|
4 TABLE LEGS TAPPERED WOOD VTG MID CENTURY MODERN WHITE 7 INCH
these are in good condition for the age may have been repainted any questions just ask thanks for looking ps the threads are 5/16 of an inch.
|
|
|
4 Antique Hand Turned Twisted Wood Furniture Parts / Pieces Reclaim Salvage
Each is just under 20" long and about 2.75" in diameter. Thanks! FREE SHIPPING TOO!
|
|
|
Antique Swivel Tilt Iron Metal Chair Spring Coil PART Johnson Milwaukee Wernicke
This auction is for a single Spring. No other parts included. Black Antique Swivel Tilt Iron Metal Chair Spring Coil Replacement Part. Some furniture manufacturers that made these types of chairs with single springs: Johnson Chair Co. Milwaukee Chair Co. Globe-Wernicke to name a few. Looking for a replacement spring for your antique swivel tilt chair. This is the one you need. The right amount of tension for proper tilt. Not too loose or rigid. Spring ends fit into the spring holder slots for a firm fit without slippage. Pictures#3 and#4. This is a new spring modified to fit antique chairs from the late 1890s to early 1900s similar to the ones in pictures#8 and#9. Dimensions: Free length 3 1/2" long Width at ends 1 3/4" Width at center 1 1/4" Wire diameter 1/4" Free Shipping and Returns accepted.
|
|
|
VINTAGE CARVED ART NOUVEAU STYLE WALNUT MAHOGANY PANEL
This is a nicely carved Art Nouveau style panel that started it's life as the back of a chair. It is just slightly curved. I believe it is made of a mix of mahogany and walnut, you will notice that the joints are all pegged. It measures 23" wide at the top, 18 1/2" wide at the bottom x 13" high. There are some small chips, overall it is in good condition. We also have another similar but larger panel presently listed. We will gladly combine lots whenever possible to save on shipping costs. Please e-mail with any questions.
|
|
|
4- ANTIQUE QUEEN ANNE LEGS FEET OLD Solid Wood Foot CHAIR BENCH STOOL WOODEN
Up for bids are 4 salvaged wood chair or table legs. Please view photos for best description and ask any questions. THANK YOU
|
|
|
19 pc wood furniture chair table legs and spindles, unfinished
Up for bids is a 19 piece lot of wood chair/furniture legs/parts. I think these are hardwood/Oak? The legs were turned on a lathe and I believe the end will need cut off for use. Only one of these has 2 holes drilled in the side. Please view the photos for best description and ask any questions. Thank you
|
|
|
ANTIQUE ARCHITECTURAL SALVAGE. ROLL TOP DESK for parts or repairs
ANTIQUE ARCHITECTURAL SALVAGE. ROLL TOP DESK for parts or repairs
|
|
|
ANTIQUE ARCHITECTURAL SALVAGE. 5 large OAK DRAWER FROM ROLL TOP DESK PARTS
ARCHITECTURAL SALVAGE. 5 LARGE OAK DRAWERs FROM ROLL TOP DESK shows signs of wear and use sold as repair/restore 3 DRAWERS 12" width 4 3/4" height 22 3/4" length 1 drawer 12" width 6"height 22 3/4" length 1 drawer 12" width 11.5"height 22 3/4" length
|
|
|
VICTORIAN WALNUT BOARD SHELF BEVELED EDGE SALVAGE
VICTORIAN WALNUT BOARD SHELF BEVELED EDGE SALVAGE 38 3/8" LONG BY 6 3/8" WIDE 3/4" THICK:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1489220f8a5-0x10d-
|
|
|
Vintage Antique Architectural Wood Acanthus Shell Crown Carved Salvaged Pediment
Vintage Architectural Wood Acanthus Leaf Shell Scroll Crown Carving Salvaged Approximate Dimensions 13 inches tall by 23 inches long at base by 3 inches thick(on top) dimensions taken at widest points Condition Good with Age and/or Wear* some small wood chips from age* please note picture for actual condition Mark None. Composition Wood. As noted in further detail below. The shipping charges are an estimate based on weight and size. If we are able to ship your item for less than originally quoted we will refund any difference exceeding $1.00 via your PayPal account. I do not claim to be an expert on this medium so please ask questions. Shipping Inquiries outside the Unites States will be handled individually. Please review our prior to all purchases. To make sure your shopping experience is both enjoyable and positive. We have clarified our ... morepolicies below. We ask that you familiarize yourself with these policies prior to making a bid/purchase in order to avoid any conflict that may arise. Do also keep in mind that we do consider offers and combine shipping costs when applicable. When submitting an offer. Please be respectful for we do consider the cost and value at time of reply. Layaway In tough economic times. We understand the struggles the average person faces for we face them as well. we provide several options for you. Our"Best Offer" feature included in a majority of our listings is provided as a toll where you can name the price if something is a bit out of reach in terms of our value of an item. Not all offers are accepted. Another option is our"Layaway" feature which allows the buyer to purchase the item and make incrimental payments as follows: Items Priced $150- $299 requires 50% down and requires full payment to be completed within 30 days Items Priced $300- $599 requires 50% down and requires full payment to be completed within 60 days Items Priced $600- $999 requires 50% down and requires full payment to be completed within 90 days Items Priced $1000 or higher equires consultati
|
|
|
VICTORIAN BURL WALNUT CHUNK SALVAGE
VICTORIAN BURL WALNUT CHUNK SALVAGE 6 3/8" LONG BY 23.5" AND 1 5/8" THICK
|
|
|
VICTORIAN WALNUT SALVAGE 1/2 ROUNDS + PCS
VICTORIAN WALNUT SALVAGE 1/2 ROUNDS + PCS.1/2 ROUNDS 4" LONG BY 2" HIGH 1.75" THICK OTHER PC ABOUT 4X4"
|
|
|
VICTORIAN LARGE ARCHED BURL WALNUT PANEL SALVAGE
VICTORIAN LARGE ARCHED BURL WALNUT PANEL SALVAGE 38.5" LONG BY 20.25" HIGH 1/2" THICK di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1489220f811-0x107-
|
|
|
VICTORIAN ARCHED WALNUT PANELS BURL PLAQUES SALVAGE
PAIR OF VICTORIAN ARCHED WALNUT PANELS BURL PLAQUES SALVAGE 23.75" LONG BY 14" HIGH
|
|
|
VICTORIAN WALNUT TOPPER OR BOTTOM DECORATION SALVAGE
VICTORIAN WALNUT TOPPER OR BOTTOM DECORATION SALVAGE 13.5" LONG BY 1.75" HIGH 7/8" THICK
|
|
|
BURLED PLAQUE TOP CAP VICTORIAN WALNUT SALVAGE
BURLED PLAQUE TOP CAP VICTORIAN WALNUT SALVAGE 8.75" LONG BY 1.25" HIGH 5.5" WIDE EDGE CHIP AS PHOTOD
|
|
|
PAIR SMALL VICTORIAN WALNUTEASTLAKE CORNER PCS BRACKET SALVAGE
PAIR SMALL VICTORIAN WALNUTEASTLAKE CORNER PCS BRACKET SALVAGE 4.75" LONG BY 2 7/8" HIGH.1 1/8" THICK.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-1489220f808-0x10b-
|
|
|
GREAT VICTORIAN WALNUT LONG DECORATIVE CENTER PLAQUE PCS SALVAGE
GREAT VICTORIAN WALNUT LONG DECORATIVE CENTER PLAQUE PCS SALVAGE 32" LONG BY 6.5" WIDE AND 2.25" DEEPEST. MULTIPLE PCS
|
|
|
PAIR LARGE UNUSUAL CORPEL STYLE POSTS PCS WALNUT VICTORIAN SALVAGE
PAIR UNUSUAL CORPEL STYLE POSTS PCS WALNUT VICTORIAN SALVAGE 25 7/8" LONG BY 3 7/8" WIDE AND" DEEP.
|
|
|
PAIR LARGE WALNUT VICTORIAN FINIALS unusual square top
LARGE WALNUT VICTORIAN FINIALS unusual square top about 5.5" square and 5" high
|
|
|
ROCOCO ROSETTE PULL
Sand-cast brass bail marked"391" on back; the rosette pulls are marked"1772" Six available
|
|
|
Lot of 3 Round Column Bases
9-17-14(15) This is a lot of 3 bases. One oak and two mahogany. From 6.5" to 5.75" wide. SHIPPING* While USPS is the selected shipping method. We also ship via FedEx in some cases. Your item may ship either USPS or FedEx. When your item ships a tracking number will be available for you to click on and track either way. Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VINTAGE CARVED WOOD OAK ARCHITECTURAL ROSETTES RESTORED LOT OF 2
PRICED TO SELL! VINTAGE CARVED WOOD OAK ARCHITECTURAL ROSETTES RESTORED LOT OF 2 Our wording is our unprofessional opinion only. Because people use words differently. And you probably know exactly how to describe our item, we provided many crispy clear pictures as our description: OUR DESCRIPTION: I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ... moreITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! FEEDBACK: Your feedback is important t
|
|
|
VINTAGE DECORATED ROUND PORCELAIN BEDPOST FINIAL KNOB FOR BRASS BED
446. VINTAGE CERAMIC BEDPOST FINIAL DECORATED ROUND CERAMIC FINIAL FOR BRASS BED ~ WITH HARDWARE US AND CANADIAN BIDDERS ONLY. PLEASE. DESCRIPTION Vintage round ceramic decoration or finial. Round ceramic with colorful flower decoration and leaves on the sides, has brass hardware on top and bottom for attachment to a brass bed. MEASUREMENTS This item measures about 3-3/4 inches high. The ceramic finial is about 2 inches in diameter, and the opening on the bottom(fits on bedpost) measures 1-3/8 inches. CONDITION ISSUES There is light visible wear(light scratches and scuffs) on this item. There are a few heavy scratches on the very top, some wear around the bottom, and this item is slightly dusty from storage. PLEASE SEE ABOVE PICTURES FOR MORE DETAILS. CONDITION HIGHLIGHTS This item has no visible: dents. Cracks, holes, chips, heavy wear, ... morestains, repairs, heavy scuffs, corrosion, rust, or water damage. Payment is only accepted through PAYPAL and is expected within three days of closing of auction. If you are not satisfied with this item. Please feel free to return it for a refund. Please note that shipping rates are estimated…any overages greater than $0.30 will be promptly refunded to your account. THANK YOU FOR LOOKING AND GOOD LUCK J* PLEASE CHECK OUT OTHER ITEMS I AM CURRENTLY OFFERING J* COMBINED SHIPPING COSTS FOR MULTIPLE WINS J
|
|
|
Eloquent Pair of Salvaged Paw Foot Chair Legs for Repurpose
Each leg is 12.5" tall which makes a good size to use as an alternative decorative ornament or as a shelf support. Overall they are 12.5" x 5" x 3.5" This item came from a furniture and design company that went out of business in the 1990's. Some pieces were removed from furniture that was in disrepair other pieces were left over stock from architectural design projects. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-14896700dd0-0x110-
|
|
|
Exceptional Quality set 4 Carved 32 inch Wood Legs
Each leg is 32.75 x 2.5" This item came from a furniture and design company that went out of business in the 1990's. Some pieces were removed from furniture that was in disrepair other pieces were left over stock from architectural design projects.
|
|
|
CARVED WOOD FRETWORK FRAGMENTS PARTS SHELF GALLERY BASE PROJECT
PRICED TO SELL! CARVED WOOD FRETWORK FRAGMENTS PARTS FOR SHELF GALLERY BASE PROJECT Our wording is our unprofessional opinion only. Because people use words differently. And you probably know exactly how to describe our item, we provided many crispy clear pictures as our description: OUR DESCRIPTION: I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ... moreITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! I AM LISTING MORE ITEMS TONIGHT. PLEASE CHECK MY OTHER LISTINGS- I DO COMBINED SHIPPING! FEEDBACK: Your feedback is importan
|
|
|
VINTAGE CAST IRON BASE-ANVIL STAND--STEAMPUNK IRON TABLE BASE-INDUSTRIAL DECOR
VINTAGE CAST IRON BASE-ANVIL STAND-STEAMPUNK IRON TABLE BASE-INDUSTRIAL DECOR Description FRESH INDIANA FARM FIND-VINTAGE CAST IRON BASE-STANDS 23-5/8" TALL HAS A BASE OF 11" X 17" TOP MEASURES 7" X 10"NO CRACKS;BREAKS OR REPAIRS-THIS WILL NEED PAINT OR LEAVE SURFACE RUST AS IS-MAKE A GREAT ANVIL STAND-STEAMPUNK TABLE-PLANT STAND-ECT-HERES A GREAT DISPLAY ITEM FARM;RANCH;COUNTRY;BAR OR RESTAURANT DECOR= =THIS WILL SHIP VIA FED-EX-MUST SHIP TO STREET ADDRESSS ONLY-NO PO BOXES CHECK MY OTHER SALES FOR MORE VINTAGE ITEMS-SOME WITH FREE SHIPPING= =SUPER-SIZE THE PICTURES FOR A BETTER LOOK! Before bidding… make sure you have read the description carefully. I describe the condition of the item; markings. Dimensions, flaws, and other comments to help you understand what may not be seen in pictures. Ask questions: Always. ... moreAlways, always do this if you are unsure about what you are bidding on or need to know ANYTHING about the item. Message me on eBay and I will promptly reply. We all work hard for our money- if you’re going to spend it with me, I want you to be satisfied. Shipping: Shipping costs on auction items are calculated along the basis of item weight and size. I WILL NEVER tack on handling fees or“made up” service charges. Combined Shipping: When multiple items can be packed together to save money and ship safely. I gladly will. I make nothing on shipping. Simply request an invoice before paying. Payment: this is simple. Pay Pal. It’s free to register and cost nothing to use. Payment is politely expected within 48 hours of winning the item. If the item is not paid for within 4 days, eBay will open an unpaid item case automatically. I will not turn off the unpaid item case. So this is pretty simple- If you are the winning bidder, Please pay for it. I strive to sell quality merchandise. I’ll pack your purchase carefully for shipment and hope win your confidence to become one of my many repeat customers with customer service like no other. Check out my“No Hassel Return Policy. Returns& D
|
|
|
Antique Ball and Claw Foot Small 2" Single
Small claw foot furniture foot. 2" tall. Ball is approx 7/8" diameter. Single piece unusual size.
|
|
|
4 Vintage Mid Century Modern Wooden Pencil Tapered Table legs 14-1/4"
Four used legs and brackets. 14-1/4" long. Good condition. May need to be refinished or painted due to wear marks. Brass plating is worn on tips. Threaded stud is 1/4" USA sales only.
|
|
|
FIVE 1 3/4" Brass Balls Connectors w/ a Hole in Side for Antique Brass Bed #49
Five 1 3/4" brass ball connectors with a hole in the side for antique brass bed. Measure 1 3/4" wide x 1 1/2" high. Top hole is 3/8" bottom hole is 1 1/8" side hole is 3/4" One has a flat dent next to side hole, some have paint residue. Smoke and pet free home.
|
|
|
TWO 1 1/2" Brass Balls with a Center Seam for Antique Brass Bed #47
Two 1 1/ 2" brass balls with a seam at the center for antique brass bed. Measure 1 1/2" wide x 1 7/8" high. Bottom hole is 1 3/8" One has dents, other has a dent and is compressed at the bottom. Smoke and pet free home.
|
|
|
2 Antique Cast Iron School Desk Legs No 3 Buffalo, Hardware New York Steampunk
Made in Buffalo. New York Approximate Measurements(as pictured) 26" High x 29 1/2" Wide. Nice heavy pieces of history!
|
|
|
Vintage Antique Brass Door Lock Cover Keyhole Salvage L2
Vintage Antique Brass Door Lock Cover Keyhole Salvage L2 Please ask if you have any questions! Shipping is always combinable! International shipping: While we offer international shipping. Please contact us first to confirm- we do not ship to some countries, and some items are just too heavy to ship overseas! Also, ask us about international shipping discounts! Payment is required within 7 days of auction ending. After 7 days. An unpaid bidder case will automatically open, and cancel the transaction. Items ending up to 7 days apart can apply the combined shipping discount. If this is the case, payment for the oldest item must still be recieved within 7 days. Please note: eBay will AUTOMATICALLY issue an unpaid buyer case after 7 days of non-payment. Invoices are sent in groups of 20 items; once this number has been hit in one invoice. We ... morerequire payment before further bidding. Mail will usually take between 7 and 10 days. Thank you once more for your bid! DUE TO AN EBAY INVOICE LIMIT OF 40 ITEMS. IF YOU WIN OVER 40 ITEMS, WE WILL SEND AN ADDITIONAL INVOICE. gsrx_vers_566(GS 6.7.1(566)
|
|
|
Group Five Wood Brass Spool Cabinet Pulls Knobs Hardware
group of five wood and brass spool cabinet pulls four matching appear to be newer old stock pulls and one old single pull.
|
|
|
Beautiful Victorian Style Vintage Drawer Pull Handle Knob Brass Ornate Cupboard
They could use some buffing with brass polish. If this is done I think these would make beautiful cupboard handles or for a dresser.
|
|
|
4 LG ANTIQUE ART NOUVEAU VICTORIAN CAST IRON BALL & CLAW HARDWARE TABLE LEG FEET
BEING OFFERED IS THIS SPECTACULAR SET OF HUGE SIZED. ANTIQUE ART NOUVEAU- VICTORIAN PERIOD, HEAVY, THICK, AND SOLID, TEXAS HISTORIC ESTATE FRESH, SALVAGED BALL N' CLAW ARCHITECTURAL HARDWARE TABLE LEGS& FEET, IN VERY GOOD TO EXCELLENT AGED CONDITION( PLEASE VIEW MY PHOTO'S) YOU ARE BIDDING ONE PRICE ON ALL FOUR HUGE SIZED ANTIQUE BALL N' CLAW TABLE LEG FEET! ALL HAVE AGED NICELY OVER THE LAST 130 + YEARS AS SHOWN! ALL FOUR HAVE A WONDERFUL, DARK, AND RICH AGED CAST IRON PATINA ON THEM AS SHOWN! ALL FOUR ARE QUITE HEAVY, SOLID, THICK, STRONG, AND WELL MADE! THEY ALL HAVE SOME MINOR ISSUES AS SHOWN. THEY HAVE NOT BEEN WASHED, CLEANED, OR WAXED. THEY CAN BE USED FOR MANY USEFUL AND ARTFUL PURPOSES! THEY EACH MEASURE A WONDERFUL AND HUGE DISPLAY SIZE: 29" HIGH, X 4" WIDE ACROSS THE CLAWS. THE SOLID GLASS BALLS EACH MEASURE ... more3 1/8" WIDE.
|
|
|
Vintage Cast Iron Castors Tilted Wheel , Swirl Wheel
Swirl Wheel Tilted wheels Cast iron Great condition when mounted the wheel would sit on an angle(see last photo) Heavy duty. And very well made Add a unique touch to piece of furniture or what ever you come up with. Please feel free to ask me any questions I will try my best to answer them for you. Thanks for looking. And happy bidding. No International Shipping PayPal payment only All items are sold as is No returns on this item Shipping will be USPS
|
|
|
SET OF 4 ANTIQUE 1800's GLASS PIVOTING FURNITURE LEGS
SET OF 4 OLD ANTIQUE FURNITURE GLASS AND METAL LEGS. OLD ANTQIUE GREEN GLASS WITH BUBBLES. 2 OUR IN GREAT CONDITION WITH PATINA. ONE HAS A FEW CHIPS IN GLASS. AND THE LAST ONE WILL NEED SOME REPAIR. SELLING AS IS. THANK YOU!
|
|
|
ONE13" by 7" MAPLE WOOD PANEL / UNFINISHED GHAIR BACK / FURNITURE SALVAGE
This is for one 13 3/4" by 7 1/2" Victorian Maple Wood Panel that I think is an unfinished chair back. It's in excellent condition except for a little dust and dirt. It's 1 1/2" thick but the finished part is about 3/4" to 7/8" I got it from a master craftsman who is in his late 80's and was forced to down size to a smaller shop and was getting rid of extra pieces he saved over the years for patterns etc.
|
|
|
Vintage Salvaged Furniture finial Trim Piece Crown pinnacle Walnut
Measures about 4 inches tall not including peg. 3 inches wide and 1 7/8 thick at it's thickest point, appears to be made of walnut see photos Check our other auctions for more interesting items freshly gathered from old Wisconsin estates. Please be prepared to pay for items within 4 days. Shipping to Canada will be less than International amount shown, please ask.
|
|
|
ONE VERY LARGE HEAVY FANCY 29" MAPLE WOOD CLAW FOOT TABLE LEG FURNITURE SALVAGE
This is for one Large Fancy Claw Foot Table Leg. I think it's Maple, 29" overall. The top is about 3 3/4" by 3 3/4" The bottom is 3" by 2 1/2" and about 5" across the front at the widest point. It was never finished as you can see in the photos. I don't know what you could use it for. Use your imagination, maybe a neat lamp. It's in very good to excellent condition except one toe is broke that you can see in the photos, and also a little dust. I got it from a master craftsman who is in his late 80's and was forced to down size to a smaller shop and was getting rid of extra pieces he saved over the years for patterns etc. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-148a187f26c-0x106-
|
|
|
Vintage Walnut Carved Foot Board Crest
9-17-14(38) This is a vintage walnut crest footbaord parts. It is in original finish. It is very clean. 18" High X 58.5" Wide X 3.5" Deep*SHIPPING* While USPS is the selected shipping method. We also ship via FedEx in some cases. Your item may ship either USPS or FedEx. When your item ships a tracking number will be available for you to click on and track either way. Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Pair Walnut Carved Twisted Column Corner Pieces with Griffin Lion Heads
9-17-14(31) This is a great pair of walnut corner column pieces. They have a twisted column and 2 lion/griffin heads with open mouth. The finish is original and very clean. 36" High X 3" Wide X 5" Deep*SHIPPING* While USPS is the selected shipping method. We also ship via FedEx in some cases. Your item may ship either USPS or FedEx. When your item ships a tracking number will be available for you to click on and track either way. Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Pair of Vintage Carved Bun Feet
9-17-14(37) This is a pair of carved bun feet. They are in original finish. There are a few dings and some wear. 5" High X 5" Wide X 5" Deep*SHIPPING* While USPS is the selected shipping method. We also ship via FedEx in some cases. Your item may ship either USPS or FedEx. When your item ships a tracking number will be available for you to click on and track either way. Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Made in England Silver Plated Lidded Canister Lion Heads
9-17-14(33) This is a nice lidded canister. It is silver plated and made in England. There are lion heads with rings on each side. Some plate is worn and needs polishing. 5" High X 5.25" Wide*SHIPPING* While USPS is the selected shipping method. We also ship via FedEx in some cases. Your item may ship either USPS or FedEx. When your item ships a tracking number will be available for you to click on and track either way. Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Depression Era Walnut Burled Head Board Top Crest
9-17-14(35) This is a clean burled walnut carved headboard top. It is very clean and in original finish. It could be a great 3 section mirror or nice crest. 30.25" High X 52" Wide X 1.5" Deep*SHIPPING* While USPS is the selected shipping method. We also ship via FedEx in some cases. Your item may ship either USPS or FedEx. When your item ships a tracking number will be available for you to click on and track either way. Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Antique Last Rites Viaticum Sick Call Oak Wall Hung Box Door
Antique Last Rites Viaticum Sick Call Oak Wall Hung Box Door Click to Enlarge Click to Enlarge Click to Enlarge Description: International Bidders: We mail only by priority mail. We no longer offer first class mailing. Please do not ask us to change shipping method! Delivery will be very slow even if using priority as customs is severely delaying shipments. If you are not willing to accept these terms we understand if you decide to not place a bid for the item. Offered for auction is a beautiful. Simple oak wood door for the Viaticum or"Last Rites" wall-hung box. The oak wood is in good condition without damage or excessive wear and there is clear glass to both the top and bottom door sections. The door measures 22-3/4" x 13" Shipping: Your item will be shipped by parcel post or priority mailing thru the United States ... morepostal service depending which method you the buyer have chosen from the options presented to you before bidding. If your item is shipped by parcel post. Please note that delivery time can be very slow! PLEASE NOTE: We always charged exact shipping cost, but Ebay's new policy forces us to estimate the shipping weight and package dimensions upon listing an item before it is ever even packaged. The cost in the calculator is the exact cost you will be charged, but in some cases not the exact actual post office cost to ship the item. If you think the cost is a couple of dollars too high than please compensate by bidding a couple of dollars less on the item! Payment: A prompt payment following the auction is most appreciated. International Bidders- We appreciate your interest in our auctions and your bidding. But please do not ask us to change the shipping option from Priority to First Class to lower the cost. We are able to track only Priority packages and will no longer ship any package internationally by First Class as there is no tracking available for those packages. NOTE: Due to Ebay's new insurance policy as of 9/23/09 we are no longer allowed to offer you a shipping in
|
|
|
Antique Lion Griffin Head Walnut Crest Top
9-17-14(39) This is an antique crest top. It has a nice lion griffin head center. It is in original finish. 8.5" High X 55" Wide X 4" Deep*SHIPPING* While USPS is the selected shipping method. We also ship via FedEx in some cases. Your item may ship either USPS or FedEx. When your item ships a tracking number will be available for you to click on and track either way. Listings are described to the best of my ability. Please message me with any questions before bidding. Items are sold as-is- no refunds. Payment is expected within 3 days of auction ending. Item will ship within 1-4 business days of received payment. Please bid carefully and accordingly! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4 mid century modern hairpin triple rod black wrought iron 29" tall table legs
this auction is for four vintage triple rod. Hairpin table legs. legs come from mid century table, sold used, show age, wear, paint loss, and tarnishing. legs are still strong usable, measure approx. 29 inches long.
|
|
|
ONE 31" by 3" CURVED MAPLE WOOD VALANCE / TABLR APRON FURNITURE SALVAGE
This is for one 31 3/4" by 3 1/2" by 2" Victorian Curved Maple Wood Table Apron or Valance never used or finished as you can see in the photos. It's in very good condition except for a little dust and dirt. I got it from a master craftsman who is in his late 80's and was forced to down size to a smaller shop and was getting rid of extra pieces he saved over the years for patterns etc.
|
|
|
ANTIQUE OR VINTAGE SOLID BRASS BRACKETS, ORNAMENTS, DECORATIONS, PARTS
NICE PAIR OF SOLID BRASS ORNAMENTS WITH THE LEAF PATTERN. THERE ARE 2 HOLES ON EACH SIDE ON THE WIDER PARTS WITH THREAD. SO THEY CAN BE ATTACHED WITH THE SCREWS. 15 1/2" X 5" X 5/16' TICK. THE WIDER PART IS 5/8"
|
|
|
ONE 4" by 22" OAK WOOD VALANCE / TABLE APRON / MOLDING FURNITURE SALVAGE
This is for one 22" by 4" by 2" Victorian Oak Wood Table Apron/Valance never used or finished as you can see in the photos. It's in very good condition except for a little dust and dirt and one broken piece on the end that you can see in the photo. I got it from a master craftsman who is in his late 80's and was forced to down size to a smaller shop and was getting rid of extra pieces he saved over the years for patterns etc.
|
|
|
Lot of 4 Antique spindles/balusters 14 1/2" long
4 antique wood spindles measuring 14.5" long x 1 5/8" diameter. Wood is solid even though paint is not great.
|
|
|
ONE 4" by 31" CHERRY WOOD VALANCE / TABLR APRON / MOLDING FURNITURE SALVAGE
This is for one 31 1/4" by 4 3/4" by 2 1/8" Victorian Cherry Wood Table Apron or Valance never used or finished as you can see in the photos. It's in very good condition except for a little dust and dirt. I got it from a master craftsman who is in his late 80's and was forced to down size to a smaller shop and was getting rid of extra pieces he saved over the years for patterns etc. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-148a187f266-0x10c-
|
|
|
Antique Kenney & Wolkins Adjustable Cast Iron Table Legs Industrial Machine Age
This is a antique pair of Kenney Bros. Wolkins cast iron adjustable desk or table legs. They adjust from a low setting of 18" up to 24" at highest adjustment.They are in very good condition with no damage to the cast iron. They are painted black. They adjust very smoothly. Good sturdy legs in very good shape. High bid pays postage. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-148a187f25b-0x10b-
|
|
|
Two Vintage Decorative Solid Wood Table Legs
Pair of Solid Wood Table Legs Measure 19.5" long. 5.5" wide and at the highest point, 9.5" tall Purchased from an estate I am unsure of what type of wood it is. The gentleman who sold them to me told me that they were oak but I am not sure These are solid Nice decorative pair of Table legs
|
|
|
Hoosier cabinet leg skirt polished brass (last 4 pieces)
New in package. 1 1/4" square by 3/4"
|
|
|
Early Genuine Hoosier Sugar Bin
Early Genuine Hoosier Sugar Bin. This is type that mounts inside lower right door of top section of early Hoosiers. Good original condition. No rust. Just has remenants of original paint. These are no longer being reproduced.
|
|
|
6 PULLS PULL DRESSER DRAWER HARDWARE
the 6 pulls are in good shape no screws.Please ask anything you need to know before bidding thank you also look at all the pictures
|
|
|
ANTIQUE CAST IRON ILLINOIS REFRIGERATOR SCHOOL DESK LEGS
ANTIQUE ILLINOIS REFRIGERATOR CO CAST IRON SCHOOL LEGS. NOTE) ONLY ONE OF THE LEGS IS MARKED BY THE COMPANY. EACH LEG WEIGHS APPROX 10 LBS. THE APPROX DIMENSIONS OF THE LEGS ARE 23" TALL BY 18- 22" WHEN THE LEG IS FOLDED OUT. THE LEGS LOOK IN GOOD CONDITION. NOTE) THE ONE LEG THAT IS MARKED. HAS ONE FOOT WHICH HAS SOME METAL THAT IS BROKEN OFF AND WHEN YOU EXTEND THE LEGS YOU WILL NOTICE THAT ONE IS SHORTER, IT MISSING ABOUT A INCH OF THE METAL. LOOK OVER THE PICS AND YOU SHOULD NOTICE WHAT I AM TALKING ABOUT. IF YOU HAVE ANY QUESTIONS. PLEASE ASK. PLEASE CHECK YOUR SHIPPING OPTIONS. UPS OR USPS I
|
|
|
293D Vtg Pair Tapered Table Leg Pedestal Pieces w/Brass Tips 26 3/4" Tall
THEY LOOK LIKE THEY MAY BE MADE OF MAPLE. BUT NOT SURE. THEY STAND 26 3/4" TALL AND HAVE A FLOOR STANCE/SPREAD OF 29 1/2" AND THE BRASS TIPS ARE 1 1/4" TALL FROM THE LEG BOTTOMS. THE ROUND THAT STANDS ON THE FLOOR IS 1 1/8" ACROSS AND THE LEGS GRADUATE UP TO 2 3/8" IN DIAMETER AS IS THE TOP MOUNTING POST IS 2 3/8" SQUARE, TOO. THEY ARE IN EXCELLENT STRUCTURAL CONDITION BUT YOU WILL WANT TO REFINISH THEM, OF COURSE. LOOKS TO BE 50"S-60"S PIECES. RD
|
|
|
Set of 4 Antique Industrial Moving Casters Steel 3 Wheel Swivel Made In USA
Set of 4 Antique Industrial Moving Casters Steel 3 Wheel Swivel Made In USA
|
|
|
Set (4) Vintage Cast Iron Industrial Cart Caster Wheels Original Green Paint!!
Fantastic old set of 4 cast iron industrial casters. Great original industrial green paint which you just about never find. 4" diameter swivel wheels. The really do have a wonderful look to them. Fast shipping!
|
|
|
6 PULLS PULL DRESSER DRAWER HARDWARE NOS MONTGOMERY WARDS
the 6 pulls are nos 5 still in package and one out the one thats out has no screws and is in good shape.Please ask anything you need to know before bidding thank you also look at all the pictures
|
|
|
2 Antique Cast Metal (Brass?)&Glass Ball&Claw Feet
Both are 4 1/2" long and are up to 2" wide.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-148a187f139-0x110-
|
|
|
Huge VTG Lot Wood Cast Iron Furniture Ball Rollers Industrial Casters Hardware
Huge Lot of 58 Various Wood& Cast Iron Vintage Furniture Rollers Industrial Casters. There are several sets. Includes swivel. Ball, industrial, antique wood and others. Check out all the pics. Great rustic lot to resell or use. One set could easily sell for my opening bid. Ships at the 16# rate or large flat rate. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SHIPPING AND HANDLING~~~~IN SOME CASES. I HAVE INCLUDED A SMALL HANDLING CHARGE IN MY STATED S/H TO BRING THESE ITEMS TO YOU; My SHIPPING AND HANDLING CHARGES ARE NOT MONEY MAKERS FOR ME BUT HELP TO OFFSET COSTS. I do not get the full amount you pay for shipping. Ebay takes and keeps 11% of what you pay for shipping. Paypal takes 3.5% Please do not hold me responsible for slow delivery times of the Postal Service. I MAKE A SPECIAL TRIP ... moreTO THE POST OFFICE TO SHIP WITHIN 24 HRS of receiving payment unless it is the weekend or a holiday. I DO NOT PAY FOR INSURANCE-IF THIS IS A PROBLEM, EMAIL ME IN ADVANCE. INSURANCE IS ALWAYS AN OPTION. COMBINED SHIPPING~~~~~~ IF YOU WIN MORE THAN 1 OF MY AUCTIONS AND YOU ARE GOING TO PAY WITH PAYPAL. PLEASE WAIT UNTIL I SEND YOU A COMBINED INVOICE AND MAKE ONLY 1 COMBINED PAYPAL PAYMENT. IF MULTIPLE PAYPAL PAYMENTS ARE MADE, NO SHIPPING DISCOUNTS CAN BE GIVEN. FEEDBACK~~~~Please remember when leaving feedback. The detailed seller rating system is based on a one- to five-star scale. Five stars is the highest rating, and one star is the lowest. I hope you will find every reason to give me a"5" Star rating in each category so that I can continue to bring items to the marketplace at a reasonable price. ALL ITEMS ARE SOLD. AS IS AND NO RETURNS, AND YOU CAN BE CONFIDENT THAT YOU WILL ABSOLUTELY RECEIVE YOUR ITEMS EXACTLY AS THEY ARE DESCRIBED. NON-PAYING BIDDERS PLEASE NOTE~~~~If you bid and win one of my auctions and do not pay. You are permanently banned from bidding on my auctions to give other buyers a chance. Also, if you have won more than two auctions from other seller
|
|
|
7 Vintage Furniture Leg Cushion Glides Casters Floor Protectors
VINTAGE set of 7 floor protectors- cushion glides- furniture leg glides- bases measures approx. 1 1/4 inches tall x 3/4 inches across the bottom From a smoke& pet free home
|
|
|
Delta Drill Press Cast Iron Metal Legs Antique Vintage Steampunk Leg Table Nice!
We have here a nice pair of cast iron machinery legs. The legs were probably taken from an older Delta drill press. Each marked DP 672. Each leg has a 6 inch extender on it for additional height. The legs have a few imperfections. Dents, and scratches, otherwise, they appear in pretty good condition. see pictures) These would be ideal for steampunk table applications. See detailed(high resolution pictures) to assess condition. Post the picture to your desktop and"zoom-in" on it there. Pick up for free 35 miles South of Philadelphia. Or ships freight collect. Zip 19350) Please Note: Please allow a minimum of 10 days for shipping. Because I have to obtain a pallet. Legs are about.100 lbs. each( prox. Pallet.65 lbs. prox. So…265 total lbs. prox. Dimensions would be 44” L x 30” W x 18" H. Buyer can choose. Arrange, pay, obtain ... morea bill of lading, and schedule, the carrier or freight line of his choice. I would suggest calling Freightcenter@ 800-716-7608 for a shipping quote if you can't pick it up. Terms: If picked-up.payment within 3 days and pick-up within 7 days. Terms: If shipped.payment within 3 days and the table will ship freight collect. Allow an additional $50 for palatalization. We can either load for free or deliver to a local trucking terminal. Buyer pays all shipping& insurance costs. See pictures. Shipping to USA only.
|
|
|
4 Swivel Antique 5" Steel Casters Heavy Duty Bassick Furniture Piano Movers
4 Swivel Antique 5" Steel Casters Heavy Duty Bassick Furniture Piano Movers. Here are 4 antique steel casters. They are marked on the sides. The casters are 1-3/4" tall. They are about 5-3/8" wide. Each one is signed. The wheels are made from steel. They appear to roll smoothly. They are in very good condition with no damage. The inside cup diameter is 2-1/2" There is some rust. Please view the pictures and ask all questions before bidding. We describe the item the best to our knowledge and the pictures are part of our description. WE DO NOT SHIP TO ITALY. NO PARTIAL REFUNDS. We offer a FULL refund upon return of the item if there is a mistake in the listing. INTERNATIONAL BIDDERS: ALL ITEMS ARE SHIPPED PRIORITY MAIL. NOT FIRST CLASS. THIS IS TO ENSURE A TRACKING NUMBER. ALL ITEMS ARE INSURED AND HAVE DECLARED PURCHASED ... moreVALUE. The buyer is responsible for all customs taxes and charges. Please note the estimated shipping cost which will be included in your final total. If you think the shipping cost is too high. Contact us to verify the charges in case there is a mistake. We purchase third party insurance for all items which is included in the shipping fees. Large or heavy items often ship Parcel Post, which can take up to two weeks in transit before delivery. If you need the item faster, please request Priority Mail shipping. Payment accepted via Paypal. With payment to be made within 3 days of close of auction. Please contact us before you bid if you need other arrangements. inkfrog terapeak. InkFrog Analytics. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-148a57496d9-0x10b-
|
|
|
Set 8 +1 Antique Pressed Brass 3.5" Bin/Drawer Pulls Salvaged Furniture Hardware
Estate Items Set 8 +1 Antique Pressed Brass 3.5" Drawer Pulls The 9th Is A"Close Enough" Match; Please see enlarged detailed photos to view beauty& exc cond ition. All sales as-is. Returns are accepted but refunds for returns do not include original S&H charges. Shipping includes modest handling per estate contract. ENJOY! BEING GREEN: I strive to run a GREEN business. If possible. Clean, appropriate shipping boxes of all sizes and packing materials, are gathered on recycling days to help reduce landfill. It takes time and effort, but I am proud to do my part to help reduce the stress on our landfills, economy and help reduce our carbon footprint. Thank you for checking things out and. ENJOY!
|
|
|
LOT OF 10 VINTAGE DRAWER DRESSER PULLS ART DECO MID CENTURY MODERN BAKELITE?
This auction is for a lot of 10 vintage dresser drawer pulls. They are a bakelite or plastic of some kind with the square in the middle being brass I believe. There is a broken bakelite piece on one of them as you can see in the picture. They need to be polished up. Each comes with mounting screws. I will answer any questions that I can. Thanks for looking and have a great day! All pre-owned clothing is laundered before being listed. New clothing is not washed or ironed. The size on the item is listed. However. Because many items shrink, we also provide measurements of each item as well. Please check the measurements to ensure a proper fit. If we do not know if an item is for a man, woman, boy or girl we may list it as unisex. Another reason to make sure that the measurements match you. We welcome returns for any item. However if an item ... moreis returned for fitting problems buyer will pay for shipping both ways. CHECK OUT OUR OTHER ACCOUNT. Andersonsoldattic. We will combine shipping if you purchase on both accounts. Just send us an email to let us know and we will send you an amended invoice. Thanks! PAYPAL IS THE ONLY FORM OF PAYMENT THAT I ACCEPT! If you need more photos of the item or if you need more information please contact me(for photos please send your email address) It is your responsibility to ask any questions that you might have BEFORE you bid. I do my best to answer questions within 48 hours. I will always combine shipping whenever possible except when to do so may cause damage to items.
|
|
|
14 Antique Victorian/Empire/Various Solid Brass Drawer Pulls Salvaged Hardware
Estate Items 14 Various Period Antique Solid Brass Drawer Pulls Please see enlarged detailed photos to view beauty& exc cond ition. All sales as-is. Returns are accepted but refunds for returns do not include original S&H charges. Shipping includes modest handling per estate contract. ENJOY! BEING GREEN: I strive to run a GREEN business. If possible. Clean, appropriate shipping boxes of all sizes and packing materials, are gathered on recycling days to help reduce landfill. It takes time and effort, but I am proud to do my part to help reduce the stress on our landfills, economy and help reduce our carbon footprint. Thank you for checking things out and. ENJOY!
|
|
|
Lot of 6 Hardwood Spindles 8-3/4" Furniture Salvage Inv. #195
6 Hardwood salvaged spindles in solid condition. 8.75" in total length Finished portion is 7.25" 1/2" wide at ends 1" wide at centers. Thank you for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-148a5d43b7f-0x116-
|
|
|
Set of Long Skinny Wooden Wood Table Legs Furniture Hardware 15"
Up for sale is a set of 4 long skinny wooden table legs. The legs are in good condition only need a minor paint/stain touch up. The legs measure 15" long. 1" diameter, 5/8" diameter at bottom. The legs have a bolt to screw into your furniture. I have 3 of the same sets of legs available of the same condition. Thank you.
|
|
|
AMAZING Antique Salvage & Repurposed Ornate CANDLE STAND
This stand was previously a smoke stand. But I see it now as a candle stand. It's super ornate and has great old patina! Most of it is metal which adheres to a magnet along with black glass along the stem. This would look great on a hearth! The base is 9 1/4" diameter. And it stands about 27" high. The top is 7 1/2" square with four openings which range from 2" to 3" in diameter. Candles not included. Greetings, I love to combine your purchases to save on shipping! Talk to me if you have a question or need more photos. Your purchase will ship FedEx Ground with insurance included and no signature required. I pack my items well as you can see by checking my feedback. It's my job to get your purchase to you unbroken and undamaged. I always issue an immediate refund when the shipper breaks an item. No matter how ... morewell I try to pack items. They still manage to occasionally break one. I hassle with the insurance, not you. If you buy more than one item from me. Please use a shopping cart and use the request a total from seller button. Wait to pay for your purchase until I've had time to give you an accurate shipping cost. I will update your invoice before you pay with the correct combined shipping. I charge actual shipping charges and I pass my shipping discounts on to you. Jacksonville. FL, residents are welcome to pick up with a cash-only payment. Satisfaction guaranteed or your money back minus shipping. Visit my eBay Store: Heirlooms In White
|
|
|
antique/vintage roll top 6 parts lot 168
for auction vintage/antique 6 parts measure 4 1/4 inches long sold as is shipping $9.00 usa thanks for looking 1
|
|
|
Ornate Pair Antique Cast Iron Legs Table Base Machine Age Industrial
Ornate Pair Antique Cast Iron Legs Table Base Machine Age Industrial Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: Ornate Pair of antique Cast Iron Legs Legs are marked SCHOOL FURNISHING CO. BLOOMSBURG PA Legs measure 22" tall. 13" wide across bottom of legs& 11" wide across top of legs with 3 tabs/holes for mounting Legs are excellent condition with just one chip of the base of one of the legs shown in the last photo Great project pieces Thanks for looking if you have any questions don't hesitate to ask Shipping: Combined shipping on items that can be safely shipped together. Payment: Payment expected in 4 days of winning the item. Please contact me if you need more time, otherwise ebay will automatically ... moreopen an unpaid item case. inkfrog terapeak.
|
|
|
4 Green Vintage wheels 3.5"
4 Metal Wheels Beautiful green color 3.5" across. About 5/8" wide Pictures show both sides of these wheels. These are metal. I think they are hollow. one of the wheels is a bit more dented and you can see where the metal is joined. These came off a small old cart. We're guessing 1920's or 1930's Please ask any questions before bidding. Thank you! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-148a965db81-0x112-
|
|
|
Mid Century Modern Screw In Furniture Feet, Armstrong Cork Co.
Description Lot of 4 Mid Century Modern Screw In Furniture Feet from the Armstrong Cork Co. Feet measure 2" across. condition: some wear. Scratches, small chips with color loss, scratches from use. Please see pictures. They are part of description.
|
|
|
Antique Steel Tape Dispenser with Wood Reel
No markings or steel stamps on item to place origin. Wooden reel still works.
|
|
|
EIGHT 3 3/4" Brass Connectors for Antique Brass Bed #53
Eight 3 3/4" brass connectors for antique brass bed. Measure 1 1/4" wide x 3 3/4" high. Top hole is 3/8" bottom hole is 1/4" Paint residue. Smoke and pet free home.
|
|
|
FIVE 3 1/4" Brass Connectors for Antique Brass Bed #54
Five 3 1/4" brass connectors for antique brass bed. Measure 1 1/8" wide x 3 1/4" high. Top& bottom hole is 3/8" Nice. Smoke and pet free home.
|
|
|
TWO 2 1/4" Brass Connectors with Hole in the Side for Antique Brass Bed #52
Two 2 1/4" brass connectors with a hole in the side and threaded bottom for antique brass bed. Measure 2" wide x 2 1/4" high. Top hole is 3/8" bottom hole is 1 1/8" side hole is 5/8" Nice. Smoke and pet free home.
|
|
|
EIGHT 1 3/4" Brass Caps with a Hole for Antique Brass Bed #52
Eight 1 3/4" brass caps with a center hole for antique brass bed. Measure 1 3/4" wide x 1/4" high. Center hole 3/8" Three have minor dents, some paint residue. Smoke and pet free home.
|
|
|
3 3/8" Brass Ring for Antique Brass Bed #50
3 3/8" brass ring for antique brass bed. Measure 1 1/2" wide x 2" high. Side holes 1/4" Good condition. Smoke and pet free home.
|
|
|
TWO 1 1/2" Brass Balls for Antique Brass Bed #49
Two 1 1/ 2" brass balls for antique brass bed. Measure 1 1/2" wide x 2" high. Bottom hole is 3/8" One is good, other has a tiny dent and a small dent right on top. Smoke and pet free home.
|
|
|
2" Brass Flat Top Cnnector for Antique Brass Bed #51
2" brass flat top connector for antique brass bed. Measure 2" wide x 1 1/8" high. Top hole is 1/4" bottom hole is 1 1/4" Nice. Smoke and pet free home.
|
|
|
Mid Century Tapered Pencil Wood Two Position Furniture Legs, 16", NOS
Superior 16" Hardwood Legs Contents include: 4 Hardwood Legs. 4 Floor Glides, 4 Two Position Top Plates, 4 Brass Plated Ferrules, 16 Wood Screws Box was sealed upon purchase from estate sale. Then opened to take a picture of the pieces Legs can be installed in the flared position or straight position Adjustable self leveler Wood is unfinished All metal pieces have oxidation
|
|
|
Antique Cast Iron Tool, Table Base Legs Vintage Industrial
Antique Cast Iron Tool. Table Base Legs Vintage Industrial. An antique iron tool or work table base in good condition. It's rusty but all good and solid. It measures 23.25" tall and is 17.5" wide by 12" long on top. Best guess it weighs 65 lbs or so. ABOUT See for more great items. New items are being added all the time so bookmark us and check back often! Add us to your favorite sellers using the link at the top right of this page and keep checking back or sign up for our newsletter to receive bi-weekly email updates on our newest listings. PAYMENTS PayPal is preferred as we are able to quickly process orders with ease. If you would like to use a different payment method please contact us and we will be happy to work with you. DOMESTIC SHIPPING We ship the majority of our items the day after payment is received via FedEx ... moreor the US Postal Service depending on the item. Please contact us before making a purchase if you have any questions. A surcharge will apply for purchases being shipped to P.O. Boxes or locations outside of the contiguous United States depending on the size of the item. Please contact us for a quote before completing a purchase. INTERNATIONAL SHIPPING We strive to make all of our items available internationally. On occasion size restrictions. High postage rates, and customs practices complicate things enough that we aren't able to complete a transaction but we will do what we can to work with international buyers. RETURNS We fully honor eBay's Money Back Guarantee. If the item you receive is not as it was described in this listing please contact us and we will work with you to address your concerns or your money back. Items can be returned for any reason within 14 days of receipt as verified by tracking information(tracking for packages being returned is required) Buyer pays return shipping. The full original purchase price including shipping(for listings without free shipping) will be refunded as soon as we receive the item. inkfrog terapeak. I000000. InkFrog Analytic
|
|
|
ANTIQUE OAK DOOR AND CORBELS FROM OLD SEWING MACHINE
ANTIQUE OAK DOOR AND CORBELS FROM SEWING MACHINE(HARDWARE LISTED FOR SALE SEPARATELY) BEAUTIFUL OAK VENEER CURVED DOOR LOADS OF QUARTER SAWN/TIGER OAK WOOD GRAIN SIGNS OF WEAR. SCREW HOLES, CHIPS 1 CORBEL CONNECTED NOT SEPARATE FINISH FAIR. PROBABLY NEEDS SOME HELP OVERALL VERY NICE PIECE MEASURES 27 ½” X 18 7/8” ALSO AN OAK VENEER BOARD NICE WOOD GRAIN FINISH DULL WEAR AND NOTCHED FOR HINGES AND CHAIN MEASURES 22 ¾” X ¾” TERMS OF SALE We describe every item to the best of our knowledge and ability. We make no claims to be an expert on these items. We try to let you know about any damage or defect that we are aware of. All measurements are approximate. All of our items are photographed to give the best possible description. The photos are meant to be as much a part of the information as the text. So please examine them. Please ... morekeep in mind some of our items are antiques and/or vintage pieces and may show natural wear which adds to the character of the piece. We sell as-is. Pleae contact us with any questions you might have prior to bidding.
|
|
|
4 Vintage white porceain furniture castors
Cool old collectables `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-148a96ffcc4-0x10d-
|
|
|
(2) DRAWER HANDLES, PULLS, FLOWER BACK PLATE,CAST IRON DRAWER PULL, PULLS
http:texastide88.webstoreplace.com/ You are buying or bidding on 2 solid cast iron drawer handles. Pulls. These have a unique vintage style look to them. Free shipping! Size is approx 6 5/8" long x 2 1/8" at the widest point. The screw holes are 5 5/8" apart. The back plate detaches. We sell these in quantities of 2-10. Click here to view our other Message us if you would like a quote for more. They would work well on furniture. Cabinets, doors, trunks. anything that needs a handle or pull. These are finished in a nice rustic brown color. Other pulls and handles available in our section. Great as is. Or paint to the color of your choice.These are made of cast iron and are hand cast. Slight variations are to be expected and if this item is raw metal. there could be a spot of rust visible. This is not detrimental to the price ... moreor value. Holes provided for fastening will sometimes vary in number and placement. No two are exactly alike. Holes provided for mounting. Hardware not included) xsell2 Many other fabulous items in these categories and. SHIPPING: Your item will be shipped. Within 24 business hours following payment, unless you have been notified of a delay. CAN'T WAIT FOR AUCTION TO END. PLENTY OF"BUY IT NOWS" IN THE STORE AND MANY ARE AT A LESSER PRICE. Check out my! Be sure to add me to your! by adding my eBay Store to your Favorites SHIPPING: ALL PACKAGES SHIP WITHIN 24 BUSINESS HOURS OF PURCHASE. UNLESS WE NOTIFY YOU OF A DELAY. NO POSTAL SERVICE ON WEEKENDS. ADDRESSES: BE SURE YOUR ADDRESS IS CORRECT IN EBAY AND PAYPAL BEFORE PURCHASE. WE DO NOT CHANGE ADDRESSES. IF YOUR ORDER IS RETURNED DUE TO INSUFFICIENT ADDRESS. THE CUSTOMER IS RESPONSIBLE FOR ANY SHIPPING CHARGES FOR RE-SENDS. COMBINED INVOICES: WHEN ORDERING MORE THAN ONE ITEM. DO NOT PAY THE FIRST AUTO INVOICE FROM EBAY. WAIT FOR US TO COMBINE TO ENABLE ONE PAYMENT. THIS REDUCES ERRORS ON YOUR ORDER.
|
|
|
Large Solid Metal Tripod Base w/ Threaded Center Hole for Flag Pole, Lamp Stand
This is 24-in. diameter with a 3/4-in. threaded hole. Items are shipped next business day with the USPS or FedEx Ground* SmartPost items are picked up by FedEx and delivered by the post office) Insurance is included on all purchases. I will combine and reduce shipping costs for multiple purchases. Please ask for an invoice as this is not automated. I like to stand behind everything I sell, so let me know if you have any problems or questions about your purchase. Any item I sell can be picked up in Morgantown, PA 19543. With the exception of some items paid for Sat/Sun) Check out my! Be sure to add me to your!
|
|
|
Old Salvage Ceiling Medallion 5 light fixture 1920 Detroit, Mi # 4
Antique salvaged plaster light fixture. 5 lights, ca. 1920 from an old apt. bldg. in Detroit, mi. The color is white chippy paint, scrolly ornate. It is in very good condition w/ some chippies around the center finial hole. All old wires still attached, in as-is, as-found condition. There are 4 listed in varying salvaged condition if one is particular. The conditions do not vary much except for number 1 that has a large chip. This auction is for this one only. See pics on all and you can see the minor imperfections. Please ask any questions. Policy: All items have a 2.00 handling fee. I use recycled packing materials whenever possible. I cannot give refunds or accept returns due to extreme sensitivities to fragrances. Smoke, chemicals etc. My home is smoke free. I will do my best to describe items in detail even tho they are old w/ possible ... moreminor imperfections. I encourage you to ask questions to avoid misunderstandings. Thankyou for your patronage.
|
|
|
Vintage antique used old metal wood wheel bed furniture casters wheels feet
VINTAGE ANTIQUE FURNITURE CASTERS. Lot of 4. 1 1/8" diameter. 5/8" width, and the shaft is 1 1/2" long. These are very old and rusted. One of the wood wheels is flat on one side. They will work as replacement casters for any old furniture like beds. Dressers, or tables. My items are from a smoke free. Pet free, home. Shipments are made to the lower U.S. only. Payment through PayPal only and due within 7 days of the auction end. Shipment will be made within one day of receiving your cleared payment. Returns are accepted only if the item is not as described. Please send an email if you have any questions concerning this item. Thank you for viewing.
|
|
|
Pair Antique Wood Furniture Wheels, Mkd Faultless 7
Here we have a Pair of Antique Wood furniture Wheels. Marked Faultles 7, one looks to have more wear than the other some rust otherwise in good condition, View pictures. Questions welcome, please ask your question early I am not always able to answer the last day. Buyer Pays $ 4.85 for S&H. I will combine shipping on Auctions in same week. Thanks for looking and Good luck! 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-148a96ffbab-0x112-
|
|
|
EXCELLENT ORNATE ANTIQUE CAST IRON LEGS
Set of wonderful ornate cast iron legs for your project- originally from an antique school desk- the point pivots 90 degree and unscrews from the rest of the leg- iron work is very nice- these measure 24 inches tall and 25 inches wide when pivot part is in up position- ships via Fedex insured to the lower 48 within 3 business days of payment- payment expected within 3 days of auction end
|
|
|
Pair Antique Metal Furniture Wheels, 1 inch round
Here we have a Pair of Antique Metal furniture Wheels. About 1 inch round, Not marked, some rust otherwise in good condition, View pictures. Questions welcome, please ask your question early I am not always able to answer the last day. Buyer Pays $ 4.85 for S&H. I will combine shipping on Auctions in same week. Thanks for looking and Good luck!
|
|
|
Cypress Sinker Log Table slab on Singer Sewing machine Base with a shelf below
Cypress Sinker Log Table slab on Singer Sewing machine Base with a shelf below. Hand rubbed Oil and Paste wax finish only, Metal has been cleaned and sealed with lacquer click here to view more photos, Be sure and read all details. This is local pickup only, Table is Approximately 4' long, 19" wide, and 32 inches tall, Top is from a Fist cut slab to square the Timber up for milling into Boards, it ranges in thickness from 5" down to 3" this was a Commercial singer sewing machine Stand The Foot Petal is still on it. but tack welded in place, I have a Local moving company that has a regular shipper for me for Years, also Some customers have had good results using Uship.com, I am a store front open Weds.Sunday 9-4 only my zip code is 70454. just an estimate on weight Base and top can be moved as one piece and weighs around ... more100 or so pounds. You may want to seal the top in a product of Your Choose or leave with the paste finish Like I do? Truly one of a Kind and a shade of Steam Puke influence.
|
|