|
4 Vintage Brass Lion Head Drawer Pulls
4 Vintage Brass Lion Head Drawer Pulls in good condition. Screws are included. NOTE: Please wait for an invoice before checking out so that $1.70 can be added to your total for insurance. Your item will be well packed to ensure safe delivery. But I cannot be responsible if the post office loses or damages your package. If you check out before receiving an invoice your item will ship without insurance and at your own risk. If you do not want insurance please send me a message or check out immediately. Invoices will be sent within 24 hours of close of auction. Posted with
|
|
|
VINTAGE BRASS AND METAL CASTER WHEEL 4 7/8" tall / 1 7/8" across the wheel
Here is a large vintage caster wheel which measures 4 7/8" tall and 1 7/8" across the wheel. The wheel is brass around the rolling section with additional brass on the wheel sides. The attached pieces are metal. Please view photos for condition. Check out my! Be sure to add me to your!
|
|
|
4 Antique Vintage Metal Tin & Brass Furniture Remnants Hardware Drawer Pulls
Up for auction are four matching metal antique Victorian era hardware furniture pulls recently found at auction in the Lancaster County. PA area. They are offered in good used condition and feature a nice cartuche form and retains original screws in two of the four pieces. A cleaner pull is on one piece, but one with the original patina is included. This is what was found and all will be included to the winning bidder. The backing is tin and the pull is brass. The backings are approximately 1 3/4" in diameter. Pulls extend approximately 2" from the backing. A very nice find, great for reuse on any piece of furniture or to be repurposed on any steampunk style project. They are marked in back of the pull as follows, KBC" and"H94" These pieces could benefit from a light cleaning. Please see the other hardware. Fine antiques ... moreand collectibles we offer for sale or in auction form. Discounted shipping rates with multiple purchases sent in the same package. Best of luck in bidding.
|
|
|
Set of 4 Antique/Vintage Brass Furniture Casters
Set of four antique brass casters with beautiful original patina. In excellent condition. Wheels swivel and turn easily. Wheel diameter is 7/8" Visible height of the casters(after installation) is 1 1/4" Feel free to contact me with any questions. Thank you for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fv%7F.rpn37%3E-13d74a37293-0xff-
|
|
|
4 VINTAGE ANTIQUE CAST BRASS BRONZE LION CLAW FOOT FURNITURE TOE CAPS w/ CASTERS
4 VINTAGE ANTIQUE CAST BRASS BRONZE LION CLAW FOOT FURNITURE TOE CAPS w/ CASTERS For Your Consideration: 4 cast lions paw claw foot toe caps for furniture legs. Though they are brass colored on all exposed sides. And even through the screw holes, they are magnetic. Feet meaure 2" deep(3" including the mounting tab) 2-3/4" tall including the caster(1-1/4" for just the foot) and 1-1/4" wide. The opening is ~1" square. Please see pictures for additional details and feelfree to email me with any questions. Online Enterprises is a small. Family owned business that has been picking for over 10 years. We go out to local auctions, estate sales, private sales, flea markets, garage sales, ect. to bring you rare and unusual items every week! Please don't be fooled by our low starting bids. No matter the value ALL ITEMS ... moreSTART AT $0.99, NEVER A RESERVE. We go picking every week so you don't have to, enjoy! Except in cases of oddly shaped. Very large/ heavy, or extremely fragile items, combined shipping is almost always available. Total shipping costs will be based on combined package size and weight. Please feel free to contact me for additional information.
|
|
|
Vintage Set of 4 Brass Wheel Casters Swivel around the Stem
Set of 4 vintage brass wheel casters with brass yokes have swivel posts in good working condition. These casters measure 2.75 inches long including the post. The caster posts are meant to fit inside a socket with 9/32 inch inside diameter 1.5 inches long. They would be used to support a mid weight piece of furniture and raise its height by 1.25 inches. A caster set like this could have been used on a table where the post was inserted into a socket in the leg. The socket could have been metal or just a hole drilled in the wood as sometimes seen on contemporary furniture. Please view the pictures carefully. Ask all questions, request more pictures if needed before bidding as I will only refund in the event that I have grossly misrepresented this item. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13eb1efdd82-0x106-
|
|
|
4 VINTAGE SHEPHERD BRASS/METAL CASTERS:FREE SHIPPING
4 Vintage Shepherd brass/metal casters. They are about 2 1/2" in diameter and the stem is 1 1/2"long. They are marked Shepherd. They have some minor wear/scratches and could use a polish if you want them nice and shiny. Please look at all pictures. Free Shipping/Handling Priority Mail USPS Lower 48 States Only I ship Monday-Friday till 3PM EST. NO SATURDAYS Please do not leave any 1's or 2's on seller rating. If you have any problems contact me and I will solve any problem. Posted with the On Dec-06-12 at 03:27:14 PST. Seller added the following information:
|
|
|
Heavy Cast Brass Drawer Bail Pulls Vintage ? New in Package -- 4 -- Taiwan
Selling 4 really nice heavy cast brass drawer bail pulls. These are new in the package and have all the parts. You will get four packages with one pull in each package. Quality and very well-made. With really ornate designs on both the part that fits against the drawer surface and the bail part- or handle, I don't know what it should be called. Please see photos for condition! If you need more photos or have any questions please feel free to ask and I will be happy to help. Thanks for looking!
|
|
|
Vintage set of 4 solid brass swivel cup casters
zipedit] FANTASTIC set of 4 solid brass swivel cup casters The early 80's[zipedit] Measurement 32mm: Wheel Diameter 26mm:Top of the cup(inside) 22mm:Bottom of the cup(inside) 65mm:Overall height 25:cup height EXCELLENT CONDITION Payment Paypal Accepted Shipping& Handling We Ship goods via the Turkish Post Office with Track Number REGISTERED POST We ship worldwide We ship within 3 days after clearance of the payment. Order(s) are shipped daily Monday to Friday. Tracking number will be given once it's shown in relevant post office's websites. Approximate Delivery Times United States& Canada: 7- 21 Days United Kingdom& Rest of Europe: 7- 15 Days Rest of the World: 12- 21 Days Custom The buyers are responsible for any applicable import duty and local taxes. Please verify with your local customs before purchase. All my ... moreitems are from a non-smoking environment. Check out my! Please check out my other items. Please add me to your! Thanks for looking LORDOFTHE EAST
|
|
|
2 VINTAGE DOOR KNOB GLASS BRASS ANTIQUE DRAWER PULL GREEN BLUE CLEAR AMBER 4.5"
VINTAGE DOOR KNOB GLASS BRASS ANTIQUE GREEN BLUE CLEAR AMBER Size:W 4 cmx L 4.5" Total 2 Pcs. Choose a color you like and send a message to my mail ebay. I will send it to you. Payment I accept ONLY PayPal for payment. The payment is expected within 3 days after the auction ends. Shipping shipping and handling WORLDWIDE. We ship after payment.The package will be shipped directly from Thailand via Standard Airmail within 11-20 business days. RETURN POLICY Satisfaction guarantee: if you are not satisfied with the product you purchased for any reason. Please contact us for a return instruction within 14 days for a refund. Shipping& Handling costs are not refundable. FEEDBACK I leave positive feedback upon payment for the goods and hope that you do the same when you receive them. If there is a problem. Or if you feel that you are not ... morehappy with the goods or the service please contact me before leaving adverse feedback or low star ratings. Thank you Thank you for visiting
|
|
|
SET OF 4 ANTIQUE VINTAGE BRASS ROUND DRAWER PULLS KNOBS-EXC
FOR SALE IS A SET OF 4 ANTIQUE VINTAGE BRASS ROUND DRAWER PULLS OR KNOBS. THE BACKPLATE IS 2" IN DIAMETER. THE KNOB IS 1 5/16" IN DIAMETER. THEY ARE IN VERY GOOD CONDITION. $1.95 IS INCLUDED IN POSTAGE FOR INSURANCE AS A HANDLING CHARGE.
|
|
|
Set 4 Vintage Brass Swivel Casters Furniture Antique
Set of 4 antique brass swivel casters. They are marked on the inside with some letters. KBC then there's a 3 K and a couple more I can't quite make out. Total height 2 1/8 inch. Very good vintage condition, untouched patina. Please take a look at my other auctions. Please ask any and all questions prior to bidding/buying. Payment: Payment is due within 48 hours. If you need more time please contact me. I have no problem waiting till payday or whatever but PLEASE let me know your intentions! Shipping: I keep shipping costs as low as possible and use reused/recycled materials whenever possible. I ship as quickly as I can. There are shipping discounts for multiple items won. Returns: Please contact me with any concerns and we'll try to work something out so that you're a happy satisfied customer. I WILL SHIP INTERNATIONALLY PLEASE ... moreNOTE: All International orders are marked with full purchase price and as merchandise. No exceptions. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. I also from now on will only ship priority mail for international purchase. Way too many lost packages with first class and Ebay won't protect me if I ship first class. Sorry. I know the cost difference but I've lost too much money:
|
|
|
SET 4 Vintage 28.5"H Tapered Wooden Table LEGS PIVOTING brass FEET
SET of 4 Vintage Danish 28.5"Height Wooden table legs Pivoting Brass-Tone Feet Condition: New. Never used before from a smoke/pet free home thanks for looking, please see my other listings
|
|
|
Vintage Mid-Century Modern 4 TABLE LEGS Wood & Brass, Unfinished, 12" Long
Misty Oaks Collectibles Vintage Mid-Century Modern TABLE LEGS For sale is an unopened package of 4 table or stool legs. These 12" wood and brass legs are round and tapered. The package contains 4 legs. 4 2-position top plates, 4 brass plated ferrules or 4 self adjusting levelers, and mounting screws. Please Note Payments Payment is required at time of purchase for Buy-It-Now listings. And within 2 DAYS for Auction-style listings. I only accept PAYPAL as a form of payment. Shipping Shipping costs are actual. I do not add any handling charges. If free shipping is indicated. It is for the lower 48 states only. Extra charges may apply for Hawaii or Alaska. I ship within 2 days of cleared payment. Tracking and Signature Confirmation will be used for shipping. Shipping costs do not include any Import fees or Taxes. Once shipped. The delivery ... moredate is dependent upon the shipping service. Thanks for looking!
|
|
|
Vintage Brass Claw & Ball Furniture Feet -Set of 4 -4" Tall & 3/4" Opening
This is a set of 4 super nice salvaged Ball& Claw feet. They are 4" tall with little wear& good detail& have a 3/4" opening at top.
|
|
|
RARE!!! Set of 4 vintage/ antique brass swirled marble claw feet for table
These are extremely rare! I've only seen ones with clear marbles! You are bidding on a set 4 vintage/ antique handmade marble claw feet for a table. They measure approx 4" tall and the opening for a table leg is 1" The marbles are swirled with a variety of colors in them. One of the marbles is in poor condition and has some cracks in them although it is still in one piece. The other three marbles are in good condition with a few chips and dings in them that you would expect for them from wear and tear over the years. Happy bidding! Paypal only. No international sales, all sales final. Posted with
|
|
|
4 Vintage Wheels Casters Brass & Iron Furniture Dresser Antique Old 1 1/2"
four caster wheels from pianos or furniture. Two have brass wheels and two are iron I think. All have wheels approximately 1 1/2" in diameter. Thanks for looking.
|
|
|
BRASS CASTER BALL'S-----SET of 4----Vintage----BASSICK
I have set of 4 stool legs(caster) all brass-vintage- 3 inch rd. I have not cleaned(up to you) Name(Bassick) All are in great condition. Please look at pic's. This is what you get. Selling as is, because used. Any questions, please ask-thank you
|
|
|
4 VINTAGE BRASS DRAWER FINGER PULLS FURNITURE HARDWARE
4 VINTAGE BRASS DRAWER FINGER PULLS FURNITURE HARDWARE These four solid brass drawer pulls were made c. 1930- 1960 and are approximately 1-3/8" wide x 1-5/8" high x 3/4" deep. They are in very good condition with a pleasing patina! Check out our other antique/vintage furniture hardware in this week's sales and in our store: Maine Antiques Warehouse. Please email for combined shipping. 31247/15/65r) CHECK OUR FEEDBACK AND BID WITH CONFIDENCE! Thanks for your interest in our sales! Please see our other items in this week's auction and be sure to add us to your favorites list. If you don't see what you want. Please email us. We have a very extensive inventory and are adding new items every day. And sign up for our occasional newsletter and email notices of upcoming specials for subscribers only. Payment: We request ... morePayPal for all payments. If this is a problem. Please email us. Payment is due within 3 days. Regretfully. An unpaid item claim will be filed for any invoice not paid within 7 days. If you have a problem, be sure to contact us right away. Shipping& Handling: Shipping charges are extra. Based on actual postage. Please wait for our prompt invoice. We will usually ship within 1 business day of receiving payment. And we will always combine ship multiple items when possible. When you post feedback please remember we are shipping from MAINE and charge the actual USPS rates. So actual postage may be higher than either of us like(especially to the West Coast) but it's out of our hands. INTERNATIONAL BUYERS: We love our International customers. But accept payment by PAYPAL ONLY. International buyers are responsible for knowing all Customs regulations regarding the import of items into their country. NOTE: We will gladly ship USPS First Class International- if possible- but be advised that there is no insurance or tracking available with this service and Seller will not be responsible for any duties. Delays or confiscation. Sorry. We will not falsify Customs forms, so please don&#
|
|
|
Vintage set of 2 brass and metal cup casters 3/4 cup and wheel. Chairs Dressers
Up for auction is a set of two brass and metal casters with cups. The caster and the cup are both 3/4" In great usable shape. I will combine shipping. Most items we sell are vintage so will have some wear from age. Please look at pictures and ask questions if you are not sure of something. Thanks for looking. Check out my other listings. Posted with
|
|
|
Vintage set of 4 Brass Stem Post Casters Wheels 1" inch wheel NOS
This is a Great Vintage Set of 4 Brass 1" Inch Stem or Post Caster Wheels. I am not sure if these are solid brass. I think these are Steel with a brass finish. These are very heavy Duty metal Casters or wheels. These are listed as new Old Stock. These were used at a furniture store from the 1950's- 1970's. These are leftovers that were not used. This is the last set of these I have so don't let them get away. The pictures are part of my description. These are fresh out of a Local Estate Sale. These will make a Great Addition to any collection. Thanks for looking. Email me for any questions. Make sure you check out all of my other Great& Rare Auctions I am listing. I will combine shipping on all of my items when possible. Have a Great Day.
|
|
|
BRASS CASTER WHEELS---SET of 4---Vintage---BASSICK
Set of 4 Bassick Brass stem style caster wheels. These are used and sold"as is" They measure approximately 2 1/2 inches across. All move/turn/rotate freely and seem to be in very good operational condition. Some clean-up is probably required but I will leave them untouched and allow you to decide the look you want.
|
|
|
Lot of 4 Vintage Drawer or Cabinet Drawer Knob Backplates Brass Finished KBC
Lot of 4 Vintage Drawer or Cabinet Drawer Knob Backplates Brass Finished KBC I had an opportunity to go down state Illinois recently for the homecoming of my Alma Mater and shopped the wonderful sales. Barn sales and antique shops along the way. I have a huge variety of oldees for you this week- from 19th century primitives to 1950s kitsch- there’s something for everyone! Here's a nice lot of 4. Small drawer or cabinet drawer backplates for you. They look very much like brass, but I do believe that they are white metal with a nice brass finish. You have to look very closely on the edges, and the inside of the center hole to see any wear. They are all marked KBC on the backside followed by either a 1 or a 2, and then the number, K-11531. Each one measures 6 1/2" long by 3/4" widest and each has a center hole that is 1/4" ... moresquare. Excellent solid and sturdy condition. Aside from the minor finish wear, no issues at all. Please ask if you have any questions. Or feel free to inform me if you have any information about one of my listings. As with any of my items, if you ever need extra pictures, let me know, just make sure that you give me an email address to send them to. Pick up is welcome on all of my items. I’m happy to combine shipments for you, but I do ask that there be no more than 7 days from the purchase of the first item- I will invoice after 7 days, as I cannot hold the items longer than that. Please know that some items cannot be combined, though, due to size or weight and safety of all. Most items set to ship in USPS Priority Mail FLAT RATE boxes, I cannot combine. Also. Many of my items come from local rural estate sales and auctions. They are coming right from the barn or attic to you, dust, cobwebs and all! I do not clean and polish before I sell- they are in the condition found, as you see in my photos- and I leave the patina exactly as it was when I bought the item. I do my best to photo and describe thoroughly. Please email me before bidding if you do not use Paypal. And we can dis
|
|
|
4 Shabby Rusty Vintage Brass Finished Steel Drawer Pulls
4 Shabby Rusty Vintage Brass Finished Steel Drawer Pulls I had an opportunity to go down state Illinois recently for the homecoming of my Alma Mater and shopped the wonderful sales. Barn sales and antique shops along the way. I have a huge variety of oldees for you this week- from 19th century primitives to 1950s kitsch- there’s something for everyone! At first glance. I thought that these old drawer pulls were brass- they have an age darkened patina and peeks of the brass color that you can still see(they're small, but they are there) But then I saw the light surface rust, and indeed, a magnet does stick to them- they are steel, with what's left of their original brass finish. I'm calling them shabby in my title because of that. They are in excellent solid and sturdy condition structurally, and will come with the screws that ... moreyou see inside of each one at the back. It's a matching set of 4, each measuring 3" wide by 2 1/2" tall, and the screw holes at the back are 2 1/2" apart. All have their original swinging handle. They are dirty, and could use a good cleaning. The rust is surface only, with no sharp edges or eat throughs. As little clean up, a little finish, or leave them primitive as they are- you can't go wrong! Please ask if you have any questions. Or feel free to inform me if you have any information about one of my listings. As with any of my items, if you ever need extra pictures, let me know, just make sure that you give me an email address to send them to. Pick up is welcome on all of my items. I’m happy to combine shipments for you, but I do ask that there be no more than 7 days from the purchase of the first item- I will invoice after 7 days, as I cannot hold the items longer than that. Please know that some items cannot be combined, though, due to size or weight and safety of all. Most items set to ship in USPS Priority Mail FLAT RATE boxes, I cannot combine. Also. Many of my items come from local rural estate sales and auctions. They are coming right from the bar
|
|
|
Set Of 4 Vintage Tapered Wood Leg W/ Brass Tips Furniture Salvage Part Parts 5"
Set Of 4 Vintage Tapered Wood Leg W/ Brass Tips Furniture Salvage Part Parts 5" Salvaged furniture parts.Set of 4. Matching. Wood part of leg is approximately 5" tall. The screw on top is 1-3/4" long and about 1/4" thick. The leg is tapered. it is just under 2" wide at the top, bottom is about 3/4" across. Great for project or repair. Vintage. Has brass tip on the bottom. Sold As-Is. I am not sure what type of wood? Please check out the pictures. They are the best description. I don't know a lot about this, but will be happy to answer any questions you may have. CHECK OUT MY E-BAY STORE! I do combine shipping. When possible. Check out my! Be sure to add me to your!
|
|
|
Vintage set of 4 Solid Brass Stem Post Casters Wheels 1.5" inch wheel
This is a Great Vintage Set of 4 Solid Brass 1.5" Inch Stem or Post Style Caster Wheels. These are solid Brass. These are Very Heavy Duty Casters or Wheels. I am not sure what these were used for. The wheels measure about 1 1/2 inches tall. 4 1/2 inches in circumference, 1 inch wide. These are missing the stem posts but I am sure these can still be used. The pictures are part of my description. These are fresh out of a Local Estate Sale. These will make a Great Addition to any collection. Thanks for looking. Email me for any questions. Make sure you check out all of my other Great& Rare Auctions I am listing. I will combine shipping on all of my items when possible. Have a Great Day. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-141fbfbdfaf-0x108-
|
|
|
4 Vintage Legs with Brass Hoof Feet
8-9-13(15) This is a nice set of 4 matching short legs with cast brass hoofed feet. The brass is in good condition. These came off of table. The wood is fruitwood. 10" High X 2" Wide X 3.5" Deep Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
7 vintage duncan phyfe brass claw feet toe caps 3 of one style 4 of another
Vintage Duncan Phyfe toe caps. 3 of one style off of a 3 legged round table and 4 of another style off of a 4 legged rectangle table. BUY IT NOW! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1420646d5fb-0x106-
|
|
|
Set of 4 Vintage victorian brass loop drawer handle, antique hardware
Here we have a set of 4 Victorian drawer loop pull knobs. In good condition, i also have an extra one that loop is seperated(easy fix) that can be kept as extra parts or 5th knob. Loops are a little over 1.5 inches in diameter. All brass except screw. Normal 0 21 I live in Canada. If you live in the USA, your item must go through Security at the border, sometimes there is a backlog, Unfortunately I have no control over this event. Please take this information into consideration when bidding on my lots. search. But I am by no means an expert. If there is something I may have missed or I do my best to note all defects and I also try to give the best description possible. If you have any questions. Please don't hesitate to ask and I will be happy to answer as best as I can. I will be glad to combine shipping if you purchase multiple items. ... moreWhat you see in the picture is exactly what you will receive. Thanks for your interest and good luck
|
|
|
Set of 4 Vintage Brass Scroll Design Furniture Appliques / Trim / Adornment
Set of 4 Vintage Brass Scroll Design Furniture Appliques 6 1/2" x 3 3/8" 4.34 oz. ea. 3 mounting holes numbered on back N 2609 nice patina excellent condition.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-142094a7787-0xfb-
|
|
|
Vintage 4 Glass Ball Claws Piano Stool Feet Eagle Talon Brass Color !
Vintage 4 Glass Ball Claws Piano Stool Feet Eagle Talon Brass Color! Item: We have 4 neat vintage Eagle Claws Furniture Feet. The Claws have glass balls and are used on piano stools. There are great details showing talons on the Eagles Feet. And the Claws were originally brass in color. A perfect addition to any piano stool! More neat stuff in our Ebay store! Size and Makeup: Claw Feet: approx. 4” Tall. 1” across bottom of glass ball. The inside opening is 7/8” Made of metal. Glass. Condition: The Glass Ball Feet: The glass balls have some surface chips and some dings from use(nothing serious) But are structurally solid! Otherwise looks good! Markings: None. SUPER pieces for any collector! Great pieces to use or display! We usually have other exciting items listed. Please check our other auctions! New items being listed daily in our store! ... moreFeel free to email any questions! Shipping: Buyer pays Priority shipping cost from zip code 13212(continental US) Package weight is about 3 pounds. NY residents must pay 8% sales tax. We will ship internationally. But please be aware of the high price to ship overseas. Any Questions please email us for a price. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|
Vintage set of 4 brass metal caster 1 1/4-1 3/4 " Tall cup/wheel chair dresser
Up for auction is a set of four brass and metal casters(2) with cups. The caster with the cup are both 1 3/4" each. Without is 1/4" tall Good used condition. The cups are in fair condition, the one cup has a broken rim, see pictures. Thanks for looking! Check out our other great listings.
|
|
|
Vintage lot 4 brass metal furniture dresser drawer hardware pulls
Up for auction are these beautiful vintage drawer pulls. The set of 4 have the original patina. The handle portion is made of brass and the back plate is made of some ferrous material. The pieces do not appear to be signed. The pieces measure 3 5.8 X 7/8 inches with 3 inches between the screw holes. One of the plates has an area of rust on the plate portion. Please check out additional vintage hardware and jewelry I have so for sale from the same estate. Please feel free to to email me with further questions or for additional pictures. Return policy: Payment is to be received within 10 days of end of auction. All items are sold"AS IS" Many of my items are vintage. And I describe them to the best of my ability. These vintage items may have minor imperfections due to age or wear. Please consider that imperfections do not necessarily ... moreequate damage. I charge a $1.00 handling fee to pay for shipping supplies. I will combine shipping on most small items, feel free to email me regarding combined shipping options. Paypal is preferred, but I will accept personal checks. The item will be sent when payment is cleared. Please ask questions before you bid. If you are unsatisfied with the item upon arrival, please contact me before leaving negative feedback. Thank you and happy bidding!
|
|
|
A Pair Vintage Ornate Brass Furniture Decor # 30 - 4 inches
For sale a pair vintage ornate brass furniture decor. Please ask questions before making a bid or buying this item. Any offers are welcome. Please read our policies. No return accepted for this item. SIZE APPROXIMATELY: Toll- 4 inches. Wide- 3.5 inches, Weight- 0.26 lbs. PLEASE READ OUR POLICY: TO BE ACCURATE AS POSSIBLE WE PROVIDE ENOUGH PHOTOGRAPHS TO ALLOW THE BUYER TO MAKE THEIR OWN JUDGEMENT. ANY DEFECTS NOT MENTIONED BUT VISIBLE IN THE PICTURES WILL BE CONSIDERED AS DESCRIBED. POSSIBLE QUALITY VERY MINOR PROFESSIONAL RESTORATION. ALTHOUGH EVERY EFFORT IS MADE TO ENSURE ACCURATE DIMENSIONS AND WEIGHTS THE FIGURINE OR OTHERS ITEMS SHOWN ALWAYS BE TREATED AS APPROXIMATE. PLEASE NOTE: WE CAN SHIP ONLY TO YOUR REGISTERED PAY PAL ADDRESS.THE ONE THAT ACCOMPANIES YOUR PAYPAL PAYMENT.SELLER ACCEPTS NO RESPONSIBILITY FOR SHIPPING ERRORS TO INCORRECT ... moreSHIPPING ADDRESSES, CUSTOM DELAY, CUSTOM CHARGES(please check with your country's customs office to determine what these additional costs will be prior to bidding/buying) BUYERS ARE RESPONSIBLE FOR ANY DESTINATION CHARGES, CUSTOM DUTY OR INSPECTION FEES(please make sure that items purchased are legal for import into your country) PLEASE CONTACT US WITH ANY QUESTIONS OR OFFERS.
|
|
|
2 Vintage Decorative Brass Furniture Door Drawer Handles # 96 - 4.5 x 2 inches
For sale a pair vintage decorative brass furniture door drawer handles. Please ask questions before making a bid or buying this item. Any offers are welcome. Please read our policies. No return accepted for this item. SIZE APPROXIMATELY: Toll- 4.5 inches. Wide- 2 inches, Weight- 0.8 lbs. PLEASE READ OUR POLICY: TO BE ACCURATE AS POSSIBLE WE PROVIDE ENOUGH PHOTOGRAPHS TO ALLOW THE BUYER TO MAKE THEIR OWN JUDGEMENT. ANY DEFECTS NOT MENTIONED BUT VISIBLE IN THE PICTURES WILL BE CONSIDERED AS DESCRIBED. POSSIBLE QUALITY VERY MINOR PROFESSIONAL RESTORATION. ALTHOUGH EVERY EFFORT IS MADE TO ENSURE ACCURATE DIMENSIONS AND WEIGHTS THE FIGURINE OR OTHERS ITEMS SHOWN ALWAYS BE TREATED AS APPROXIMATE. PLEASE NOTE: WE CAN SHIP ONLY TO YOUR REGISTERED PAY PAL ADDRESS.THE ONE THAT ACCOMPANIES YOUR PAYPAL PAYMENT.SELLER ACCEPTS NO RESPONSIBILITY FOR SHIPPING ... moreERRORS TO INCORRECT SHIPPING ADDRESSES, CUSTOM DELAY, CUSTOM CHARGES(please check with your country's customs office to determine what these additional costs will be prior to bidding/buying) BUYERS ARE RESPONSIBLE FOR ANY DESTINATION CHARGES, CUSTOM DUTY OR INSPECTION FEES(please make sure that items purchased are legal for import into your country) PLEASE CONTACT US WITH ANY QUESTIONS OR OFFERS.
|
|
|
Vintage Lot of 4 Wooden Wheel Casters with Brass
Four Vintage Antique Wooden Wheel Casters with Brass. Wheels measure 1 1/8" inch. Stem measures 1 1/4" Stamped on back Patented May 20.73. One of the wooden wheels has a flat spot, a little out of round. Looks like it would raise your furniture about 1 1/2" total. All wheels in good working order except for the flat one. All wheels Spin freely. Bracket that holds the wheel are brass, and the stem are steel/cast. These are well over 100 yrs old.
|
|
|
Antique Hardware Vintage Drawer Brass Pull Swan Neck Bail Pull 4" on center
Gorgeous antique drawer pull.you will love these world class pulls This is the Mercedes Benz of hardware.I have dealt with thousands of pieces of hardware 7 these are top of the line Perfect for use with Federal. Duncan Phyfe, Chippendale, Early American& Colonial styles to name a few Sold individually*10 available Very high quality heavy weight solid brass castings Perfect for antique or vintage projects These were on a chest of drawers made by"Kindel" Incredible naturally aged patina which took over 80 years to develop.the brass has beautiful darkened areas which look bronze as well as antique brass areas.a beautiful combination as you can easily see in the photos In the last photo I show 3 different handles so you can easily get an idea of the unique patinas.each order includes only 1 handle not 3 Circa 1920's-30's ... moreOutstanding antique condition.each pull has a unique patina/look The handles are secure& swivel great A nice feature is the post where the handle end inserts is cast as one with the back plate.that makes for a very strong post& secure the handle beautifully.this is a high quality detail The handles have built in stops on the back side so the handle does not bang the drawer front Proudly made in the USA by the world famous Keeler Brass Company.Keeler has had a reputation for making very high quality hardware for decades. Their hardware is found on some of the finest furniture I will include the original mounting screws which fit with a 3/4" thick drawer front.if you need mounting screws for a different thickness project just email a note upon checkout or call me and advise me the thickness of your project.I will include the correct length screws to fit your project thickness.perhaps saving you a trip to the hardware store The handle has"K7632" cast into the back side The back plate/rosette has"F457" cast into the back side The back plate has a small point cast into the back which helps secure it in place when it bites into the wood. The back plat
|
|
|
vintage polished brass furniture salvage hardware cabinet drawer pulls set 4
nice set of 4 brass pulls salvaged hardware
|
|
|
4 VINTAGE BRASS SWIVEL CASTERS - Machine Age Steampunk Industrial
This is a very nice set of 4 vintage brass casters that swivel. They measure aprox. 1 3/4" high x 3/4" inside and are in good condition. We will gladly combine lots whenever possible to save on shipping costs.
|
|
|
LOT OF 4 MATCHING BRASS VINTAGE ANTIQUE DRESSER PULLS HARDWARE STEAMPUNK
HERE IS A NICE SET OF FOUR ORNATE BRASS PULLS/HANDLES WHICH ARE PART OF MY COLLECTION OF 30 YEARS IN THE FURNITURE REFINISHING BUSINESS. THEY MEASURE 2 1/2" WIDE AND ARE MARKED ON THE BACK- H602. PLEASE LOOK AT THE PICTURES AND ASK ALL QUESTIONS BEFORE THE AUCTION ENDS. PLEASE SEE MY OTHER LISTINGS FOR FURNITURE PARTS AND I WILL BE GLAD TO COMBINE SHIPPING. I SHIP ONLY TO THE LOWER 48 STATES IN THE USA AND REQUEST PAYPAL PAYMENT WITHIN THREE DAYS OF THE END OF THE AUCTION. THANKS FOR LOOKING AND GOOD LUCK. Posted with
|
|
|
4 Brass Drawer Pulls Vintage ANTIQUE Handles Knobs Salvage Restoration Parts F8
4 Brass Drawer Pulls Vintage ANTIQUE Handles Knobs Salvage Restoration Parts F8 Please ask if you have any questions! International shipping: While we offer international shipping. Please contact us first to confirm- we do not ship to some countries, and some items are just too heavy to ship overseas! Payment is required within 7 days of auction ending. After 7 days. An unpaid bidder case will automatically open, and cancel the transaction. Items ending up to 7 days apart can apply the combined shipping discount. If this is the case, payment for the oldest item must still be recieved within 7 days. Please note: eBay will AUTOMATICALLY issue an unpaid buyer case after 7 days of non-payment. Invoices are sent in groups of 20 items; once this number has been hit in one invoice. We require payment before further bidding. Mail will usually take ... morebetween 7 and 10 days. Thank you once more for your bid! DUE TO AN EBAY INVOICE LIMIT OF 40 ITEMS. IF YOU WIN OVER 40 ITEMS, WE WILL SEND AN ADDITIONAL INVOICE. gsrx_vers_526(GS 6.6.6(526) 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-143f0b66ee0-0xd0-
|
|
|
Vintage 10" Wooden Tapered / Pencil Legs With Brass Caps And Brackets- Set Of 4
FOR SALE VINTAGE 10 INCH TAPERED/ PENCIL LEGS WITH BRASS CAPS AND BRACKETS AND SCREWS.IN GOOD CONDITION SOME MINOR WEAR BUT NOTHING A LITTLE OIL WONT FIX,THE BRACKETS MEASURE 2 3/4 INCHES LONG,2 1/4 INCHES WIDE,AND LEGS ARE 10 INCHES TALL,NOT SURE ON WOOD TYPE,PLEASE SEE ALL PICTURES FOR MORE DETAIL ON CONDITION.
|
|
|
4 Old Vintage Solid Fancy Brass Hardware Pieces Table Corner Pediments ?
4 Old Vintage Solid Fancy Brass Hardware Pieces Table Corner Pediments? I brought home a truck load of items from the auction last week. It was a farm estate. And I found some fabulous primitive antiques, as well as boxes and boxes of antique and vintage hardware that I will be listing for a long long time- someone clearly was a woodworker or dabbled in furniture creation or restoration. There’s something for everyone! I love these 4 pieces- but I'm not quite sure what they are! They came together. So I'm assuming they belong together- and they certainly have the same fancy style. There's two large and two small and each has a curve that makes me wonder- are they corner pediments for a table? See my photos and see what you think. Theeir shapes are not a 90 degree angle, so if they were on legs, they would have had to have been ... morelegs that are curved- not that they don't"wrap" to either side of a corner, it's just that they wouldn't be flush with the leg of a corner- there would be some air space. They are old vintage, if not antique, and they are either solid brass or bronze- one or the other as a magnet does not stick to them. I'm leaning toward brass because of the gold color that shines through the dark patina. The smaller pieces are darker than the larger pieces, but you can see the peeks of the gold brass color on the edges and at the back. All of the pieces have an age darkened patina accented with green oxidation, especially at the backs. If you look closely in photo 9 at the piece on the left, you can see that this piece has two drops(one about 2" and one about 1" one on either side) and a dot of a hard substance that has a green hue to it. It's hard, and feels and looks like dried adhesive- but it could be a dried varnish or even something else, I really don't know. I didn't try to remove it, as I didn't want to mess with the patina, but I want you to know it's there- see my photos. Other than this, they are in excellent condition. The two
|
|
|
Vintage set of 4 brass caster wheels mid century style Shepard-heavy!
Vintage set of 4 brass caster wheels mid century style Shepard-heavy! Great for restoration/repurpose
|
|
|
4 VINTAGE BRASS ORNATE LION HEAD/FEET STAND LEGS, 10.5"
I do not no what these legs were for I found them at an estate sale They are Heavy Brass with a nickel? Plate. they are 10.5" long 2" wide at top. about 1/4" thick wgt over 1 lb each there are 3 mount/screw holes on the lion head the base has one threaded hole on the back of the feet does not go thru there are no mfg numbers or names Very Nice detail. Ship usa 11.35.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1440ffda43c-0xfb-
|
|
|
SET OF 4 ANTIQUE VINTAGE BRASS OR CAST IRON LAMP PARTS OR FURNITURE FEET LEGS
Up for auction is this set of 4 lamp parts or furniture feet or legs. They are real nice. They are 5 1/2 in x 4 1/2 in. if you have any questions feel free to ask. Thank you for looking
|
|
|
4 Mid Century Modern - Danish - Vintage Wooden Table Legs 14 1/2" LONG, BRASS
NICE SET OF END TABLE LEGS FROM AN END TABLE FROM THE ATOMIC ERA. LATE 50'S. THEY ARE 14 1/2" LONG. PLEASE USE MAGNIFIER FOR MEASUREMENTS ON PHOTOS. THANK YOU FOR LOOKING
|
|
|
Set 4 Vintage Danish Modern Eames Era Mid-Century Furniture Legs w/ Brass Caps
Set of 4 Danish Modern Mid-Century Legs Perfect for a coffee table. Credenza, nightstand, footstool, etc. There is a plate attached for easy screw-on. These are in good vintage condition- some normal wear and tear, scratches, etc. I've detailed the worst of it in the photos. These could be cleaned up and refinished very well, or left as is. I've just wiped them down. Legs are 10 inches long end to end. With an angled plate attached. I have 12 of these legs total. This auction is for 4. If you are interested in purchasing all 12. Message me. Check out my! All of my items come from a very clean smoke-free home. I will ship your item within two business days of receiving payment. Please pay via PayPal within 5 days of the end of the auction. Feel free to ask any questions or for more photos(be specific) I will respond as soon as I can!
|
|
|
Vintage Antique Brass Eagle Claw Glass Ball Legs Set Of 4 - Ornate/Steampunk
Set of 4 extremely detailed brass table or piano stool eagle claw legs with glass balls. These measure 41/2" in height. Surface condition is excellent with a nice warm brass patina(all original) There are some small fleabites on the glass balls but in no way do they detract from their beauty. Check out all the other claw listings- this is a great set by any standard. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1443dccb1c9-0xf3-
|
|
|
Lot of Vintage Brass Hardware Drawer Pulls,Knobs,and 4 Claw,Paw Feet
Lot of Brass Hardware Drawer Pulls.Knobs and 4 Claw,Paw Feet The 2 shiny brass drawer pulls measure 3" between screw holes.The tarnished squared off pull measures 3 1/2" between holes 6 brass knobs 3 match 3 don't The 4 claw.Paw feet measure 1 1/4" inside at the narrowest point, 2 1/4" long at longest point Dust.Dirt,scuffing,tarnish,corrosion
|
|
|
SET OF 4 VINTAGE EGYPTIAN PHARAOH STYLE BRASS FURNITURE MEDALLIONS
This is a very nice set of 4 brass medallions from a vintage piece of furniture. They measure 2 1/4" in diameter and are in good condition. We will gladly combine lots whenever possible to save on shipping costs.
|
|
|
ANTIQUE - VINTAGE SET of 4 BRASS or CAST IRON FURNITURE FEET LEGS - UNIQUE
Up for auction is these set of 4 Antique Brass- Cast iron Furniture Feet- Legs. They are real Unique and in great condition. They are 3 1/2" long by 1 1/2" to 1 3/4" wide. Please email with any questions. Good luck bidding. Check out my other collectible estate auction items. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1445a41f5cf-0x107-
|
|
|
4 VINTAGE BRASS SWIVEL CASTERS - Machine Age Steampunk Industrial Daisy No 5
4 vintage matching set of swivel Daisy No 5 castors. About 2 inches tall. Wheels are plastic. They do have starches and some rust. All swivels and wheels working and move freely. Please fell free to ask any question. See pictures for more details. US Shipping Only. No Returns. Posted with
|
|
|
Set of 4 Vintage Shepherd 2-1/2" Brass Furniture Casters
For Sale: Set of 4 Vintage Shepherd Brass Furniture Casters The pictures shown are of the actual items up for auction. These items are used. Please read the condition description before bidding on these items. The distance between the mounting holes is 1" on center. These casters are made of heavy brass. Each caster weighs about 10.7 oz. The overall height of each caster is about 2-3/4" That was measured from the bottom of the wheel up to the square mounting plate. Overall wheel size is about 2-1/2" That was measured from the widest point on the wheel. Please contact me if you have any questions. Thanks for looking at my auction. Happy Bidding!
|
|
|
VINTAGE - BRASS SWIVEL CASTERS - MID CENTURY - NEW/OLD STOCK - SET OF 4 - NEW
VINTAGE- BRASS SWIVEL CASTERS NEW/OLD STOCK MID CENTURY SET OF 4 NEW PART OF HARDWARE ESTATE FIND- MANY OTHER ITEMS AVAILABLE THANKS FOR LOOKING! DIANE Posted with
|
|
|
4 LARGE HEAVY BRASS KNOBS VINTAGE ANTIQUE PULLS HARDWARE STEAMPUNK
HERE ARE 4 LARGE HEAVY( 3/4 LB. TOTAL WEIGHT FOR ALL 4) ANTIQUE BRASS KNOBS WITH 2 BACK PLATES WHICH ARE PART OF MY COLLECTION OF 30 YEARS IN THE FURNITURE REFINISHING BUSINESS.THE KNOBS MEASURE 1 3/4" IN DIAMETER. PLEASE NOTE THAT THERE ARE ONLY 2 BACK PLATES! I HAVE NOT ATTEMPTED TO CLEAN OR POLISH THEM.PLEASE LOOK AT THE PICTURES AND ASK ALL QUESTIONS BEFORE THE AUCTION ENDS. PLEASE SEE MY OTHER LISTINGS FOR FURNITURE PARTS AND I WILL BE GLAD TO COMBINE SHIPPING. I SHIP ONLY TO THE LOWER 48 STATES IN THE USA AND REQUEST PAYPAL PAYMENT WITHIN THREE DAYS OF THE END OF THE AUCTION. THANKS FOR LOOKING AND GOOD LUCK. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-144aa17f35d-0x105-
|
|
|
VINTAGE ALL BRASS CUP WHEEL CASTERS 3 1/8" Tall Set of 4
You are bidding on a Vintage Antique ALL BRASS CUP WHEEL CASTERS 3 1/8" Tall. 1 1/2" Top Diameter. But gets smaller as you go lower. Wheels just over 1 1/4" in diameter. Set of 4. Very Sturdy. Needs good cleaning. please see pics. I do not set my cameras date every time I use it, Date may appear old,but all pictures are taken just before I post) Please note that I am not an expert on my items for sale, I research the item and do my best to describe each item accurately. Any descriptions I give indicating the condition of item(s) as excellent, very good, good, and poor or levels of functioning are purely subjective to what I observe, test and think of the item. I try to be as accurate as possible. But it is only my opinion and should in no way be considered as an appraisal value. Once again, Please see pics to help you determine ... morecondition. I will combine shipping on multiple items won( within reason) when possible. In most cases. Shipping for smaller items will be USPS parcel/economy. Sometimes there is a minimal difference in shipping upgrades,if so I will choose the upgrade. Larger items will be shipped FedEx. Local pick-up ALWAYS( 06062) available. Please submit to me any questions you may have prior to bidding. When applicable, International shipping may be extra. I will always do my best in insuring your package arrives safely. I will always leave feedback after it is left for me. Thank you for looking and good luck bidding. Bob
|
|
|
4-Vintage Brass Coated ROCKFORD Metal Furniture /Cart Caster Wheels Hardware Set
You are looking at 4 old used metal wheels.Wheels are in good condition.May have a little rust on them. Wheels and shaft size is.3' long.Wheel is 1'2/16 wide.10/16 thick.has a.ROCKFORD 4.on it.Brass coated PLEASE LOOK AT PICTURES CLOSELY FOR CONDITION OF WHEELS.Pictures will tell you more about condition. PLEASE FEEL FREE TO ASK QUESTIONS.Wheels are in good usable condition PAYMENT THROUGH PAYPAL ONLY.WHEN PAYMENT RECEIVED IN PAYPAL.NEXT DAY SHIPPED WITH DELIVERY CONFIMATION.PAYMENT WITH IN 4 DAY.PLEASE.THANK YOU FOR LOOKING
|
|
|
Pair Lot of 2 Small Vintage 3/4" BRASS furniture KNOBS PULLS
Lot of 2 vintage brass 3/4" knob pulls for furniture/cupboard. Please browse my store. Jan's Junktiques, for more hardware choices. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-144ef96b89c-0x111-
|
|
|
Vintage Brass or Bronze Square Leg Toe Cap Casters 3/4" Lot of Four
Lot of four vintage 3/4" square toe cap casters. Wheels 13/16" diameter by 1/2" wide. Very fine condition.
|
|
|
brass CLAW FEET furniture Rough condition OLD smaller size 4 vintage junk drawer
HELLO and thanks for looking. Here are four brass furniture CLAW FEET. These are very old but a few are bent out of shape. Also two have a ball type insert but the other two it is missing. These would be for a pretty small piece of furniture as they only measure 1 1/4 x 3/4" wide. Please see pictures for better description. Being sold“as is” so please be careful when bidding. Best to ask questions as soon as possible. Please let me know if you’re paying with something other than paypal. Payments should be made within 3 days or other arrangements made. Shipping price quoted for the 48 states only. If you don't mind I will open an unpaid item case after three invoices. Sorry. Don't have a"lay-away" policy. THANKS for understanding. Everything will be packaged well but I can’t be held responsible for how the post office ... morehandle packages. Multiple purchases get a VERY fair shipping discount. You have my promise that I’ll make this as easy as possible and to make you 100% happy with the transaction. IF something is to go wrong all I ask is that we can resolve it. Feedback is given after feedback is received(I can only go back 60 days) THANKS AGAIN… STEVE KIMBERLEY Santa Rosa Beach. Fl. 32459
|
|
|
SET OF 4 VINTAGE HEAVY BRASS CLAW FEET FURNITURE CASTERS DUNCAN PHYFE STYLE
This is a very nice set of 4 vintage solid brass casters with claw feet. They are the type typically used with Duncan Phyfe style legs. They measure aprox. 1 3/4" wide x 2" deep x 3" high and are in good condition. Square opening is 1-1/16" x 1-1/16" Posted with
|
|
|
SEVEN Vintage Shepherd style 2-1/4" Brass Furniture Casters
SEVEN Vintage Shepherd style 2-1/4" Brass Furniture Casters All used. All very usable. All with some type of wear. Roll freely. They don't look new but work as new. Four matched. Very strong. 2 matched. Not as strong. One Shepherd brand with stem. 4" overall. 1 1/4" stem. Please ask questions you may have and see the pictures for more detail.
|
|
|
4 Vintage Bakelite BRASS Armstrong Cork Company Feet LEGS Table Chair PIVOTING
4 Vintage Bakelite BRASS PIVOTING LEGS REPLACEMENT Casters Armstrong Cork Company Feet for Tables Chairs. FEET ARE IN GOOD USED CONDITION. HAVE SOME RUST, SCRATCHES AND WEAR FROM USE. TABLE LEGS FEET HAVE NOT BEEN CLEANED. item no. 900. FEET MEASURE 2 1/2' T X 1 1/8' IN DIAMETER AT BASE. PLEASE SEE PICTURES FOR DETAILS. WE DO NOT ACCEPT RETURNS AND ONLY SHIP TO THE 48 CONTINENTAL STATES. THANK YOU FOR LOOKING!
|
|
|
Set of 4 Vintage Wood Brass Tapered Table Stool Legs with Mounting Plates
Set of 4 Vintage Wood Brass Tapered Table Stool Legs with Mounting Plates- These are in very nice condition. Found stored in an attic. They don't really even look used, just have some signs of aging from the years. They measure 10 5/8" in length and have a diameter of 1 11/16" They have a nice look to them and would be great for finishing or restoring a vintage accent piece. They come with the mounting plates too. These measure 5 5/8" x 3 1/4" Box 7443.4
|
|
|
4 VINTAGE/ANTIQUE CLAW FEET FURNUTURE END CAPS BRASS TABLE SALVAGE 1" X 1 1/4"
Each is 1 1/4" wide at back outside 1 3/16" deep 1" high outside 13/16" high inside Set of 4 Posted with
|
|
|
Set of 4 Vintage Antique Solid Brass Wheel Coasters Furniture Legs
You are bidding on a set of 4 Vintage Antique Solid Brass Wheel Coasters Furniture Legs.Each one measures 3 inches long from top to bottom of wheel.Nice condition as my pictures show.USA buyers only.Add $6.00 postage.
|
|
|
4 pcs Vintage Used Porcelain & Brass Casters Wheels 1" Porcelain Casters*
4 pcs Vintage Used Porcelain& Metal Casters Wheels 1" Porcelain Casters* small wheel about 1" neat set 2 round 2 square see photo Posted with
|
|
|
Set 4 Four Table Legs Vintage 14" Long Mid Century Tapered Blond Brass Tips
Offered is a set of 4 vintage Mid Century Modern tapered pencil legs. In a light colored/ blond finish with nice grain to the wood. Wood looks like pine. The legs measure 14 inches long as pictured. The tips measure 3/4 inches across and the top is 1 7/8 across. The brass tips are age faded/ worn as pictured. No brackets. Legs only. Also. See my other listings for more great vintage Mid Century legs I am listing today, if these are not what you need another set may be or if you need more than one set I will combine listings to reduce shipping costs. See enlarged/ zoom pictures for visual details as they are part of the description. Though unlikely if an item is damaged in shipping we do NOT accept returns. They are FULLY insured and the USPS will direct you where to return an item. I will file your claim for you and take care of all the paperwork. ... moreYou will simply need to provide me with a picture of the damage and retain the item, packing and original box for the USPS until they tell you what to do with it.
|
|
|
Lot of 4 Vintage Ornate Antique Brass Hinges plus One smaller Hinge
On offer; a lot of 4 large and one slightly smaller ornate brass hinges. The hinges have nicle plating that is flaking off. I try to accurately and fairly describe the condition of items I sell. But I am not an expert. If after reviewing the pictures you have any questions or comments concerning the condition of the item, please contact me prior to bidding. If you purchase multiple items, I will gladly combine them to reduce shipping if possible.
|
|
|
Lot of 2 Small flower floral Vintage BRASS 1 1/4" furniture cabinet KNOB PULLS
Lot of 2 vintage brass over metal 1 1/4" knob pulls for furniture/cupboard. Pretty flower pattern. Though the center of one is pushed in. Used with scratches/wear to the metal. Please browse my store. Jan's Junktiques, for more hardware choices.
|
|
|
SET OF 4 VINTAGE NICKEL PLATED BRASS ICE BOX CORNERS HARDWARE
This is a set of 4 vintage ice box corners or hardware. They measure aprox. 1 3/4" from the corner too the outside edge and are 1 1/4" high in the center. The nickel plating is somewhat worn or scratched. We also have some other ice box hardware presently listed. We will gladly combine lots whenever possible to save on shipping costs.
|
|
|
Whackymuseum 4 Brass Furniture Hardware Mount Handles Vintage
WHACKYMUSEUM 4 Brass or Bronze Hardware- Handles? condition- good. Refer to photos. measurement- approximately 3.75" x 3.0" x 0.25" PLEASE TAKE A LOOK AT MY OTHER WHACKY ITEMS FOR SALE ON EBAY. I COMBINE SHIPPING ON MULTIPLE PURCHASES. When purchasing multiple items. Please request an invoice before paying so that I can give you a combined shipping discount. International buyers- Shipping is by first class mail. This does not include tracking and insurance.
|
|
|
VINTAGE BRASS AND OAK CLAW FEET SET OF FOUR [4] NR
Up for bid In as found used good condition is a set of 4 brass and oak claw feet 4" in high 7/8" receiving hole top of taper Ball 1-1/4" diameter.I will let pictures say the rest.Please feel free to ask questions. If item is not as described return and a refund will be issued. International bidders must contact us before bidding THANKS FOR BIDDING
|
|
|
Set of 4 Vintage BRASS LION Claw/Paw Feet Leg Cap LQQK! 1 X 1/4 "
UP FOR BID IS 4 VINTAGE BRASS? CLAW FURNITURE FEET. THEY MEASURE APPROX. 1 INS WIDE X 1 1/4 INS. LONG. THEY ARE SLIGHTLY RUSTY SO THEY WILL NEED TO BE CLEANED OR PAINTED. PLEASE CHECK OUT MY OTHER LISTINGS. I COMBINE SHIPPING. THANKS FOR LOOKING.
|
|
|
4 Vintage Brass Claw Foot Plate Covers for Furniture Legs
4 Vintage Brass Claw Foot Plate Covers for Furniture Legs As seen in pictures below. We have a set of 4 old brass claw foot furniture leg covers. There are no markings on these pieces. They are in good shape, with some tarnishing and patina. There is some slight bends on a couple, thus a slight variation in the sizes of them. Basically they measure 1-1/8 inches tall, 1-1/4 inches across, and 1-1/8 inches tall on the back side. Still a nice set to use, or add to any collection. Shipping will be $3.50. Thanks for looking. TERMS of SALE END of ITEM We will send you an invoice through eBay with shipping charges within 24 hours after item has ended. Unless Buy-it-Now is used. PAYMENT PAYPAL ONLY SHIPPING Your item will be shipped within 1 Business day of payment. Powered by The free listing tool. List your items fast and easy and manage your active ... moreitems.
|
|
|
4.5+ Lbs 50+ Piece Lot Vintage Hardware Brass Iron Hinges Pulls Handles Hangers
4.5+ Lbs 50+ Piece Lot Vintage Hardware Brass Iron Hinges Pulls Handles Hangers Miscellaneous Etc. Items are as pictured. Varying age and condition, pulled from my dad's garage. A furniture makers mix and match. These items do add up if purchased individually. Most of the items appear to be brass, weight is shy of 5 lbs. Good Luck Already packaged and ready to ship next day
|
|
|
Antique Vintage Brass Lions Claw/Paw Feet Leg Cap Set of 4
Hello been a while since I have been able to list computer problems but now I'm back so here are some items that I found at an estate sale maybe I have something you may want or need. Up for your bidding consideration I have this Vintage Antique Set of 4 Brass Lions Claw/Paw feet Leg Caps. They are in good condition but need cleaned I did not want to take off the patina they are as I found them, they measure 2 3/4" long 1 5/8" wide and 1 1/4" tall. If you have any questions please feel free to send me an email and I will answer the best I can. I try to ship multiply orders whenever possible and I do ship Internationally, when bidding from outside the US please check the shipping costs, my method of payment is through Paypal, so good luck with all you bidding and have a great Summer
|
|
|
SET OF 4 VINTAGE MODERN TAPERED TABLE LEGS, BRASS FEET SWIVEL15 1/4" LONG CRAFTS
SET OF 4 MODERN TABLE LEGS BRASS PLAT SLEEVES& FEET FEET SWIVEL 15 1/4" LONG 1 3/4" DIAMETER AT TOP 1/4" THREADED ON END PLASTIC BOTTOMS SO NOT TO SCRATCH FLOOR SOLD FOR PARTS we ship fed ex. no po boxes
|
|
|
(4) VINTAGE/ANTIQUE Metal Brass? Caster Set Furniture Parts - Good Shape
Lot of 4 Antique Metal/Brass( Casters Condition: They are in Used Good Condition being free from any major problems. There is rusting on different parts of the casters but each spins perfectly and they are in full working order. There are obvious signs of age(see pics) Description: This is a very nice vintage set of metal. Possibly brass, casters. The diameter of the wheels is approx 1.5" inches and the metal top with the screw fasteners is 2" L by 1.5" wide. They will come exactly as shown. Satisfaction Guaranteed Unconditional 60 Day money back return policy Payment via PayPal Worldwide shipping Combined shipping Condition Code: As New Excellent Very Good Good Fair Poor
|
|
|
Vintage~Seo Of 4 SHABBY BRASS DRAWER PULL HANDLES-Furniture Repurpose
A set of 4 brass drawer pulls from an estate-They are Shabby in their true patina but in undamaged& useable condition-1 is gold tone(don't know if it's original finish or painted)2 3/8" wide x 1.5"No markings or numbers that I can find-Great for true vintage repurposing projects-See my other estate listings as I always combine shipping Posted with eBay Mobile
|
|
|
4 Antique Vintage Brass Leg Caps - Claw / Paw Feet Table Leg Covers
Here are Four(4) Antique/ Vintage Brass Table Leg Caps/ Covers. These are a Claw or Paw Feet Table Leg Covers. These measure approximately 1 5/8" wide. 1 1/2" tall in the back and 2 1/2" long from the back to the 2nd toes which seems to be the longest. There is a teeny hole in each side for the nail to hold these on. These are in good used condition, not perfect though. There are some spots of corrosion and this can be seen in the photos, they could also use a better cleaning than what I gave them. These are not bad considering their age and you could of course paint them with some gold paint if you don't like them the way they are. Buyer to pay actual First Class Mail. No handling. Paypal payment only with payment due within 3 days of auction close. Item will be shipped within 1 business day and I do combine items to save ... moreyou on shipping. Please be sure to check out my other items! Be sure to add me to your favorites list!
|
|
|
Vintage Lot Of 4 Matching Brass Lion Paw Furniture Leg Covers Caps NR
Up for bid is a vintage lot of 4 matching brass lion paw furniture leg covers. These old covers are in good condition. Measure 2" long, and fits a 1" wide furniture foot. See all pictures for best description. Please ask any and all questions before bidding and we will be more than happy to get back to you in a timely manner. We gladly combine shipping or give multiple purchase shipping discounts. If you are making multiple purchases from us and would like to combine your items for shipping to save the most money. Just message us and let us know and we will send you a combined invoice when you are done shopping! Please take a moment to review our feedback and bid with confidence. This is a no reserve auction. So bid now! Thanks for looking and happy bidding!
|
|
|
Antique Vintage gold brass drawer pull back plates four(4) pcs.total as-is cond.
Here are four(4) antique/vintage gold-toned brass drawer pull back plates with six(6) of the attaching handle swivels with appear as hand cut hexagon threaded nuts in"AS-IS" condition for refurbishing parts or repairs. The condition is good with scratches. Tarnish/patina and areas of surface corrosion and obviously missing pieces to make them complete. There are no identifying marks as to the maker. Country of origin or otherwise. Each back plate measures 2-5/8"W x 1-3/4"H x 5/16"D. The attachments measure approximately 1-1/4"L x 1/8" diameter. I believe these to be Empire style. These appear as if they may have came from a bedroom or vanity item. For their size they would have handled a larger drawer. Nice items and more are coming up from a large lot of antique and vintage brass furniture parts! Stay tuned!
|
|
|
Set of 4 Vintage BRASS LION Claw/Paw Feet Leg Cap estate auction find
You are bidding on: Set of 4 Vintage BRASS LION Claw/Paw Feet Leg Cap estate auction find. Thanks for looking and God bless. If there is a problem please contact me through eBay message system or by phone 814 258 7788 so we can resolve the issue before you leave feedback. Please don’t email us our email address is only for payments made with pay-pal. Most problems can be resolved with good communication. CUSTOMER SATISFACTION IS OUR TOP PRIORITY. Please remember when leaving feedback on shipping time, its how long I took to process your order, you are not rating the Post Office on how long it took to get to you, please keep that in mind. Bid with confidence, as we are an E-Bay Square Trade Member and an old-fashioned Mom& Pop store with customer satisfaction as our top priority. Check out our E-Bay store(babyonebaby1)for more neat stuff. ... moreSpecialize in the M151 military truck, FRANK'S SURPLUS, INC. since 1979) 814)258-7788 Tue.Fri. 9-5 EST. LOOK TAKE NOTE: If you use pay-pal we will only ship to the pay-pal registered/ confirmed address* GOD BLESS THE WORLD and HAPPY BIDDING. PLEASE if you need help-DO IT THE OLD-FASHIONED WAY, JUST GIVE US A CALL, WE STILL LIKE CALLS. WE ALWAYS COMBINE TO SAVE YOU $ ON SHIPPING. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage Brass or Bronze Drawer Pulls Wreath with Ribbon Set of 4
Here for your consideration is this Vintage set of 4 Brass or Bronze Drawer Pulls. They are in the motif of a wreath with a ribbon on top and the quarter is not included. The wreath's are marked F419 KBC and ribbons marked K4 3E. One of the pulls is just a little different than the other three but is not boldly noticeable. Please view all of the pictures for any condition issues that may be of importance to you and ask all questions prior to bidding.
|
|
|
SET OF 4 VINTAGE SOLID BRASS FURNITURE CASTERS 1 3/4" WHEELS
This is a very nice set of four solid brass casters with 1 3/4" diameter wheels. We will gladly combine lots whenever possible to save on shipping costs.
|
|
|
Gorgeous Antique Hardware Vintage Drawer Pull Brass French Provincial 4"centers
World Class Hardware.French Provincial Shabby Chic style These will look great on an antique or vintage piece Sold individually*2 Available Gorgeous vintage drawer pulls Wonderful naturally aged patina Charming flower petal shaped rosettes/back plates Excellent working condition. Strong, secure& swivel freely I will include 2 mounting screws.They will fit a 3/4" thick project. If you need mounting screws for a different thickness project, just call me or email a note upon checkout& tell me your project thickness. I will gladly include the correct screws to fit your project thickness The handle has the original ivory paint in the details/recesses Lots of character marks from age. Nicks, scratches Not perfect. Not new& definitely not reproductions, simply great authentic vintage hardware I guarantee you will never find a pull ... morelike this in any retail store All the best. Bryan My phone.847.917.8703 Dimensions(inches) On center mounting(that is the distance measured from the center of one screw hole to the center of the other screw hole.4 Diameter of rosette/back plate.1 1/4 Long(from outer edge of rosette to the outer edge of the other rosette.5 1/8 Drop(measurement from the hole where the handle inserts in the post to the lowest edge of the handle.1 1/2 Width of handle at middle.5/8 Project from drawer/cabinet front.3/4 stock# 296 SHIPPING DETAILS. FREE LOCAL PICK UP.At my home studio by appointment. UNITED STATES SHIPPING.click on"see details" for shipping options WORLDWIDE SHIPPING.click on"see details"to see shipping details
|
|
|
Lot 18 Vintage Victorian Brass Furniture Cabinet Cupboard Dresser Pulls Parts #4
Please be sure and check my other listings for more salvaged pulls. Lot#4 consists of 3 sets of 2 matching pulls. 1 set of 3 matching pulls, 1 set of 4 matching pulls, 1 set of 5 matching pulls, 18 in all. The two sets of 2 have some missing hoops and bails. The set of 3 has missing bails. The set of 4 has 2 missing bails and 1 missing hoop. The set of 5 has 3 missing bails, some hoops missing, one is severely bent with the hole where the hoop goes being ripped out. Some could have dents. All are stamped brass with steel bails and hoops. Perfect for your restoration project! All are 3" on center bore. Please see pictures for best description. Any questions please feel free to ask. Thank you. Thank you for viewing. We have many other listings so please click the link to view them. The following are the terms and conditions of this listing. ... moreBy placing a bid or using the buy it now option. You are agreeing to these terms. USA bidders only please. Shipping via USPS only unless otherwise specified in the listing. Shipped to your paypal address only. No exceptions. A handling fee may apply for select items to cover the the cost of packing materials. We recycle boxes and newspapers however we buy our bubble wrap, foam and tape. We pack well and do not just throw it in a box. If we say an item is perfect, it is. This means it has no damage. Damage is NOT a factory flaw such as straw marks in glass or imperfections in castings. Most of our items are old and used. Please do not expect fresh off the shelf new like look unless we say it is. We are honest sellers and deal with honest like minded buyers. After you buy an item is not the time to negotiate the price. Shipping costs are also non negotiable. We regret having this disclaimer but far too many have taken advantage of our kind nature. We do not accept returns unless our item is grossly misrepresented. When a return is made, we refund your money in full. Shipping costs are non refundable and non negotiable. We DO refund if shipping cost is MORE than
|
|
|
4 Vintage Victorian Solid Brass Wheels/Casters With Beaded Caps, Item#S
Up for auction are 4 Vintage Victorian Solid Brass Wheels/Casters With Beaded Caps. The rods are metal. The wheels and caps are heavy solid brass. The wheels swivel. I have seen these used on the front legs of chairs and settees from the 1800's. These wheels are used. The rods are rusted. The wheels and caps are tarnished and need cleaning. Please look at the pictures before you bid. The caps are 1 3/8" across. The wheels are 2 1/2" tall including the rod. The wheels are 1 1/4" tall not including the rod. We have a furniture restoration shop and we have decided to sell all of our old hardware. Look at our other auctions for more. We are shipping this item to the winning bidder via the post office. As soon as we receive full payment and it has cleared we will ship this item to the address that eBay gives us unless you email ... moreus a different"ship to" address. We ship Monday through Friday. Please look at the pictures. Ask questions before you bid. Please feel free to email us through eBay. We will not accept returns.
|
|
|
ANTIQUE VINTAGE heavy BRASS CABINET DRAWER KNOBS SET 4 SCREW-IN
Here for your pleasure are the knobs you have been searching for. They are heavy smooth brass.somewhat shiney.in good sturdy vintage condition. Which is to say: Imperfect. These could be shined to look like new.or keep the patina = your choice. One knob is missing the screw. Very substantial pieces. Ask away any questions you might have. I respond promptly. Sorry. No returns on this item unless it fails to meet the description of which the photos are a part. Check out my 15-year positive Ebay feedback and you will know I can be trusted. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-147869d8b34-0x10a-
|
|
|
Lot of 16 Vintage Brass Drawer Pulls 2 3/4" between screws 4 3/4" overall width
Lot of 16 vintage brass drawer pulls 2 3/4" between screw holes and 4 3/4" overall width All have dust.Dirt,scuffing,tarnish see all photos for condition
|
|
|
Vintage Lot Caster Wheels ~ Wood / Steel / Brass Caster Wheels ~ 3 Sets of 4
Included in this vintage lot of caster wheels are: 4 Wood caster wheels(1" diameter) and 3" to top of stem. No manufacturing marks 4 Brass caster wheels(3/4" diameter) and 2-1/4" to top of stem. No manufacturing marks. 4 Steel caster wheels(1" diamete) and 2-3/4" to top of stem. Marked Bassick# 4 All move and rotate freely. Photos are descriptive. Feel free to email with any questions. All for one bid!
|
|
|
SET OF 4 VINTAGE BRASS WHEELS FOR DRESSER BUREAU BED TABLE ETC...
Vintage ESTATE FIND all sales final no return,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-147a429e910-0x109-
|
|
|
Set of 4 Vintage Brass Bassick Casters Furniture Light Industrial White Wheels
1 5/8" round wheels and top rod is also 1 1/2" long. 4 Vintage brass Bassick casters in great working condition for your consideration. Wheels are a hard composite with brass and ball bearing fixtures. Great for that dresser or other piece of furniture you're restoring. There is surface rust/corrosion. Lite wear on wheels and one post is bent over at an angle and other is just a little bent See photos as part of description Thank you for looking. We have other amazing items at both our sites make sure to look at them. grandadsgarage01 or grandadsgarage2. We strive to give 5 star service so please e mail us with any questions before bidding or giving negative feedback. Please remember if payment for item is not received with in 3 days after the winning bid. On the 4th day it will automatically report it as a non payment dispute ... moreto E bay. This item is sold as is. No refunds on this item. Please excuse us for our used shipping materials. We try to keep America green and this is one more way we can help the environment. Feedback: We full and well understand how important feedback is to us and the e bay sellers as a community. If you are satisfied with your transaction please leave your 5 star positive feedback for us and we will be sure to reciprocate when we do our feedback update. But PLEASE do not leave feedback until you are satisfied. Feedback is not the way to solve a problem or announce that there is one. We are dedicated to making you our customers satisfied. Our policies are not written in stone and sometimes things happen that are outside of these policies and that there are extenuating circumstances at times. The key is to contact us and we will do what we can to make it right for all parties. So if you have a problem or question please email us.
|
|
|
Antique Antque Vintage Salvaged Brass Furniture Feet Caps / Tips 4 pcs.
Set of 4 Antique Brass Foot Caps/Tips in great condition! Ready to go! Please take a look at our other lots of hardware! We will be happy to combine shipping! Thank for looking and good luck bidding. You never know what you'll find at Jedshouse!
|
|
|
Lot 4 Vintage Walnut Brass Sofa Chair Ottoman Legs Feet Mid Century Modern 4.25"
This is a set of 4 vintage walnut and brass Chair. Ottoman, or Couch/ Sofa legs or feet. They are 4.25" inches tall and the screws at the top are attached. The legs taper from top to bottom. The circumference at top is 1.75 inches and the circumference at bottom is approximately 7/8 of an inch. These legs will turn any piece of furniture into a masterpiece. They are very well worn. As you can see from the photos, but the mid century design can't be beat. Replace any cold metal legs with these, and your chair, couch, or ottoman will take on a new life. The proportion of mid century furniture is all the rage again. Because the lower height allows for different design elements in a room. Why buy a new couch or chair when these legs may make all the difference? I accept PayPal and ship to the USA
|
|