHIPPING Shipping. Insurance& Handling is included with the flat rate shipping. Handling must be included with calculated& international shippment. Insurance option at customers risk-Please get insurance. Don't take the chance) Monday-Friday daily shipment if paid the day before. In most cases. No Saturday. Sunday or Post Office Observed Holiday shipments. COMBINED SHIPPING: All items are package& put in a box immediately after photos. Reason. To prevent damage& for international shipping quotes. We can only add all small boxes to 1 box for a fee. Please contact for combined shipping quote. Include items of interest and your zip code. FEEDBACK: Time and effort have been taken to accurately portray and/or describe all items for sale. If any problems. Please notify me for worry free resolution. Feel comfortable with your purchase. So please RETURNS: All items returned must be in the same condition as received(unless damaged in shipping) Please check photos. Items are packaged after photos. Please add insurance in case of damage or lost. Please return original package or pack carefully. Any question. Please ask
|
|
|
Rare bronze French Louis XV XVI garland curtain furniture part 23 cm x 17 cm
Photos speaks for themselves Rare old French Louis XV/ XVI garland/ curtain bronze furniture part 23 cm x 17 cm approx. Very good conditions I accept Paypal FREE SHIPPING WORLDWIDE!
|
|
|
LOT OF 5 Vintage Finials - Drapery Finial - Turned Finial - Furniture Pediment
This auction is for a LOT OF 5 wood finials. One set of(2) large curtain/drapery tieback finials with a dark stain and gold gilt- this set is very ornate and dramatic(please see photos) One set of(2) artichoke/pineapple finals with a solid brown lacquered finish- this set is the most traditional. One(single) finial/furniture pediment fashioned as a dimensional four-sided fleur de lis with a faux stone finish and gold gilt. All 5 finials are in nice condition with limited signs of age and wear and no missing pieces or fractures. The lot of 5 are priced to sell and shipping has been priced at cost according to weight and proper packaging. Please contact seller prior to the end of auction with any questions. Thank You!
|
|
|
Antique wood drawer 17x15x3.5 inches inside, 18 inch front, needs cleaning as is
Antique wood drawer 17x15x3.5 inches inside. 18 inch front, needs cleaning sold as is for parts or restoration. thanks
|
|
|
ANTIQUE DECORATIVE BLOND OAK TOP TO A BED
Verynice antique bed top in light oak with added decorative sections. Top has one thumbnail size priece missing as noted in picture 3 and the decorative end on picture 5 has been repaired and reqlued. Other than wear and age. No other problems are noted. The top is pictured on a king size to indicate size. Length is 5 ft. x 11" wide at top x 1 1/4" thick and weighxs 10 lbs. Buyer to pay S/H. Will ship UPS so cannot accept a box number address.
|
|
|
4 NOS Vintage Furniture Legs Unfinished
This auction is for 4 NOS Vintage Furniture Legs Unfinished. The legs are about 16 1/2" H. If you want additional information or pictures please email. We do not accept offers on any items. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1404b13589b-0xfb-
|
|
|
Lot of 11 Vintage Furniture Hardware Bails
This is an auction for a Lot of 11 Vintage Furniture Hardware Bails. The bails range in size from 3 3/4" to 3 1/2" L( overall) If you want additional information or pictures please email. We do not accept offers on any it
|
|
|
Lot of 4 NOS Vintage 1 1/2" Wheels Casters 3/4" Shank
This auction is for a Lot of 4 NOS Vintage 1 1/2" Wheels Casters. The shank is 3/4" L. The wheels are plastic. If you want additional information or pictures please email. We do not accept offers on any items. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-1404b13582f-0xf1-
|
|
|
ANTIQUE MEDALIST DRAWER PULL KNOBS
LOT OF 3 VINTAGE DOOR PULLS 2 ARE METAL PAINTED WHITE. ONE IS PORCELAIN MADE IN JAPAN.
|
|
|
Assorted Castor Cups Furniture Hardware Misc Lot
Lot of 10 Castor Cups of Various Sizes& a couple of misc pieces. Large ones measure appx. 1.5" Inside Diameter X 1.5" in height. The small is appx. 1" id) X 1" height) Thank You!
|
|
|
Set / 3 ANTIQUE BRASS DUNCAN PHYFE LION PAW CAPS
UP FOR YOUR CONSIDERATION THIS LOT OF 3 BRASS PATINA DUNCAN PHYFE SIDE TABLE LION PAW CAPS. MEASUREMENTS 2 1/2" L X 1 3/4" W X 1 1/2" H. EXCELLENT CONDITION AND WONDERFUL PATINA. PLEASE FEEL FREE WITH ANY QUESTIONS BY EMAIL.
|
|
|
3 Carved Walnut Curved French Table Legs
2-18-13 This is a set of 3 curved French table legs. They are nicely carved. The finish is original. They acame off a 3 legged table. Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Antique Mahogany 3 Legged Table Column base Early Dovetailed
2-20-13(10) This is a solid antique mahogany table base. It is tight and in good condition. The finish is good. The legs are dovetailed to the column. This is an antique hand made base. 17.5" High X 17.5" Wide X 15" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Pair of 23" Hand Painted Moldings Table Skirts
2-20-13(25) This is a pair of hand painted molding/skirts. They were part of a table. They are solid mahogany and are in good condition. 4" High X 23" Wide X 6" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4 Matching Mahogany Antique Bed Post Feet
2-20-13(17) This is 4 matching mahogany bottom of a poster bed. They are in original finish. They were cut off of posts from a bed. 9" High X 3.25" Wide X 3.25" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Pair 35" Matching Decorated Painted Wood Table Skirts Moldings
2-20-13(24) This is a pair of mahogany painted table skirts. They are hand painted. They are in good condition. 4" High X 35" Wide X 6" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1404b1358bd-0x105-
|
|
|
5 Matching Brass Looking Metal Fluted Legs
2-20-13(30) This is a set of 5 metal legs with a brass finish. They are all in very good condition. 9.5" High X 2.5" Wide Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Paint Decorated Leaves & Flowers on Panel Board
2-20-13(13) This is a nicely painted panel. The paint is in good condition. It is on a lamanated board. This came off of a coffee table. Some of the lamanation is loose on the back. 20.5" High X 32" Wide X 1/8" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Pair of 17.75" Mahogany Scalloped & Carved Table Skirts Molding
2-20-13(17) This is a pair of solid mahogany table skirts. They are in original finish. These match a longer pair being sold separately. 3.75" High X 17.75" Wide X 1" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Pair 34" Mahogany Carved Scalloped Molding Table Skirts
2-20-13(22) This is a pair of mahogany table skirts. They are nicely carved. They are in original finish. These match a shorter pair being sold separately. 4" High X 34" Wide X 1" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Antique 47" Mahogany Fluted Carved Column Support
2-18-13 This is an antique mahogany column. It is fluted and is feather carved. It has a nice carved top. It is in original finish. It is in very good condition. Near the top is an age crack. Not serious and hard to see. 47" High X 5" Wide Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Hanging Antique Fretwork Hanging Wall Pocket Shelf Portrait
2-18-13 This is a neat hanging wall pocket shelf. It is in good condition. The finish is original. There is a man's portrait glued in. I think it is paper but could be ceullode or ivory. There are some pieces missing of the front. 18" High X 19.25" Wide X 7" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2 Odd Walnut Fluted & Twisted Column Supports
2-18-13 This is 2 odd walnut columns. One is fluted and the other is twisted. They are partially flat on the back. They are both in original finish. One is 28" long and the twisted column is 36" long. Some chips missing. Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
8 pc Vintage Used Porcelain & Metal Casters Wheels more than 1 1/2" casters
Casters are in good condition. No cracks the stens are all the same except for 2. The stems are rusty. Can be removed. The porcelain in some spots needs to be cleaned.
|
|
|
Antique Cast Iron Adjustable Chair, Table Base Kenney Bros Mfg Boston Industrial
offered is a"Antique Cast Iron Adjustable Chair. Table Base Kenney Bros Mfg Boston Industrial" very good pre-owned used condition. An adjustable antique cast iron chair or table base from the early 1900's in great condition. Manufactured by the Kenney Brothers& Wolkins Co. of Boston. It is 9" across the bottom. 7" short when retracted, 12" tall when fully extended and weighs about 8 lbs. the top support measures 6 5/8" across left to right x 5" deep at deepest point. sold as is. As pictured, final sale condition. please see the many detailed pictures for description.and ask any questions before bidding.thanks PLEASE NOTE: shipping is usps parcel post mail and includes delivery confirmation please contact me if unhappy for any reason so that i can resolve any problem and earn your 5-star rating.thanks! ... morePosted with
|
|
|
Art Nouveau Art & Crafts Brass Decor for Furniture,Fabric Lamp Shade - 2.5 x 3 "
ART NOUVEAU ART& CRAFTS ORNATE BRASS DECOR FOR FURNITURE. FABRIC LAMP SHADE AND MANY MORE. THIS ITEM IS IN GOOD CONDITION WITH ORIGINAL PATINA. Measurements(approximate) Toll: 2.5 in Wide: 3 in Weight: 0.02 lbs Please. Read our policies: To be as accurate as possible we provide enough photographs to allow the buyer to make their own judgments. Any defects not mentioned in the description but visible in the photographs will be considered as described. There may be possible minor professional restoration. Although every effort is made to ensure accurate dimensions and weights the items show will always be treated as approximate. Please note: we can only ship item to your registered pay pal address, the one that accompanies your pay pal payment. Seller accepts no responsibility for shipping errors to incorrect shipping addresses, customs ... moredelays, or customs charges(please, check with your country's customs office to determine what these additional costs will be prior to bidding/buying) Buyers are responsible for any destination charges, customs duties, or inspection fees(please make sure that items purchased are legal for import into your country) We are happy to combine shipping for multiple items. PLEASE CONTACT US WITH ANY QUESTIONS OR OFFERS. Thank you for viewing our item.
|
|
|
Art & Crafts ornate Brass Decor for Furniture,Fabric Shade & Slag glass - 6x7 "
Art NOUVEAU ART& CRAFTS ORNATE BRASS DECOR FOR FURNITURE. FABRIC LAMP SHADE, SLAG GLASS AND MANY MORE. THIS ITEM IS IN GOOD CONDITION WITH ORIGINAL PATINA. Measurements(approximate) Toll: 6 in Wide: 7 in Weight: 0.04 lbs Please. Read our policies: To be as accurate as possible we provide enough photographs to allow the buyer to make their own judgments. Any defects not mentioned in the description but visible in the photographs will be considered as described. There may be possible minor professional restoration. Although every effort is made to ensure accurate dimensions and weights the items show will always be treated as approximate. Please note: we can only ship item to your registered pay pal address, the one that accompanies your pay pal payment. Seller accepts no responsibility for shipping errors to incorrect shipping addresses, ... morecustoms delays, or customs charges(please, check with your country's customs office to determine what these additional costs will be prior to bidding/buying) Buyers are responsible for any destination charges, customs duties, or inspection fees(please make sure that items purchased are legal for import into your country) We are happy to combine shipping for multiple items. PLEASE CONTACT US WITH ANY QUESTIONS OR OFFERS. Thank you for viewing our item.
|
|
|
Vintage Furniture Wood Salvage Spindle and bun feet splits for decorative use
First picture is of actual pieces available in this listing. Others are example of how they are applied to leg or column. Pieces can also be used as split finial decorative touches to furniture or walls. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-1404b135905-0x108-
|
|
|
SET OF 4 VINTAGE RETRO SWIVEL CASTERS WHEELS TABLE CHAIR
SET OF 4 VINTAGE CASTERS. Brass and hard plastic wheels, 1 1/4 inch wheels, brass frames ball bearing swivel. mounting plates are 1 3/4 x 1 1/4 inches, good lightly used condition,
|
|
|
3 Vintage Penneys Penncraft Table Drop Leaf Support Replacement Part Brackets
Auction is for 3 old Penncraft drop leaf supports for tables. Let me know if you need more info. Selling AS IS Buyer pays shipping Shipping only inside the USA Thanks Posted with Posted with
|
|
|
Antique Victorian Heavily Carved Lion Head Crown Board 48 1/2" O Fin Qtrsn Oak
Up for auction is a beautiful antique Victorian heavily carved crown board. The piece is in original finish. Quartersawn oak. A lion head is at the center of the carving. It is 48 1/2" wide, 13 1/2" tall at the highest area, and 2" thick at the top. There are a couple of small paint spots. There is a missing piece of carving above the head. This is a beautiful piece, and is being sold in as found condition at a reasonable reserve. This will be shippped by Fed Ex Ground. I believe it will be too large for Parcel post shipping. For an exact shipping quote, please email with your zipcode. The shipping calculator is only a suggestion, so please wait until you receive an invoice from us for the actual payment due. Please ask questions before bidding. In all fairness to us and other bidders, the winning bid is a contract. The winning ... morebidder is expected to complete the transaction by making payment. If the buyer feels an item has been misrepresented. We ask that the he/she notify us within 3 days after receipt. We will work with you on resolving the problem. We ask that potential buyers ask any pertinent questions, as their level of expertise might bring to light condition issues that we might not be aware of. Unless your item has a fixed shipping fee. Please wait to make payment until you have received an invoice. Invoices will be sent within 48 ours of the end of the auction. International bidders: Before bidding. Please email for a shipping quote. Due to availability of protection for the bid price of our buyer, and paypal protection for the payment transaction, priority mail international is the method we use for international shipping. Shipping costs are quite expensive. And we want you to be advised before making your bid. Please don't ask us to mark this as a gift, or change the item value. Terms: Shipping costs include a small handling fee and insurance. Shipping costs are not refunded. Shipping is generally done on Thursday and Friday. Fed Ex packages are dropped off at a Fed Ex Store about 2
|
|
|
ANTIQUE VICTORIAN BED DRESSER CABINET WHEEL ROLLER CASTER PORCELAIN AND IRON
HELLO, THIS AUCTION IS FOR AN ANTIQUE CASTOR. ITS MADE OF IRON AND THE WHEEL IS PORCELAIN. WHERE THE PORCELAIN WHEEL IS ATTACHED TO THE IRON AXLE. THERE IS SOME CHIPPING OF THE PORCELAIN AROUND THE HOLE WHERE THE AXLE GOES THROUGH. I HAVE TAKEN A PHOTO OF THIS. IT DOESNT EFFECT THE WORKING USE OF THE CASTER. IT WOULDNT REALLY BE NOTICED UNLESS SOMEONE WAS DOING A THROUGH INSPECTION. ANY QUESTIONS PLEASE BE SURE TO ASK BEFORE BIDDING. THANK YOU.
|
|
|
❀ANTIQUE 1800's MEDIEVAL STYLE WOOD FURNITURE PEDIMENT HEAD OF MAN
FABULOUS ANTIQUE FURNITURE PEDIMENT/ DECORATION. MEDIEVAL-STYLE WOOD CARVING WITH GREAT PATINA. 3D HEAD WITH FEATHERED HAT. WEIGHS 2LBS. THE ROUND PLAQUE IS 8.5" LONG. FOR SPECIFIC MEASUREMENTS. SEE THE PHOTOS TAKEN WITH A RULER. FRANCE C MID TO LATE 1800'S Check out my! Be sure to add me to your! NO RETURNS. I WILL GLADLY COMBINE THE SHIPPING OF MULTIPLE ITEMS. On Nov-16-12 at 13:56:41 PST. Seller added the following information:
|
|
|
Great Paw Feet for Round Oak Table set of 4
GREAT SET OF OAK PAW FEET FOR A ROUND OAK TABLE IN ORIGINAL AS FOUND CONDITION. THEY ARE 17" L X 7" H AND MEASURE 5" WIDE ACROSS THE PAWS. ONE PIECE NEEDS REGLUED.
|
|
|
Outstanding 1880's Brownstone Highly Carved Mantel Top 24.25" Deep
Up for bid is a very sweet highly carved mantel Shelf.however this thing is 24.25" deep so know it could now server another 130+ years as a Bar. A Kitchen bar top, etc. I am told that it came out of the 3rd floor of a Philadelphia Brownstone. There are many forged nails in this mantel shelf helping validate the age of this piece as 1880's period. The carvings on this mantel shelf are beautiful and without loss. The wood appears to be painted Quartersawn Oak, however top is of a different wood species and should tell us this thing was always painted. If you are looking a piece of art from the 19th century.look no further. this piece is 62.25" long x 24.25" deep and 12" tall. Pick-up of this item is in zip 21921, or I can make available for your shipper. Please see our other wonderful architectural and Victorian items.
|
|
|
2 GORGEOUS Vtg Fancy Silver Brass Ice Box Trunk Hinge Steampunk Hardware Lot
Set of 2 mat ching vintage beautiful fancy cast brass polished silver color hinges. Not sure what they came off of, possibly an old ice box or trunk. They're in good vintage condition with some surface wear and tarnish. They measure approximately 5 3/4" long x 2 1/8" tall. P lease take a look at pictures for any further description/condition =) I have a huge assortment of vintage hardware from my collection.so don't forget to take a look at my other items I have listed =) Sorry. No international shipping. Tax will be charged to all California residents. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-1404b51c33e-0xfd-
|
|
|
80+ - VINTAGE STEEL-WOOD-PLASTIC CASTERS
JUST AS SHOWN AND NEED A GOOD CLEANING. APPROX. 80+(I THREW IN A FEW EXTRA NOT IN PICTURE THAT I CAME ACROSS AFTERWARDS) VARIOUS CASTERS. GREAT FOR A ANTIQUE SHOP THAT NEEDS REPLACEMENTS ETC. THANKS FOR LOOKING.
|
|
|
ONE PC ANTIQUE VINTAGE METAL CLAW FOOT TABLE LEG CAP
ONE PIECE METAL CLAW FOOT TYPE TABLE LEG. 3/4" INSIDE WIDTH. SEE PICTURES
|
|
|
ONE PIECE DRAWER PULL STEEL SCALLOPED TYPE
ONE PIECE SCALLOPED METAL DRAWER PULL. 4" WIDE. NO SCREWS. SEE PICTURES
|
|
|
3 OLD SOLID WOOD FINIALS * 3 5/8" DIAMETER * OFF ROUND LAMINATED
THESE COULD BE HAND MADE SINCE THERE IS SLIGHT VARIATION IN SIZES BETWEEN 3 1/2" 3 5/8" DIAMETER* POSSIBLY MAPLE. THE THREE WEIGH IN AT JUST OVER 2 1/2" POUNDS* PLEASE REFER TO PHOTOS FOR CONDITION* CENTER DOWEL IS REPLACED. SHIPS FLAT RATE PRIORITY*
|
|
|
Vintage turned table legs. A set of 4 wooden legs ready to work with. Great cond
Beautiful selection of vintage turned table legs ready to be put to use or made into another furniture piece. I asked my husband what type of wood this was and he said that it might be poplar. It is not pine and it is not a heavy oak. Take a look at the pictures and let me know what you think. All of the legs are in great condition and as you can see. There are a lot of pieces to work with. The pieces are straight cut and ready to glue or be redesigned. The legs are all the same size measuring 16 3/4' long x 3 1/2' at the largest diameter. Thank you for looking!
|
|
|
Pair Vintage Industrial Cast Iron Cafe Tables Bases/Legs/Pedestals
You are buying a pair of table bases ONLY. I have tops for them but the tops are only available if you pick the item up here. No shipping of the tops. Bases are cast iron for the bottom base and that base is 16 1/2" toe to toe-22" end to end. The center post is tubular steel and the upper mounting plate is steel and 11" diameter. Base stands 27 5/8" tall without a top on it. The tops that were on these was 29 3/4" square by 1 1/4" thick and were covered by wood grain look formica. The formica does have some chipping. Bases weigh around 16 lbs each before packing. They have paint wear and some minor rust. No metal parts are chipped.Cracked or broken. I have a total of 4 tables-you are buying a set of 2. Bases are from around the 1960's and previously came from a small restaurant. 37b5d 30/15/15/5d s.Be a smart ... moreshopper and click on the all details link at the shipping cost portion of the page. You might find the 2nd method of shipping is much cheaper. I do accept payment in other forms other than paypal. Please email and ask if you don't want to use them. PLEASE NOTE EBAY IS REQUIRING SELLERS TO USE THE SHIPPING CALCULATOR AND It will not be exactly correct on items that must be shipped in more than one box-such as pairs of speakers, sets of dishes, pair of large lamps, etc MANY TIMES IT IS CLOSE BUT NOT EXACTLY CORRECT.Please email for a shipping quote on items that require more than one box.Also please note that when Ebay combines multiple items they do not take into account it needs a bigger box and might then be charged dimensional weight. Due to Ebay now charging a fee on the shipping cost I have discontinued shipping International. Do not expect to buy the item and force me to ship it to you. If you want the item badly email me and see if I might consider shipping it. The items I sell Might or Might not be from a smoke fr
|
|
|
ONE LOT VARIOUS DRAWER PULLS FOR RESTORATION PROJECT
ONE LOT VARIOUS PCS DRAWER PULLS AND SOME SCREWS FOR RESTORATION PROJECTS. HOOK TYPE PULLS ARE APPROXIMATELY 3.5" WIDE. PLEASE SEE PICTURES FOR BEST DESCRIPTION. ANY QUESTIONS PLEASE ASK
|
|
|
PAIR OF VINTAGE ART DECO PORCELAIN ENAMEL SHELVES / PANELS / TOPS
This is a nice pair of porcelain enamel tops or shelves which measures 1" x 40" wide x 10" deep. I have seen these with iron brackets attached at the bottom for use as a shelf. There is a wood frame around the bottom which would make it easy to attach brackets. They are in very good condition, one chip on the edge of one which you can see in the pictures. The inside edge is beveled. They available for pickup or can be shipped by Fed Ex for 16.80 including insurance. We will gladly combine lots whenever possible to save on shipping costs. Please e-mail with any questions. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1404b51c416-0xeb-
|
|
|
VINTAGE KITCHEN PORCELAIN ENAMEL TABLE TOP WHITE W/ BLACK TRIM 30" X 25"
This is a vintage porcelain enamel table top. With black trim. It measures 30" wide x 25" deep. There are some scratches and wear as well as some chips which you can see in the pictures, we provided a number of pictures to provide a better idea as to the condition. It is available for pickup or can be delivered by Fed Ex ground to the lower 48 states for 18.80 including insurance. We also have some other enamel tops presently listed. We will gladly combine lots whenever possible to save on shipping costs. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1404b51c39a-0xf7-
|
|
|
Victorian Era Solid Quartersawn Oak Hanging Coat /Hat Rack
Up for bid is a very nice Victorian era hanging Hat rack/Coat rack/Halltree. Frame is in excellent condition. Just need new/used halltee hooks. Frame is solid tiger oak and is 42.25" long x 26" tall(center of radius) x 1.5" thick. Inside glass/mirror/panel measurement is 24.25" long x 22.25" tall. Please see our other wonderful architectural and Victorian items.
|
|
|
Super Rare 58" long Quartersawn Oak Roll Top Desk Tambor & Housing
Up for bid is a rare 58" Long Quartersawn Oak Veneered Rolltop desk tambor and housing. This was a well done roll top desk at the time it was built based on the high quality of the veneers and brass locking mechanism. Housing is 58" long x 30" deep and 20.25" tall. Tambor is in excellent original shape with housing in very good shape except for peeling veneer on one side of the housing in small veneer chip on top shelf all pictured. This item is to big for shipping other than for pick-up in zip 21921 or shipping through a blanket service. Please see our other wonderful architectural and Victorian items.
|
|
|
Sweet Pair of Victorian Walnut and Burl Pump Organ Sides
Up for bid is a lovely set of Pump Organ sides. These make great Pilasters. Desk sides, etc.etc. These sides are in very nice shape, with some minor blemishes, which are pictured. Sides are 53" tall x 25.5" deep and 5" wide. Please see our other wonderful architectural and Victorian items.
|
|
|
2-Matching pairs of 1840's cherry Furniture Feet -Beautiful 170-year old Patina
Up for bid is a nice 4-set of furniture feet. I cut these from some 1840 bed posts that I made into a bisto table for my house with the rest of the columns. These are 11" tall and 4& 6/16" wide. These feet are in great shape. And have some really good patina going. Except for the 2-defects as photographed, these feet are delicious. I left enough on the bone for auction winner to cut down to the size they need. Please see our other wonderful architectural and Victorian items.
|
|
|
Pair of Quartersawn Oak Highly Carved Blocks / Embellishments
Up for bid is a very sweet pair of Quartersawn Oak Plinth Blocks/ embellishments/ locks. These are highly carved and of choice Quartersawn White Oak. The carved block sizes are as follows: 2) 7" x 4" x 1.5" 1) smaller carved lock is 5.5" tall x 2" wide x 1" thick, and(2) non-carved quartersawn blocks which are 5.5" tall x 2" wide and 1" thick. Please see our other wonderful architectural and Victorian items.
|
|
|
Victorian Oak and Glass Entrance Door with Great Carvings
Up for bid is a lovely Victorian Entrance door. Door has beautiful and complete sets of carving on all quadrants of the front side and is un-embellished Quartersawn Oak on the back side of the door. Entrance door is solid oak. But has 2/16" Quartersawn Oak veneer on both sides of the door. This entrance door will hold up much better if it mounted on a doorway with a porch to protect the door. Door is 79" Tall x 34" wide and 1.75" thick. Bottom of door with molding is 4.5" deep. Door has a sliver of wood missing and this is pictured in Photo#11. it is the bottom left. Glass is in great shape and clear. 2-pieces of molding missing top and bottom of inside, and one egg and dart is missing from bottom of glass on front door. This is a delicious door.don't miss this one. Please see our other wonderful architectural ... moreand Victorian items.
|
|
|
Vintage NOS Wood Legs Set of 4 Chair, Couch, Sofa Mid Century Furniture parts 2"
Mid-Century 2" Sofa/ Chair legs. These are new old stock found at an estate sale.
|
|
|
*=*= VINTAGE DRAWER-CABINET Pulls~National Lock 1973 ~ 29 Available for Sale
Nice Vintage Cabinet/Drawer Pulls- 29 for Sale! Listing is PER cabinet pull These could possibly be Copper or Iron- I have no way of knowing exactly. There is some oxidation happening on some of the hardware- which I think gives it a great vintage look! 3 1/2" from hole to hole 5 3/4" Long We always include plenty of pictures for you to judge condition of item for yourself. If you would like more pictures or information. Please email us before you bid. We do not claim to be experts in this field or any field; we simply list items that we have collected over the past several years. Most of the items listed here on eBay have come from many great finds in small Western Kansas towns. PAYMENT: Payment must be received within 3 days from close of auction. Anything made out of glass will be automatically insured. If you cannot make payment ... morein that time frame– please contact me so we can work something out. Thank you for bidding and have a wonderful day! TERMS OF SALE: We are interested in your satisfaction and will be happy to accept returns within 14 days of receipt of item if item is not as advertised. However. It is the responsibility of the buyer to pay for the shipping of that item that is to be returned. The item must be in the same condition as it was when shipped to the buyer. If the item return arrives damaged. Then no refund will be given. The best thing we can suggest is to just contact us and let us work together to resolve the issue. You will find that we are very easy to work with. I will gladly combine postage on multiple items:o) SHIPPING: We try to mail everything PARCEL SELECT to help save you money! Items may come priority mail if we find that will be the least expensive way to ship. If you would prefer to receive your package sooner(EXPRESS MAIL) then let me know immediately after bidding. We pack items securely. And shipping costs are always what the eBay calculator figures for that size and weight, including Delivery Confirmation so you can track your package. We don't make money on s
|
|
|
Vtg 1960's Atomic Age Retro Iron Table Base Kitchen Patio Bar Mid Century Modern
This is a very nice circa 1960 iron table base. A little paint wear on the edges of the support bars. No breaks or cracks and still has original gold plastic feet caps. Measures 29" tall. 20" wide base and 7" square mounting plate. Thank you!
|
|
|
LOT OF 19 ANTIQUE WOOD CASTERS-PLUS 2 PLASTIC ONES- TOTAL 21
16 STAMPED- A SHOOTING STAR WITH M-5- ONE HAS A FLAT SPOT-ONE OF THE LARGE IS A BROKE WOOD WHEEL- PLEASE LOOK AT PICTURES- STEM ON THS 16 1 1/2"2 3/4" TOTAL- A LITTLE DIRTY BUT WILL CLEAN UP NICE- TOTAL OF 21.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1404b51c3a4-0x103-
|
|
|
Large Lot of Antique Vintage & Modern Castor Wheels Old Furniture Parts
Selling off all my our collectibles and family hoarded stuff. Up for auction is a large lot of Castor Wheels. Some are older than others. Really don't know age. The large wheels are 3" inches and the smallest wheels are 1.25" inches. See pics for details. Thanks for looking! I will answer any questions promptly. No reserve, lots of pics, sold as is, buyer to pay $15.00 shipping in the Continental US. Will ship anywhere for actual shipping cost. The worldwide shipping cost I have listed here is just a guideline. All depends where you are and how much all the items you buy weigh. If you are in Alaska, Hawaii or Canada I am happy to charge you actual shipping whatever that may be as well. Thanks for looking!
|
|
|
4 Vtg INDUSTRIAL SWIVEL CASTER SET Old Factory Cart Cast Iron/Steel/Metal Wheels
THIS IS OLD NEW STOCK METAL WHEELS FOR CARTS. PURCHASED DIRECTLY OUT OF WAREHOUSE. LOT OF 4 PIVOT WHEELS. 3 1/2' DIAM, WIDTH IS 1 1/2" MEASURES 4/3/4 TOP TO BOTTOM. SURFACE RUST. PIVOT TURNS EASILY.BALL BEARINGS. ALL ARE MARKED PAYSON 3 1/2 W 5. MORE TO COME! ALL SIZES. I AM SHIPPING US PRIORITY MAIL. PAYMENT DUE WITHIN 3 DAYS OF AUCTION END
|
|
|
ANTIQUE ARCHITECTURAL SALVAGE RECLAIMED 1890'S PUMP ORGAN KEYBOARD B
This is a very nice keyboard from an 1890's pump organ. It measures aprox. 35 1/4" wide x 11" deep and is in excellent condition. No chipped or damaged keys. Please e-mail with any questions. We will gladly combine lots whenever possible to save on shipping costs.
|
|
|
~ 4 ~ ANTIQUE - Victorian Cast Iron Ornate Claw Foot Bath Tub FEET restoration
~ 4 ~ ANTIQUE- Victorian Cast Iron Ornate Claw Foot Bath Tub FEET restoration ANTIQUE 4 LARGE Scrolls& Curves CAST IRON FEET for you Bath tub Late 1800's to the early 1900's These are 5-1/2 inches tall. Full length, from top to bottom. These are exactly what you see. Check the photos. If you have any questions. Just ask Thanks
|
|
|
Antique White Porcelain Furniture Rollers - Set of 4
Antique White Porcelain Furniture Rollers Approx. 1.75 inches in diameter Approx. 4.25 inch shank Used on Antique Victorian and other Period Furniture such as Beds and Tables Very Good Condition
|
|
|
Industrial Salvage Metal Art Deco Screen Door Plates Steampunk Machine Age
Measures 11 x 8 inches. Metal, is rusted so it has that great salvage look, really solid, great to hang on wall, make into shelf ends, book ends. Ships with delivery confirmation. A super find for that someone who has everything. The letters appear to be an" S" inset in the piece. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GERBER DELUXE EARLY AMERICAN LEGS 6'' UNFINISHED WOOD AND HARDWARE SEALED BOX
FROM GERBER IS THIS SET OF FOUR EARLY AMERICAN COLONIAL LEGS. MADE OF UNFINISHED HARDWOOD.6INCHES LONG EACH. SET ALSO HAS FOUR MOUNTING BRACKETS, FOUR SELF LEVELING FLOOR GLIDES AND SIXTEEN SCREWS. HAS ORIGINAL BOX. BOX HAS STAINS,EDGE WEAR AND A TEAR ON UPPER LEFT CORNER. FROM A SMOKE FREE HOME.
|
|
|
Misc. Pieces of Decretive Antique Wood and Finials-Mainly Walnut
Approx. 100 pieces of wooden(very few ceramic) decretive accents and finials. I have been a woodworker and antique refinisher for years and finally breaking up my shop. These pieces were very useful when finishing up a project. Have collected for years. Thanks for looking.
|
|
|
Antique Victorian Corner Shelf Folk Art Fret Carved Hear Design Cherry Wood
This 1865-1885 hand cut primitive shelf measures 15”tall x 20” wide x 9” deep. It was mounted in the corner of a room and has no back pieces and comes apart with many replaced nails as shown. The wood is original with no major losses or repairs and has a very old refinished surface. WE ARE ALWAYS HAPPY TO SHIP WORLDWIDE IF ALLOWED BY USPS. Please contact for international shipping cost quote. Stated U.S. shipping charges are for FEDEX GROUND in the contiguous 48 states. Higher rates may apply for AK and HI or USPS shipping. Please e-mail me if you have any questions. PAYMENT POLICY: Unless arrangements are made prior to bidding. Payment is expected within 7 days after the end of the auction or the item will be re-listed. Visa/MasterCard payments accepted through PayPal. Indiana residents must add 7% sales tax. On all INTERNATIONAL SHIPMENTS ... moremerchandise will be declared as such(not gifts or commercial samples) and value stated as the actual sale price. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage marble and shattuck Iron Swivel Tilting Chair Base Adjustable Height
you are bidding on a vintage marble and shattuck chair company base. this base was salvaged from a vintage oak high back bankers chair. it is fully adjustable for height and tilt comes with all necessary screws to install it on a chair shipping will be 18.75 any questions please ask On Aug-01-13 at 18:55:35 PDT. Seller added the following information:
|
|
|
Machine Age Industrial Antique Cast Iron Two Tier Table Base Plant Stand Legs
Machine Age Industrial Antique Cast Iron Two Tier Table Base Plant Stand Legs Description Here is an unusual antique two tiered cast iron base.Not sure who the maker is but i know Kenney Bros. Wolkins made similar ones This would make a great two-tiered coffee table. End table, bench, stand, plant stand or whatever else you can dream up. Great industrial look, and is in great shape no cracks or repairs. Refer to the pictures for finish condition. There is light surface rust in places. They could be easily cleaned up and repainted or left as is to really show their age. The height is 23" to the top tier and 19 1/2" to the bottom of large tier base. The top mount of the tall arm is approx. 8" X 7 1/2" with 7 mounting holes. The oval bottom of base is is 10 x 14 1/2 has 8 holes. The shorter tier adjusts 11 1/2- 14" Top ... moreplate of short arm 8 x 7 has 7 holes. Marked on base is A S-31-E.A. Pat. 7.7.25. I also will be listing a smaller base that was used as a chair.Almost anything could be used for a top. It would look really cool with a weathered piece of barn board or a nice hardwood on top Or could be mixed with part table and part plant stand. Or both used in as a cool industrial two-tiered industrial table. could just remove both arms and use the base for a side table etc. This item is large and heavy so shipping is high. You are welcome to pick this up in Monson Ma. 01057 to save shipping. Thanks for looking and Happy Bidding
|
|
|
4 Antique Porcelain Furniture Large Casters Wheels with Mounts
From a recent Kentucky Estate I am offering 4 antique porcelain and metal wheels. They are heavy duty and measure 2.25 to 3 1/8 inch on the metal shaft. From the tip of the shaft to the base of the wheel is 5 Inches. The porcelain measures 2 inches high& 1 1/8 inch wide. They weigh 1 pound 14 ounces. Hence the 3 pound rate! Be sure to see the others items I have up for sale! Please e-mail any questions. I will gladly combine wins if possible to save on shipping! Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4 Mid Century Modern/Retro Wood Tapered Table Legs, Blonde
All in very good vintage condition. Slight scratches and nicks. The longer legs are 14 3/4" tall, one leg has a slightly taller bolt with a small nail, it may have been adjusted at one time but they both measure the same on a table. Smaller legs measure slightly over 7 1/2" long. Ship to USA only. Accept Paypal only. Thanks
|
|
|
Antique New Mexico Dug Up Gun Parts Locks Trigger 1840
I have a good friend who is a serious metal detecting enthusiast. He covers a lot of the remote areas of New Mexico looking for early metal relics. Normal.dotm 0 0 1 15 88 Zon Intenational Publishing 1 1 108 12.0 0 false 18 pt 18 pt 0 0 false false false Here are 6 early gun locks plus a spring and trigger all found at different sites in northern New Mexico. THe look to date to around 1830-50. The metal is solid. I will be listing several more groups of relics found by the same fellow. Payment is due within 3 days or I may re-list the piece! Study the pictures before bidding. And ask questions if you are unclear about anything, be sure item is what you want before purchasing, because I DO NOT take returns. We described things as best we can but we are not experts in every field. You may know more about the item then we do. You are the judge ... moreas to quality and value. I try to list several new items every few days, so keep checking my listings that include many early Cowboy, Cowgirl and Mexican pieces selling all the time. I’m located in Santa Fe, NM.
|
|
|
Antique Globe Barrister Lawyer Stacking Oak Bookcase Book Case w/ Rare Top
Antique Globe Barrister Lawyer Stacking Oak Bookcase Book Case w/ Rare Top. No door in the bottom section. All vintage items show some wear and imperfections they have acquired through the years. Please see the photos and ask questions. Buyer must pickup in Montgomeryville. PA 19454 or buyer is responsible for all shipping arrangements and fees. Delivery also available for $2.00 per mile round trip within a 30 Mile radius, with a minimum delivery charge of $75.00. Buy with confidence. I have been selling on eBay since 1998 and have a 100% excellent rating. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage Antique Eagle Claw Foot Table Leg End Cast Iron and Glass Ball nice
Vintage Antique Eagle Claw Foot Table Leg End with Glass Ball. About 4" long. Hole at top is approx. 7/8" diameter. I believe this is cast iron as it has a wonderful petina about it. Nice glass ball with a flat ground on the bottom. If you have a damaged one that matches this. Get it while you can. This is our only one. Displays nicely. Shipping to USA address only.
|
|
|
Asian Modern lacquered 5foot octagonal TABLE TOP FRAME with FREE S/H!!
COOL vintage table top frame.5 feet diameter! Good condition. Plenty of scratches and wear but it can easily be restored. I actually have the smoked glass top itself. But can't ship it.if you're interested, let me know. My prices are very negotiable. Please don't hesitate to MAKE AN OFFER if you're interested! I desperately need your 5-star DSR ratings and will do whatever it takes to earn your complete satisfaction! Should you have an issue. I do believe in partial refunds to keep my customers happy. FREE SHIPPING! through USPS to your doorstep(taken apart into sections)
|
|
|
TWO Matching PAIRS of industrial CHANDLER "THE BOSTON" adjustable Cast Iron LEGS
Wow! Very hard to find a MATCHING SET of two pairs.perfect to make a pair of tables or even a larger table with much more stability. Good condition. Nice original surface.but there is rust, so they could be repainted. ONE HAS DAMAGE.missing an"arm" that goes up to the top bracket. Somewhat hard to notice. BOTH PAIRS ARE EMBOSSED"Chandler- The Boston" with patent information. Etc.dated 1897 and both are marked"J3" Measurements: lowest height 13 1/2" highest height 20 1/2" feet spread 10 1/2" My prices are very negotiable. Please don't hesitate to MAKE AN OFFER if you're interested! I desperately need your 5-star DSR ratings and will do whatever it takes to earn your complete satisfaction! Should you have an issue. I do believe in partial refunds to keep my customers happy. FREE SHIPPING! ... morethrough USPS to your doorstep
|
|
|
Vintage Industrial Metal Wheel Rustic Industrial Home Decor
Vintage Rustic Metal Wheel Perfect item for anyone who has a rustic or industrial feel at home or the office. Measures: 8.5" diameter Note: Paypal only. Payment is due within 1 business day of wining bid. Item will ship within 3-5 business days after payment is processed. US bids only. No returns. No international buyers.
|
|
|
5 DECORATIVE VINTAGE CAST ALUMINUM FURNITURE LEGS
UNIQUE SALVAGED DECORATIVE CAST ALUMINUM CABINET LEGS THE 5 PIECES ARE ALL BRASS PLATED OR PAINTED CAST ALUMINUM THEY HAVE AN EGYPTIAN THEME
|
|
|
antique shabby Victorian porcelain casters wheels bed dresser table repurpose
Lot of five(5) antique porcelain casters from an 1860's-1870's dining table. They are in good condition and spin freely and roll good. Four of them have shorter shafts on them and one is longer. The longer one was on the center leg of the table. A couple have small chips but not on the rolling surfaces. Wheel diameter is 1 5/8" and the width. track of the wheel) is 5/8" The four shorter shafts are 1 3/8" long. The single longer shaft is 2 1/4" long. Please note: These wheels do not swivel. They were made to be inserted directly in a hole drilled in the leg. They must all be set facing the same direction. Furniture could be pulled straight out from the wall to clean behind and under. Often used on single beds in the mid and late 1800's so they could be pushed up against the wall in the daytime in order to save ... morespace. FREE SHIPPING! PLEASE FEEL FREE TO E-MAIL ME WITH ANY QUESTIONS BEFORE BIDDING. PLEASE EXAMINE ALL PICTURES AND USE"ZOOM" WHEN AVAILABLE! I AM A TRUSTED EBAY SELLER WITH LOTS OF U.S. AND INTERNATIONAL FEEDBACK FROM OVER 65 COUNTRIES AROUND THE GLOBE. FINLAND.SWEDEN,NORWAY,ICELAND,ISRAEL,SAUDI ARABIA,JORDAN(hi Waseem! AUSTRALIA,FRANCE,GREECE,THE MALDIVES,MALTA,UNITED ARAB EMIRATES,VIETNAM,BRAZIL,MEXICO,PORTUGAL,ANDORRA,SPAIN,JAPAN,AZERBAIJAN,AND GERMANY JUST TO NAME A FEW THAT COME TO MIND. PLEASE CHECK OUT MY OTHER AUCTIONS FOR A WIDE VARIETY OF VINTAGE,ANTIQUE,UNIQUE COLLECTIBLES AND OTHER STUFF I SELL. YOUR BIDS ARE GREATLY APPRECIATED! I SHIP WITHIN 24 HOURS OF RECEIVING PAYMENT AND GUARANTEE MY ITEMS.SEE MY RETURN POLICY. We take a lot of care to pack our items safely and securely. We also always try to ship within 12- 24 hours.Many purchases are shipped the same day, especially when a buyer chooses Priority Mail. Please understand that to ship your purchase safely and securely, it takes materials(boxes, tape, envelopes, bubble wrap,styrofoam peanuts,etc.time to package, and time and gas to go to the post office and stand in line. Therefore, there may be a
|
|
|
ANTIQUE FRENCH INLAY WOOD BOWED TAMBOUR DOOR PANEL RESTORATION PROJECT
PRICED TO SELL! ECONOMY BLANKET WRAPPED GREYHOUND SHIPPING! Bid now- this is a buy it now listing- first bid always wins! ANTIQUE FRENCH INLAY WOOD BOWED TAMBOUR DOOR PANEL RESTORATION PROJECT Will be sold as restoration project for an experienced wood worker. Can be turned into door for the corner cabinet or into sliding roll top desk, etc. Quality inlay work. Minor problems as pictured, including several missing pieces of the veneer and some finish imperfections which would be gone completely after the stripping. As an option we can offer our help to restore it to perfection. We were in furniture restoration business for more than 35 years and can make them like new. We have all types of veneers to match the color and structure of missing pieces, our discounted rate is $100 per hour. Nice part. But bulky and heavy to ship therefore returns ... moreare not welcome, so please ask all your questions before you bid or do not bid if you don’t know what are you doing. Our wording is our unprofessional opinion only. Because people use words differently. And you probably know exactly how to describe our item, we provided many crispy clear pictures as our description: OUR DESCRIPTION: 1. DESCRIPTION: Our description consists of our pictures only. Measuring tape will show you sizes– pictures can’t lie- please rate us 5 star for the quality of our photos! 2. COMMUNICATION: If you want to communicate please call us and we will chat. Our phone number is 408 757-1602 Mon-Fri 10-5 Pacific Time. We will leave you our happy feedback for your payment and take care of problems if item is lost or damaged in shipping. If you know what else we can do to get your 5 star rating in communication category just let us know– we need these 5 stars! 3. SHIPPING CHARGES: Before we sell we won’t know where we have to ship. So our shipping charges are pre-estimated and actual shipping cost might be more or less than estimated. The good thing is that you will never pay more than estimated, so you will know ahead of time what will be your exact
|
|
|
Miscellaneous Vintage Tin Drawer Pulls Salvaged!
Vintage Tin Drawer Pull Faces None of these are functional drawer pulls These are all salvaged pieces there are 8 pieces in total these are in poor condition im sorry but i dont have any dimensions on these pieces No returns all sales are final selling as is
|
|
|
Antique Cast Iron industrial table legs commercial steampunk sewing Singer
This is a great set of antique cast iron legs for anything you can think of they are super clean 28 1/8 inches tall and 11 3/4 wide at top and 18 1/2 wide at bottom. These came from a treadle sewing machine and there just aren't many of these left and repurposing them for a table base or what ever you can think of will be a great project. They are heavy so Shipping only to lower 48.
|
|
|
EXCELLENT ORNATE CARVED TAPERED MAHOGANY LEGS SET OF 4
Set of 4 stunning tapered mahogany legs- beautiful ornate acanthus leaf carvings- each legs measures 21 inches long x 3.5 inches wide-below the carving the legs measure 3 and 3/4 inches on all sides and taper down to 2 and 5/8 inches- the portion of the table side to which the legs are still attached measures 27.7 inches long x 3.5 inches deep x 4 inches high- ships via Fedex insured to the lower 48 for $34.00 within 3 business days of payment- payment expected within 3 days of auction end
|
|
|
ANTIQUE BRASS HARDWARE FOR OAK WOOD ICE BOX ICEBOX
THIS AUCTION IS FOR A COMPLETE SET OF BRASS HARDWARE FOR AN OAK ICEBOX- THERE ARE 6 HINGES 4 1/4" LONG AND 2 7/8" WIDE- 3 LATCHES. 2 RIGHT HAND LATCHES NUMBERED 406R 5" LONG AND 2 1/4" AT WIDEST POINT- 1 LEFT HAND LATCH NUMBERED 406L 5" LONG AND 2 1/4" 2 CORNER PIECES 2 1/2" LONG AND 1 3/4" WIDE- MARKED IN THE HANDLES- PAT. JUL 1921- LOOKS LIKE THERE IS LACQUER ON ALL THE PIECES THANKS FOR LOOKING AT MY AUCTION- IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO CONTACT ME- HAVE A GREAT DAY!
|
|
|
Set of 4 Heavy Solid Maple Farm Table Legs w/Block for Shelf or Stretchers
This is a new unfinished set of 4 quality. Heavy, solid maple Farm-Table turned legs w/ a square block at the bottom for a shelf or stretchers/ 3" square. Made here in Vermont.The legs are@ the widest point 3 1/2" or circumference(wrapping the tape measure around the leg) are 10 1/2"They are 29 1/4" tall. The shoulder/top/corner is 4" high X 1 3/4" They are new but may have some very slight scuffs from being moved around.no pre-drilled holes in the corners) Shipping will be an additional $35.00(as they are very heavy)Check my feedback from other buyers who have purchased these same legs from me.everyone loves them& they are a great bargain! ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-1405342e150-0xf6-
|
|
|
VINTAGE BRASS SCREW ASSORTMENT FOR RESTORATION/CABINETS/FURNITURE 19 POUNDS
VINTAGE SOLID BRASS SCREW COLLECTION FROM FURNITURE RESTORER'S WORKSHOP. A COLLECTION OF OVER 40 YEARS. THIS GENTLEMAN ALSO WAS A TRIM CARPENTER AND DOOR LOCK INSTALLER. THIS A TOTAL OF 19 POUNDS OF SCREWS. ALL UNUSED OPEN BOXES. MIXED BOXES, RANDOM SIZES AND COUNTS. SOME BOXES ARE FULL AND SOME ARE NOT. SOME ARE/WERE BOXES OF 100 AND SOME WERE BOXES OF 1000, DEPENDING ON SIZE OF SCREW. SOME ARE DUPLICATES. TYPES ARE PHILLIPS AND FLAT HEAD SCREWS. HEAD TYPES ARE FLAT. PAN HEAD AND ROUND HEAD. MAJORITY ARE WOOD SCREWS. VARIOUS SIZES AND LEGNTHS. MOST RANGE IN LEGNTH FROM 2" DOWN AND I BELIEVE THE LARGEST SIZE IS A NO. 12 SCREW. BOXES ALSO INCLUDE COPPER NAILS, BRASS NAILS, BRASS PINS. I CANNOT SAY YOU WILL RECIEVE A TOTAL NUMBER OF"X" BOXES BECAUSE SOME BOXES MAY BE COMBINED FOR SHIPPING. I WILL MAKE SURE EVERTHING IS SEPARATED ... morePROPERLY AND PACKED FOR SHIPPING. I DON'T HAVE TIME TO PIECE-MEAL THIS STUFF. WHAT YOU SEE IS WHAT YOU GET. PLEASE SEE PICTURES AS THEY ARE PART OF THE DESCRIPTION. ANY QUESTIONS PLEASE ASK. SPECIFIC COUNTS ARE AVAILABLE UPON REQUEST REGARDING CERTAIN SIZES AND BOX CONTENTS. I AM NOT TRYING TO PULL A FAST ONE ON ANYBODY. THE TWO UNOPENED BOXES IN THE UPPER CORNER ARE PRACTICALLY FULL. I JUST DO NOT HAVE TIME TO COUNT THEM ALL. NO INTERNATIONAL SHIPPING e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-1405342e0e5-0xed-
|
|
|
Cast Iron Industrial Fan Stand Steampunk Table 3-Legged Stairstep Base Vintage
YOU ARE BIDDING ON A RARE VINTAGE CAST IRON FAN STAND. IT HAS WEAR DUE TO AGE. USE, STORAGE. IT IS IN GOOD CONDITION WITH NO CRACKS THE STAND MEASURES AROUND 36" TALL. THE BASE IS 20" APART ON THE LEGS. THIS UNIQUE PIECE HAS A 3 LEGGED STAIR STEP BASE. THERE IS METAL LABEL FROM AIRMASTER AIR CIRCULATION IN CHICAGO. VERY GOOD SOLID CONDITION, VERY HEAVY BUILT. SELLING AS IS. GREAT FOR A STEAMPUNK TABLE. STAND OR LAMP.
|
|
|
6 VINTAGE MID CENTURY MODERN RETRO TABLE Ottoman LEGS LOT
Lot of 10 wooden mid century table/ottoman legs. 4 of them measure 10 1/4" long and look like they are made of oak. Two of them have cracks in the gold toned cap at the bottom. All of them have screws present. 6 of them measure 6" long. Looks like unfinished oak. 3 of them are missing gold toned caps on the bottom. All have screws present. There are 6"brackets" 4 larger ones measure 4 3/4" long. 2 smaller ones measure 3 1/2" long. All of the brackets have rust present. Please scroll down to see all photos. These are heavy so will be shipped in a medium flat rate box.
|
|
|
PORCELAIN CASTERS - 1 METAL CASTER
I have 3 porcelain casters that measure 2 1/4" long on the shaft. The wheel is 1 1/2" in diameter. The metal wheel is 2 1/4" long in the shaft and the wheel is also1 1/2" in diameter. I tried to take pictures so that you could see the true condition(rust) I did not try to clean them, so I am unsure what condition they are really in. I do know they are very old. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1405342e190-0x104-
|
|
|
VINTAGE BRASS SWIVEL FURNITURE CASTERS SET OF FOUR COMPLETE WITH STEMS
UP FOR BIDS Vintage Brass Swivel Furniture Casters Set Of Four Complete With Stems These vintage rolling swivel style brass casters are in good working condition and were used on our vintage upholstered chair. These casters worked great on our rugs but when we removed the rugs and refinished the floors. They were too hard and scratched the finish so we replaced them with a set of soft rubber casters. All are in good working condition and are solid, weighing 6 oz. each. The one caster stem is missing a side piece that locks under the lip but the remaining side piece will hold the caster in place. I would eventually replace it though. All show signs of cosmetic wear and will look nice once cleaned and polished. The last picture listed will show all four of the stems with the stem that is missing the side being the last stem in the pic. Contact ... moreme at the end of an auction if you wish to continue bidding on other listings that I have as I will send you an invoice with combined shipping on all auctions that you win within 3 days from the date of your first auction win. Upon receiving cleared payment. I print shipping labels ASAP, often within minutes of receiving payment if I happen to be on the site at the time. I strive to ship items fast. Questions: Please contact me with questions before you bid. Payment Methods: Paypal. Communication: Payment is expected within 3 days of auction end. Feedback: When you receive your purchase. Please leave positive feedback if you are satisfied with this transaction. I will leave feedback for you after feedback is received. If there is a problem, please contact me before leaving negative feedback. I will respond to your question or concern within 24 hours. My goal is customer satisfaction. Shipping: Shipping costs usually include the expense of a bubble mailer and other shipping supplies that I use in packaging items. I ship within one business day after receiving cleared payment. Please consider insurance as an option. It is peace of mind. I am not responsible for packages lost o
|
|
|
Rare Cream Separator Base Steampunk Stand Cast Iron Steampunk 4Legged Vintage
YOU ARE BIDDING ON A UNIQUE RARE VINTAGE CAST IRON CREAM SEPARATOR BASE. MEASURES AROUND 18 1/2" TALL BASE LEGS ARE 14" X18" THIS IS A VERY UNIQUE CREAM SEPERATOR BASE. THERE IS A SMALL HOLE AT CENTER ON TOP SURROUNDED BY TWO LARGER OVAL SHAPED HOLES. THERE IS A LARGE RECTANGLULAR HOLE IN THE FRONT AND TWO PIECES COME OFF THE BACK WITH HOLES FOR SCREWS. IT ALSO HAS HOLES FOR SCREWS ON FEET. IT HAS WEAR DUE TO AGE. USE, AND STORAGE BUT IT IS IN VERY GOOD SOLID CONDITION, NO CRACKS OR BREAKS. VERY HEAVY BUILT. SELLING AS IS. GREAT FOR A STEAMPUNK ITEM.
|
|
|
Super Large Carved Lion's Head Tiger Oak Door Panel
8-1-13(23) This is a super lion's head door. It is all tiger oak. This is one of the largest heads I have owned. There are hinge pins and a lock. This is one of a pair being sold separately. Circa 1880's. They are in original finish. Perfect condition. 22" High X 19" Wide X 4" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Solid Oak Carved Winged Standing Griffin
8-1-13(26) This is a solid oak winged griffin. It has been painted. It is painted over varnish and should strip easily. It is all intact. 14" High X 4" Wide X 9" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Pair Tiger Oak Barley Twist Columns
8-1-13(35) This is a pair of tiger oak columns. They are in very good original condition. They are clean and have no damages. 20.5" High X 2.25" Wide Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Pair Tiger Oak Ball & Claw Foot Column Feet
8-1-13(36) This is a pair of tiger oak feet. They came from a sideboard. They are ball& claw and carved The backs are not flat. These came off of the corners of the sideboard. They are in original finish. 11.5" High X 4" Wide X 5" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Pair of Highly Feather Carved Lion Head Bench Arms
8-1-13(33) This is a great pair of highly carved arms from a hall bench. they are feather carved with flowers and leaves. The lion heads are drisp and detailed. They are a little loose at the joints. 19" High X 3" Wide X 18" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Pair Oak Carved Trim Molding
8-1-13(32) This is a pair of carved moldings or trim. They are solid oak. They have been antiqued. 4" High X 14" Wide X 3" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Pair Mahogany Standing Winged Griffins Claw Feet
8-1-13(22) This is a great pair of mahogany winged griffins. They are solid mahogany wit the original dark finish. They are both intact. They are in super condition for their age. One wing has been repaired. 24" High X 15" Wide X 11" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|