|
|
Order by: Available to: eBay Affiliate Links
|
9d 10h 14m 14s 0 bids
$58.50 Now
$23.85 Shipping Location: Taunton, United States Nice old lock. got it all cleaned up and reasembeled. took the cylinder to a top notch lock smith and he made a key for 45.00 then i reasembled it.problem.would ... morenot work probably. so i took it apart.
Buy It Now
$13.06 Shipping Location: Bloomington, United States For your consideration an antique 1899 lock set. Still works properly. Key is missing.
Buy It Now
$18.40 Shipping Location: Bullhead City, United States I have been an avid collector of antiques & collectibles for fifty years. Lock Body: 2 5/8" H X 2 5/16" W X 1 7/8" D, Back Plate: 8 3/8" H X 3 1/16" W ... moreX 1/2" Inside Door Back Plate D, 5/8" Outside Door Back Plate D.
Buy It Now
$13.95 Shipping Location: Atascadero, United States Antique exterior/interior lock with missing handle. It is made by "NATIONAL". The front plates are approx. The inside black box/lock is approx. It appears ... moreto be brass on the outside plates. I do not know what the inside is made of.
Buy It Now
Free Shipping Location: Seattle, United States ⚠⚠⚠ WARNING ❗❗❗ This is NOT an automatic dead-bolt lock ! After pressing a valid code, you have ONLY 3-sec (indicated by a 3-sec long beep) to TURN the ... morekeypad knob to unlock! If you don’t turn the keypad knob within this 3-sec, the lock will be back to the “lock position.”.
Buy It Now
Free Shipping Location: Augusta, United States Gate House Mortise Lockset Entry not for Exterior Use
Buy It Now
$27.95 Shipping Location: Los Angeles, United States ⚠⚠⚠ WARNING ❗❗❗ This is NOT an automatic dead-bolt lock ! After pressing a valid code, you have ONLY 3-sec (indicated by a 3-sec long beep) to TURN the ... morekeypad knob to unlock! If you don’t turn the keypad knob within this 3-sec, the lock will be back to the “lock position.”.
Buy It Now
Free Shipping Location: New York, United States ⚠⚠⚠ WARNING ❗❗❗ This is NOT an automatic dead-bolt lock ! After pressing a valid code, you have ONLY 3-sec (indicated by a 3-sec long beep) to TURN the ... morekeypad knob to unlock! If you don’t turn the keypad knob within this 3-sec, the lock will be back to the “lock position.”.
Buy It Now
Free Shipping Location: New York, United States Both levers are always unlocked. Each lockset features strong individual compression springs and optional through-bolt installation that prevents lever ... moresag. Easy to follow installation instructions.
|
|
|
|
Antique Colonial Cast Bronze Exterior Entry Door Set Lockset Knob Plate Lock Key
Penn Antique Restoration. Antique Colonial Style Cast Bronze Entry Door Set Lockset. Elegant. Original, antique, exterior door lockset salvaged from Southeastern PA. The set includes 2 bronze knobs, 1 large bronze escutcheon with swinging keyhole cover, 1 bronze rosette, 1 bronze keyhole cover, 1 iron mortise lock with bronze faceplate, 1 working key, 1 bronze strike plate for the door jamb, and 1 spindle with 2 set screws. All bronze parts are solid, heavy, cast bronze. At the point of salvage all parts were dirty. Partially painted, and unevenly tarnished(see last photo) Since then, we've cleaned and polished all parts to the best of our ability. You could tell that the hardware came from a well-maintained home because the set is in great shape! The parts have nicks and scratches. Which are typical for hardware this old, but no breaks, ... morecracks, gouges, or chips. The lock was opened. Inspected, and WD-40 was sprayed on and around all parts to facilitate their movement. A key was made especially for this lock, and we could make more for $6/key—let us know if you are interested. After the auction. Someone removed the buttons from the lock faceplate. The buttons controlled a function. Which disabled/enabled the knobs to turn. With the knobs unable to turn, the upper latch remains extended, in the locked position. In essence, both latches would act as deadbolts and provide extra security. Once the knobs are frozen, and the door is shut, the only way to retract the upper latch is by using the key for the top keyhole. I'm certain that whoever removed the buttons, didn't have the key for the top keyhole and he/she had to force the door open in order to push the button, to enable the knobs to turn. If this were my set, I would remove the buttons as well, and this is not only because I'm a parent of a young child who couldn't help himself from playing with the buttons; but accidents do happen. I may bump into the button on way on my way out, and by the time I get home, I have to break into my house bec
|
|
|
Modern Solid Aluminum Exterior Deadbolt Entry Door Lockset Knobs Plates Lock Key
Penn Antique Restoration. Modern Aluminum Door Set Knobs Plates Lock& Strikeplate. Mid Century Modern. Heavy-duty, commercial grade hardware made by"Russwin" of New Britain, CT around the middle of the previous century. The set consists of 2 aluminum knobs, 2 stamped aluminum escutcheons, 1 steel mortise cylinder with 2 working keys, 1 steel mortise lock with an aluminum faceplate, 1 bronze strike plate for the door jamb, and 1 split spindle with a securing nut and a pin. The whitish lines or bands in the latches of the lock are made of some kind plastic. Since this set was used for commercial installation. It was designed to be strong and secure. The exterior knob is permanently affixed to the spindle with a securing pin. Once the knob is mounted on the escutcheon, the tall collar of the plate bars access to the pin. The only ... moreway you could access the pin is by loosening the screw and removing the knob on the other side of the door. The lock is not reversible. And it could only accommodate a door that swings into a home, towards the right. If your door swings in the other direction, you could still install this set, but you would have to install it upside down, with the knobs on top, and cylinder mortise on the bottom. The mortise lock is locked by pushing the bottom button on the faceplate. And unlocked by either pushing the top button or using a key. Once locked, the door could only be opened by turning the knob on the interior side of the door, or by using the key on the exterior side of the door. This is a very convenient feature for the person inside of the room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the bottom button. The knobs and plates have a simple. Straightforward design. At the point of salvage, we found the set very clean with only a subtle patina. If you prefer your hardware bright and shiny, we could clean the set prior to shipping f
|
|
|
Modern Bronze Plain Exterior Deadbolt Entry Door Lockset Knobs Plates Lock Keys
Penn Antique Restoration. Modern Cast Bronze Door Set Knobs Plates Lock& Strikeplate. This set is only for a right-handed door. Beautiful. Modern, door set salvaged from Northeastern PA. The set was made by"Yale& Towne" of Stamford, CT around the 1980's. It consists of 2 bronze knobs, 2 stamped bronze escutcheons, 1 steel mortise cylinder, 1 steel mortise lock with a bronze faceplate, 1 bronze strike plate, and 1 split spindle with a securing nut. One half of the spindle is unable to be removed from the knob. To reconnect the knobs requires to engage the threaded portions of the spindle and turn clockwise. All bronze parts are solid, cast bronze, not stamped or plated iron. The white part between the latch is made of plastic which indicates this set is modern. The knobs and plates have a simple. Straightforward design. ... moreAt the point of salvage, we found the set clean and lacquered. It is"New Old Stock" which means that the set was made a long time ago but was never used. There are only small nicks here and there on the lacquer caused by the environment. This only leaves the set with a subtle distressed look. Otherwise. All parts are in excellent condition with no breaks, cracks, or deep scratches. The lock was opened inspected and we sprayed WD40 on and around all internal parts to facilitate their movement. We are unsure what are the four parts used for(see last photo) But we did get them included with the set so we will include them in this auction just in case it is important. Dimensions: Knobs: 2 1/4" diameter x 2" Escutcheons: 2 1/4" x 7 3/8" Strike Plate: 1 3/4" x 4 7/8" Lock: Plate) 1 1/4" W x 7 7/8" H(Body) 3 1/2" W x 5 5/8" H x 3/4" D(Backset- distance from faceplate to center of knob hole) 2 5/8" Shipping: U.S. FREE! Canada: $26.99· Asia. Australia, Europe: $34.99 Other international buyers please email us for a quote. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14161cda1a6-0xfc-
|
|
|
Antique Brass Beaux Arts French Exterior Entry Door Lockset Knob Plate Lock Key
Penn Antique Restoration. Antique Beaux Arts Style Entry Door Set Knobs Plate Lock Key. Gorgeous. Antique, entry door lockset made by"Lockwood Lock Co. of Fitchburg, MA circa 1914. The set consists of 2 brass knobs, 1 brass stamped escutcheon, 1 stamped brass rosette, 1 stamped brass keyhole cover, 1 iron mortise lock with cast brass faceplate, 2 working keys, 1 cast brass strike plate for the door jamb, and 1 spindle with 2 set screws to connect the knobs, and 12 screws(not shown in the photos) to install the lock and plates. The knobs and plates are solid brass, not brass plated steel. Originally, all parts were copper plated, however, except for the keyhole cover, which retained most of it's plating, only traces of copper could be found on the other parts. The knobs and escutcheon have a stunning French style design-check out ... morethose whiplash curves! All parts were found dirty and unevenly tarnished(see last photo) Since then. We've clea ned and polished all parts to the best of our ability. One of the knobs has a tiny dent. Which could be seen in the close up photo of the knobs, and the keyhole cover has some tiny dents too. Otherwise, the set is in great condition with only minor nicks and scratches here and there, typical for hardware this old. There are no breaks, cracks, chips, dents, gouges, or heavy scratches. The lock was opened. Inspected, and we sprayed WD-40 on and around all parts to facilitate their movement. We also made 2 keys to operate the lock, and we could make more for $6/key-email us after the auction if you are interested. If you like this set. Get it while you can! Art Nouveau entry sets are much harder to find than Victorian, Arts& Crafts, Art Deco sets, and they tend to go quickly when they are available for sale. Don't miss out! Dimensions: Knobs: 2 1/4" diameter x 2 1/8" D Escutcheon: 2 3/4" W x 10 1/4"H Rosette: 2 1/8" diameter Keyhole Cover: 1 1/8" W x 1 3/4" H Strikeplate: 1" W x 4 3/8" H Lock: Plate) 1" W x 6 7/
|
|
|
Restored Vintage Brass Exterior Deadbolt Entry Door Lockset Knobs Plate Lock Key
Penn Antique Restoration. Vintage Solid Brass"Yale" Door Set w/Knobs. Plates, Lock& Keys. Elegant. Vintage, door set made by"Yale& Towne" of Stamford, CT sometime during the first half of the previous century around the fist half of the previous century. The set consists of 2 brass knobs, 2 stamped brass escutcheons, 1 steel mortise lock with brass faceplate, 1"Corbin" brass mortise cylinder w/2 keys, 1 brass strike plate for the door jamb, 1 steel split spindle with 1 setscrew and 1 securing pin to connect the knobs, and 8 installation screws to fasten the lock and plates to the door. All brass parts are solid brass, not plated iron. Although the set has a simple. Straightforward design, the elegant curves of the escutcheons add a stylish element to the aesthetic appeal of the set. Notice the lower, ... moretriangular latch of the lock. The middle section is made of a hardwood-what rare feature! At the point of salvage. All parts were painted and dirty. Since then, we've cleaned and polished all parts to the best of our ability. Considering it's age. The set is in great condition! There are some small dents around the upper screw hole of the interior escutcheon and on the faceplate of the lock, and there is a small dent in the center of one of the knobs(tough to spot) Otherwise, there are only subtle scratches and tiny nicks here and there, which are typical for hardware this old. However, there are no breaks, cracks, or gouges. About the Lock: The lock is fully reversible and could accommodate the swing of any door. The mortise lock is locked by pushing the top button on the faceplate. And unlocked by either pushing the bottom button or using a key. Once locked, the door could only be opened by turning the knob on the interior side of the door, or by using the key on the exterior side of the door. This is a very convenient feature for the person inside of the room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close th
|
|
|
Vintage NOS Sargent Brass Exterior Deadbolt Entry Door Lockset Knobs Plates Lock
Penn Antique Restoration. Vintage NOS Sargent Brass Door Set w/Knobs. Plates, Lock. Heavy-duty. Vintage, entry door lockset made by"Sargent" of New Haven, CT during the second half of the previous century. It consists of 2 brass knobs, 2 brass escutcheons, 1 steel mortise lock with a brass faceplate, 1 brass anti-theft collar, 1 brass strike plate for the door jamb, 1 steel split spindle with a setscrew for connecting the knobs, and all 12 installation screws to fasten all parts to the door. All brass parts are solid brass, not plated steel. This is a high-quality, commercial-grade lockset. This set is"New Old Stock" which means that it was made a long time ago but was never used. We found it in it's original box(see 3rd photo) There was no mortise cylinder included with the set. This is the round. Barrel-like piece ... morethat goes into the lock, above the knob on the exterior side, and engages the lock once a key is inserted into it and turned. You could pick one up, brand new, with 2 keys at your local locksmith or hardware store for less than $20. The lock is reversible and could accommodate the swing of either a left or right swing door. The mortise lock is locked by pushing the top button on the faceplate. And unlocked by either pushing the bottom button or using a key. Once locked, the door could only be opened by turning the knob on the interior side of the door, or by using the key on the exterior side of the door. This is a very convenient feature for the person inside of the room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the bottom button. All parts are in excellent condition. There are only tiny nicks and light scuffs here and there most likely caused by the parts shuffling around and bumping into each other inside of the box. We opened. Inspected, and sprayed WD40 on and around all internal parts of the lock to facilitate their movemen
|
|
|
Vintage Bronze NOS Exterior Deadbolt Entry Door Lockset Knobs Plates Lock & Keys
Penn Antique Restoration. Vintage"Yale" Bronze Door Set w/Knobs. Plates, Lock, Keys. Exquisite. Heavy-duty, vintage entry set made by"Yale& Towne" of Stamford, CT sometime during the first half of the previous century. It consists of 2 bronze knobs, 2 bronze escutcheons, 1 steel mortise lock with a bronze faceplate, 1 bronze mortise cylinder w/2 working keys& 1 bronze anti-theft collar, a 2-piece bronze strike plate for the door jamb, 1 split spindle with 1 setscrew and 1 securing pin, and 14 bronze installation screws. All bronze parts are solid bronze, not plated steel. The lock is reversible and could accommodate the swing of any door. The knobs and plates have a sleek. Straightforward design. Notice the lower, triangular latch of the lock. The middle section is made of a hardwood-what rare feature! This set ... moreis considered. New Old Stock, which means that it was made a long time ago but was never used. Aside from a few light scuffs here and there, all parts are in excellent condition with no breaks, cracks, dents, or deep scratches. The lock was opened inspected and we sprayed WD40 on and around all internal parts to facilitate their movement. The lock operates smoothly. It's tough to find complete. Antique sets in such fantastic condition. With all parts included, this set will be ready to install as soon as it arrives. Who knows if and when another opportunity like this will present itself-don't miss out! Dimensions: Knobs: 2 1/4" diameter x 2" Escutcheons: 2 1/4" x 7 3/8" Strike Plate: 1 1/4" x 5 3/4" Lock: Plate) 1 1/4" W x 8" H(Body) 3 5/8" W x 5 3/4" H x 3/4" D(Backset- distance from faceplate to center of knob hole) 2 3/4" Shipping: U.S. FREE! Canada: $29.99· Asia. Australia, Europe: $49.99 Other international buyers please email us for a quote. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-144bd9741cb-0xea-
|
|
|
RARE Antique Industrial Brass Iron Exterior Entry Door Lockset Knobs Plates Lock
Penn Antique Restoration. Rare Antique Industrial Cast Brass& Iron Exterior Lockset. Rare. Heavy-duty, commercial grade lockset made by"Norwalk Lock Co. of Norwalk, CT around the turn of the previous century. It consists of 2 iron knobs(1 egg-shaped& 1 T-shaped) 2 brass escutcheons, 1 brass mortise lock. 1 brass mortise cylinder with a brass anti-theft collar, 1 brass strike plate for the door jamb, and 1 steel spindle(knob connecting rod) with a setscrew. All brass and iron parts are solid, heavy, thick, cast brass and iron, not flimsy, stamped or pressed sheet metal. The parts of this set are of the highest quality. All of the parts of the set combined weigh nearly 5lbs! In the last paragraph. I emphasized, brass mortise lock, because it is extremely rare to find an exterior lock which is made entirely of brass. Normally, the ... morebody of a lock is iron or steel, and the faceplate and latches are brass. This is a rare, and high-end lock. Another interesting aspect of this set is it's knobs. Egg-shaped knobs are uncommon and large T-shaped knobs are extremely rare. Not only are the shapes of the knobs unusual. But they are made of cast iron instead of brass like the rest of the parts. There are no signs either that the iron parts were ever brass-plated. Considering that the lock body is brass, we could rule out that the client wanted a less expensive metal used for the knobs to save money. My guess is that this set was custom made for a client who had a unique taste. Although we show the egg knob on the exterior side of the lockset. It doesn't mean that the T-shaped knob couldn't be on the exterior. You could put whichever of the 2 knobs you like on the outside of your door. Condition: We didn't clean the set. And judging by the very subtle patina on the brass and lack of rust spots on the knobs, you could tell that someone has been periodically cleaning the set. If you would like the set as clean as possible, we could clean and polish the set prior to shipping for an additional $30-email
|
|
|
Vintage Arts Crafts Brass Exterior Entry Door Lockset Set Knobs Plates Lock Keys
Penn Antique Restoration. Vintage Arts& Crafts Brass Door Set w/Knobs. Plates, Lock& Key. Handsome. Vintage, exterior door lockset salvaged from Northeastern Pennsylvania. The set consists of 2 brass knobs, 2 stamped brass escutcheons, 1 steel mortise lock with a brass faceplate, 1 working key, 1 brass strike plate for the door jamb, 1 split spindle with 2 setscrews to connect the knobs, and 12 installation screws to fasten the plates to the door. All brass parts are solid brass, not plated iron. Originally, all brass parts were copper plated, however, much of the copper wore off over the years leaving the parts with a nice, distressed finish. The lock is reversible and could accommodate the swing of any door. At the point of salvage. The set was found painted, dirty, and unevenly tarnished(see last photo) Since then, we've removed ... morethe paint, and cleaned and polished the set to the best of our ability. There is a deep scrape on one side of the receiver portion of the strikeplate. This has no affect on it's function. Nor is it structurally threatening; it is just a cosmetic blemish. A 2" portion of the back of the lock body broke off, and we re-secured it using some industrial-strength epoxy. The repair is strong and should last for as long as the lock does. Even if it were to come undone, that part of the lock body doesn't affect the functionality of the lock. Once the lock is installed, the repair scar will be invisible. Otherwise, all parts just have the light nicks and scratches that you would expect to find on 70- 80 year old hardware. There are no breaks, deep scratches, gouges, or dents. The lock was opened. Inspected, and we sprayed greased on and around all internal parts to facilitate their movement. The lock operates smoothly and is ready to serve for many years to come. We made a key to operate the lock and we could make more for $8/key- email us after the auction if you are interested. Dimensions: Knobs: 2 1/4" diameter x 2 1/4" Escutcheons: exterior) 2 3/4" x 9
|
|
|
Antique Brass Exterior Entry Door Lockset Set Oval Beaded Knobs Plate Lock Keys
Penn Antique Restoration. Antique Brass Door Set Oval Beaded Knobs Plate Lock Key Beautiful. Antique, exterior door lockset salvaged from an old. row house in Washington DC. The set consists of 2 brass knobs, 2 brass escutcheons, 1 iron mortise lock with brass faceplate, 2 working keys, 1 brass strike plate for the door jamb, and 1 spindle with 2 setscrews. All brass parts are solid, brass, not plated steel. The knobs and escutcheons have lovely oval forms. Embellished with bold, beaded borders. The set was found with a beautiful patina. Which we didn't want to disturb. However, if you like you hardware bright and shiny, we could clean and polish the set for an additional charge of $30- email us after the auction. All parts are in great shape with only the typical nicks and scratches that you would expect to find on century-old hardware. ... moreHowever. There are no breaks, cracks, chips, dents, or gouges. About the lock: The lock is reversible and could accommodate the swing of any door. The buttons on the lock faceplate control a function. Which disables/enables the exterior knob from turning. Once the bottom button is depressed, the exterior knob will not turn, and the upper latch will remain extended, in the locked position. In essence, the upper latch acts as a deadbolt and provides an extra level of security from anyone on the outside of the door. Once the exterior knob is frozen, and the door is shut, the only way to retract the upper latch is by using the key for the top keyhole, or by turning the interior knob. This is a very convenient feature for the person inside of the house/room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the top button. We opened and inspected the lock. And sprayed grease on and around all internal parts to facilitate their movement. We made 2 keys to operate the lock from both keyholes, and we could make additional keys if you like, for
|
|
|
Antique Brass Exterior Entry Door Lockset Knobs Russwin Enfield Plates & Key
Check out my other items! Antique Brass Door Set with Russwin Lock. Russwin Enfield Door Plates, Knobs. Made by"Russwin" of New Britain, CT in the early 1900's. Lock with the original Key are both marked"Russwin" The Door Plates are Solid Brass and marked"Russwin, 8 X 2 1 2, on one end and the other end is marked"Enfield 902 1 2. The mortise part is marked"Hauserman"and"Sargent" Two extra locks One Marked"Yale" and one Marked" New Keil York" Dimensions: Knobs: 2- diameter Knob to Know approx 6" Door Plates: 2-1/2" W x 8" H Thank you! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-1474495fabb-0x10d-
|
|
|
Antique Yale Deco Nickel Brass Exterior Entry Door Lockset Set Knob Plate Lock
Penn Antique Restoration. Antique"Yale" Nickel-plated Brass Exterior Set w/Knobs. Plates, Lock, Screws. Rare. Elegant, antique, exterior door lockset made by, Yale" of Stamford CT sometime during the first half of the previous century. It consists of 2 brass knobs, 2 brass escutcheons, 1 iron mortise lock with brass faceplate, 1 brass mortise cylinder, 1 brass strike plate for the door jamb, 1 steel spindle with 1 setscrew and 1 securing pin connect the knobs, and all 8 of the original screws to fasten the parts to the door. All brass parts are solid. Brass, not plated steel. Except for the escutcheons which are stamped(pressed) brass, all brass parts are heavy, thick, cast brass. Originally, all parts were nickel plated, and surprisingly, most of the plating remains! Either the plating is very thick, or this set was hardly ... moreused, because after almost a century of use, the plating should've at least wore off of the knobs. The knobs and escutcheons have a fantastic. Art Deco style design, which is accentuated by an unusual textured detail. At the point of salvage. Some parts were painted and all parts were dirty and unevenly tarnished(see last photo) Since then, we've cleaned and polished all parts to the best of our ability. All parts have some cosmetic blemishes including nicks and scratches. Which are best conveyed by the photos. However, these just add a distressed charm to the parts and do not pose any threat to the structural integrity of the parts. All parts are strong, sturdy, and ready to serve another lifetime. About the lock: The mortise lock is reversible and could accommodate a right or left swinging door. We found the cylinder mortise without a key. Without a key. We are uncertain if the cylinder works. You could take it to a local locksmith, who may be able to rekey it. Worst case, if he/she can not make a key for it: 1) you would have to buy a new cylinder with keys for about $20 and widen the hole in the exterior plate from it's current size of 5/8" diameter to 1 1/8
|
|
|
Vintage Arts Crafts Brass Exterior Entry Door Lockset Set Knob Plate Lock + Keys
Penn Antique Restoration. Vintage"Russwin" Brass Exterior Set w/Knobs. Plates, Lock, 3 Keys! Handsome. Antique, exterior door lockset made by, Russwin" of New Britain, CT sometime during the first half of the previous century. It consists of 2 brass knobs, 2 brass escutcheons, 1 iron mortise lock with brass faceplate, 1 brass mortise cylinder with a brass anti-theft collar& 3 working keys, 1 brass strike plate for the door jamb, and 1 steel spindle with 2 setscrews to connect the knobs. All brass parts are solid. Brass, not plated steel. Originally, all parts were copper plated, however, only traces of copper remain. The set was salvaged from Northwestern New York. We found all parts with a lovely amber and auburn patina. Which we didn't want to disturb. If you prefer your hardware bright and shiny. We could clean and ... morepolish the set prior to shipping for an additional $25-email us after the auction if you're interested. The knobs and smaller. Interior escutcheon have a few subtle dents which are hard to notice unless you study the parts. Otherwise. All parts just have the tiny nicks and light scratches that you would expect to find on 70- 80 year old hardware. There are no breaks, deep scratches, gouges, or cracks. Lock: The mortise lock is reversible and could accommodate a right or left swinging door. The mortise lock is locked by pushing the top button on the faceplate. And unlocked by either pushing the bottom button or using a key. Once locked, the door could only be opened by turning the knob on the interior side of the door, or by using the key on the exterior side of the door. This is a very convenient feature for the person inside of the room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the bottom button. The mortise lock was opened. Inspected, and we sprayed grease on and around all internal parts to facilitate their movement. We a
|
|
|
2 available Vintage Cast Bronze Exterior Entry Door Lockset Knobs Plates Lock
Penn Antique Restoration. ~ 2 available ~ Vintage"Lockwood" Bronze Door Set w/Knobs. Plates, Lock& Strikeplate. Although there are 2 sets available. The list price is for 1 set. If the quantity above is 1, this indicates that 1 set sold. If you are planning on purchasing only 1 set. Email us after the auction and let us know which of the 2 sets you would like. Heavy-duty. Commercial-grade, door lockset made by, Lockwood, of Lockwood, CT sometime during the first half of the previous century. Each set consists of 2 bronze knobs, 2 bronze escutcheons, 1 bronze cylinder mortise with bronze anti-theft collar, 1 steel mortise lock with bronze faceplate, 1 brass strike plate for the door jamb, and 1 split spindle with a setscrew and securing pin to connect the knobs. All bronze parts are solid, heavy. Thick, cast bronze, not stamped ... morebronze or plated iron. Since these sets were used for commercial installation. They were designed to be strong and secure. The exterior knobs are permanently affixed to the spindles with a securing pin. Once the knobs are mounted on the escutcheons, the collars of the plate bar access to the pins. The only way you could access the pin is by removing the knob on the other side of the door. We found the cylinder mortises without keys. Without keys. We are uncertain if the cylinders work. You could take it(or them if you buy both sets) to a local locksmith, who could rekey it for under $20. If it is not functional, you could also buy a new cylinder with 2 keys for the same price. The knobs and plates have a simple. Straightforward design. We normally clean sets that have an uneven patina, but this set has such a cool, industrial look that once removed, will never go back on the same way. We priced the sets less than our clean sets and left the choice up to you. We could clean and polish all parts prior to shipping for an additional $25/set- email us after the auction if you are interested. All parts have small nicks and scratches here and there. Which are typical for old, used ha
|
|
|
Vintage Arts & Crafts Cast Bronze Exterior Entry Door Lockset Knobs Plates Lock
Penn Antique Restoration. Vintage"Lockwood" Bronze Door Set w/Knobs. Plates, Lock& Strikeplate. Heavy-duty. Commercial-grade, door lockset made by, Lockwood, of Lockwood, CT sometime during the first half of the previous century. The set consists of 2 bronze knobs, 2 bronze escutcheons, 1 bronze cylinder mortise with bronze anti-theft collar, 1 steel mortise lock with bronze faceplate, 1 brass strike plate for the door jamb, and 1 split spindle with a setscrew and securing pin to connect the knobs. All bronze parts are solid, heavy. Thick, cast bronze, not stamped bronze or plated iron. Since this set was used for commercial installation. It was designed to be strong and secure. The exterior knob is permanently affixed to the spindle with a securing pin. Once the knob is mounted on the escutcheon, the collar of the plate bar ... moreaccess to the pin. The only way you could access the pin is by removing the knob on the other side of the door. We found the cylinder mortise without a key. Without a key. We are uncertain if the cylinder works. You could take it to a local locksmith, who could rekey it for under $20. If it is not functional, you could also buy a new cylinder with 2 keys for the same price. The knobs and plates have a simple. Straightforward design. We normally clean sets that have an uneven patina, but this set has such a cool, industrial look that once removed, will never go back on the same way. We priced the set less than our clean sets and left the choice up to you. We could clean and polish all parts prior to shipping for an additional $25- email us after the auction if you are interested. All parts have small nicks and scratches here and there. Which are typical for old, used hardware. However these character marks only add to the set's distressed look. There are no real flaws like breaks, cracks, or gouges. About the lock: The lock is not reversible. And it could only accommodate a door that swings into a home, towards the left. If your door swings in the other direction, you could s
|
|
|
Antique Cast Bronze Egg Dart Exterior Entry Door Lockset Set Knob Plate Lock Key
Penn Antique Restoration. Antique Cast Bronze Egg& Dart Entry Door Lockset. Wow. What a rare find! This gorgeous, antique, exterior door lockset was made by"Barrows Lock Co. of Chicago. IL around the turn of the previous century. It consists of 2 bronze knobs, 2 bronze escutcheons, 1 iron lock with bronze faceplate, 1 bronze strike plate for the door jamb, 1 bronze cylinder mortise w/4 working keys, 1 spindle w/2 setscrews to connect the knobs, and 10 installation screws to fasten the lock and plates to the door. All bronze parts are solid, heavy, thick, cast bronze, not stamped(pressed) bronze or plated iron. The knobs and escutcheons have a fantastic. Egg& dart design, which is accentuated by a beautiful, rich, original patina. All of the dark greens are pure verdigris-not paint! We know that not everyone is a fan of patina, ... moreand if you prefer your hardware clean and shiny, although it would break our heart, we could clean and polish all parts prior to shipping for an additional $30-email us after the auction if you are interested. The set was salvaged from Northeastern Indiana. We found it in excellent condition with no breaks. Chips, cracks, gouges, or deep scratches. About the lock: The lock is reversible and could accommodate the swing of any door. The mortise lock is locked by pushing the top button on the faceplate. And unlocked by either pushing the bottom button or using a key. Once locked, the door could only be opened by turning the knob on the interior side of the door, or by using the key on the exterior side of the door. This is a very convenient feature for the person inside of the room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the bottom button. The lock was opened inspected. Partially cleaned, and grease was sprayed on and around all parts to facilitate their movement. Both mortise lock and cylinder function smoothly. If you think that
|
|
|
Vintage NOS Arts & Crafts Brass Exterior Entry Door Lockset Knobs Plate Lock Key
Penn Antique Restoration. Vintage NOS Brass-plated Steel Door Set w/Knobs. Plates, Lock, Key. Elegant. Vintage, door set salvaged from Southeastern NH. The set was made by"Lockwood Hardware Mfg. Co. of Fitchburg, MA. It consists of 2 knobs, 2 escutcheons, 1 steel lock with a faceplate, 1 strike plate, 1 spindle and a working key. All parts are made of steel and are plated with brass. There are a few places were the brass wore off, but the majority of the plating is intact. The set is considered. New Old Stock, which means that it was made a long time ago but was never used. Aside from the tiny nicks and light scratches in the plating. All parts are in excellent condition with no breaks, cracks, dents, or deep scratches. About the lock: The lock is reversible and could accommodate either a left or right swing door. The buttons on the ... morelock faceplate control a function. Which disables/enables the exterior knob from turning. Once the bottom button is depressed, the exterior knob will not turn, and the upper latch will remain extended, in the locked position. In essence, the upper latch acts as a deadbolt and provides an extra level of security from anyone on the outside of the door. Once the exterior knob is frozen, and the door is shut, the only way to retract the upper latch is by using the key for the top keyhole, or by turning the interior knob. This is a very convenient feature for the person inside of the house/room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the top button. The lock was opened. Inspected, and we sprayed grease on and around all internal parts to facilitate their movement. The lock operates smoothly. Although the set came with only 1 key. We could make more keys for a charge of $8/key-email us after he auction if you are interested. Dimensions: Knobs: 2 1/4" diameter x 2 1/8" Escutcheons: Exterior) 2 3/4" x 9 1/2" Interior)
|
|
|
Antique Neo Classical Bronze Exterior Entry Door Lockset Set Knob Plate Lock Key
Penn Antique Restoration. Antique Neo-Classical Bronze Door Set w/Knobs. Plates, Lock, Key Beautiful. Antique, exterior door lockset made around the turn of the previous century. The set consists of 2 bronze knobs; 1 larger, bronze, exterior escutcheon; 1 smaller, bronze, interior, escutcheon with a thumbturn; 1 iron mortise lock with bronze faceplate; 1 bronze strike plate for the door jamb; 1 brass mortise cylinder with 1 working key and 1 brass anti-theft collar; and 1 spindle with 2 setscrews to connect the knobs. All bronze/brass parts are solid bronze/brass, not plated steel. Originally, all bronze parts were copper-plated, however, much of the plating wore off over the years. The knobs and plates are embellished with an exquisite. Neo-Classical style design. At the point of salvage. The set was found dirty and unevenly tarnished(see ... morelast photo) Since then, we've cleaned and polished all parts to the best of our ability. The knob collar of the exterior plate broke or fell off at some point and someone re-secured it with solder. Although the repair worked and the collar is secure. The silver-colored ring around the collar stuck out like sore thumb. We removed most of the solder with some steal wool and a lot of elbow grease. Whatever solder remained will be concealed by the knob. On the exterior plate. There is a crack in the bottom of the knob collar, and a few small dents and scratches around the hole where the mortise cylinder goes. Otherwise, all parts are in great condition with only the typical small nicks and light scratches that you would expect to find on 100+ year old hardware. About the lock: The lock is reversible and could accommodate either a left or right swing door. The buttons on the lock faceplate control a function. Which disables/enables the exterior knob from turning. Once the bottom button is depressed, the exterior knob will not turn, and the upper latch will remain extended, in the locked position. In essence, the upper latch acts as a deadbolt and provides an extra level of sec
|
|
|
Vintage NOS Brass Steel Entry Exterior Door Deadbolt Lockset Set Plate Lock Key
Penn Antique Restoration. Vintage NOS Arts& Crafts Deadbolt Lockset w/Plates. Keys, Screws Elegant. Vintage, lockset made by, Welch Inc. of Waukegan, IL sometime around the middle of the previous century. The set consists of 1 steel mortise lock with brass faceplate, 1 mortise cylinder w/1 working key and 1 anti-theft collar, 1 steel plate for the mortise cylinder, 1 brass thumbturn, 1 brass strike plate for the door jamb, a 2-piece spindle to connect the knob, and 11 screws to fasten all parts to the door. All brass parts have been painted black by the manufacturer. There are a few spots where the paint wore off. But the majority is intact. This set is considered. New Old Stock, which means that it was made a long time ago, but was never installed or used. Since it was never used, all parts are in excellent condition and function like ... morenew. Dimensions: Mortise Cylinder Plate: 1 7/8" W x 2 1/2" H Thumbturn: 1 1/4" W x 1 3/4" H Strikeplate: 1 1/ 8" W x 2 5/8" H Lock: Plate) 1 1/8" W x 4 5/8" H(Body) 3 3/8" W x 3" H x 7/8"D(Backset-distance from faceplate to center of keyhole) 2 1/2" Shipping: U.S. FREE! Canada: $14.99· Asia. Australia& Europe: $19.99· Other international buyers please email us for a quote. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14b01698846-0x10e-
|
|
|
Vintage SOLID Brass NOS Exterior Entry Door Lockset Knob Plate Deadbolt Lock Key
Penn Antique Restoration. Vintage"Norwalk" NOS Brass Door Set w/Knobs. Plates, Lock, Key. Exquisite. Heavy-duty, vintage entry set made by"Norwalk Lock Co. of Norwalk, CT sometime during the first half of the previous century. It consists of 2 brass knobs, 2 brass escutcheons, 1 steel mortise lock with a brass faceplate, 1 bronze mortise cylinder w/1 working key& 1 brass anti-theft collar, 1 brass strike plate for the door jamb, 1 split spindle with 2 setscrews, and 12 installation screws. All brass parts are solid brass, not plated steel. At the point of salvage. The set was missing a knob. We found one in our collection that is a near match to the knob found with the set. The knob we found was tarnished, and although we cleaned and polished it to the best of our ability, it doesn't have the same mirror-finish of the ... morerest of the parts. However, as time goes on and all of the parts begin to tarnish, they will eventually have a similar finish. The lock is reversible and could accommodate the swing of any door. This set is considered. New Old Stock, which means that it was made a long time ago but was never used. Aside from a few light scuffs here and there, all parts are in excellent condition with no breaks, cracks, chips, dents, or deep scratches. The lock was opened inspected and we sprayed grease on and around all internal parts to facilitate their movement. The lock operates smoothly. It's tough to find complete. Vintage sets in such fantastic condition. With all parts included, this set will be ready to install as soon as it arrives. Who knows if and when another opportunity like this will present itself-don't miss out! Dimensions: Knobs: 2 1/4" diameter x 2 1/8" Escutcheons: 2 1/2" x 8" Strike Plate: 1" x 5" Lock: Plate) 1" W x 8" H(Body) 3 1/2" W x 6" H x 3/4" D(Backset-distance from faceplate to center of knob hole) 2 1/2" Shipping: U.S. FREE! Canada: $29.99· Asia. Australia, Europe: $49.99 Other international
|
|
|
Cleaned Vintage Arts Crafts Exterior Entry Door Lockset Set Knob Plate Lock Keys
Penn Antique Restoration Penn Antique Restoration. Cleaned Vintage Arts& Crafts Door Entry Lockset w/Knobs. Plates, Lock, Key. Charming. Vintage, exterior door lockset salvaged from Upstate New York. The set consists of 2 steel knobs, 2 stamped steel escutcheons, 1 steel mortise lock with bronze faceplate and 1 working key, 1 steel strike plate for the door jamb, and 1 spindle with 2 setscrews to connect the knobs. Originally. The knobs and plates were brass plated; however, some of the plating wore off over the years leaving the parts with a nice, distressed finish. At the point of salvage. Some parts were painted, and all were dirty and rusty. Much time was spent removing the paint, and carefully cleaning and polishing all parts, trying to preserve as much of the brass plating as possible. All parts have the tiny nicks and light scratches ... morethat you would expect to find on old door hardware. However. There are no breaks. Cracks, chips, dents, or deep scratches. About the lock: The lock is reversible and could accommodate the swing of any door. The buttons on the lock faceplate control a function. Which disables/enables the exterior knob. Once the bottom button is depressed, the exterior knob cannot be turned and the triangular-shaped"passage latch" on the lock will remain extended, in the locked position. In essence, the"passage latch" acts as a secondary deadbolt and provides an extra level of security from anyone on the outside of the door. Once the exterior knob is disabled, and the door is shut, the only way to retract the upper latch is by using the key or by turning the interior knob. This is a very convenient feature for the person inside of the house/room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the top button. The lock was opened. Inspected, and we sprayed grease on and around all parts to facilitate their movement. We also made a
|
|
|
Vintage Cast Bronze Exterior Entry Door Lockset Knobs Lock no key
Vintage Cast Bronze Exterior Entry Door Lockset Knobs Lock no key 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14b454b6b07-0x10e-
|
|
|
Antique Chrome Bronze Exterior Entry Door Lockset Set 15" Pull Handle Lock +Key
Penn Antique Restoration. Antique Chrome-plated Bronze Door Lockset w/ 15" Pulls. Lock, Key. Beautiful. Antique, exterior door lockset salvaged from upstate New York. It consists of 2 back plates, 2 bronze handles and thumb latches, 1 iron mortise lock with bronze faceplate, 1 bronze strike plate for the jamb, 1 bronze cylinder mortise w/1 working key& 1 bronze anti-theft collar, and 4 steel nuts to secure the pulls to the backplates. All bronze parts are solid, heavy, thick, cast bronze, not plated iron/steel. Originally, all parts were chrome plated. Most of the plating remains, however, the amount of plating varies from part to part; please see photos for more detail. The set was made by. Russwin, of New Britain, CT sometime during the first half of the previous century. The design of the pulls is called, Granby. The mortise lock ... moreis fully reversible and could accommodate the swing of any door. We only found 1 mortise cylinder with the set. Although the key works. It's a bit stubborn. A locksmith may be able to make a newer key, which will work better. You could also just get 2 new mortises, which are keyed alike to have for both front and back sides of the door. At the point of salvage. All parts were very dirty and heavily tarnished(see last photo) Since then, we've cleaned and polished all parts to the best of our ability trying to preserve as much of the plating as possible. During it's years of service. The set acquired some tiny nicks and light scratches here and there, which are only cosmetic blemishes or"character marks. There are no serious flaws like breaks, cracks, or gouges. We opened, inspected, and sprayed grease on and around all internal parts of the mortise lock to facilitate their movement. All parts are still strong, sturdy, and ready for another lifetime of service. Dimensions: Pulls: Plates) 3" W x 15" H(Handles) 1 1/8"W x 5 7/8" H x 2 3/8" D(finger space between the pull and the backplate) 1 3/4" Strikeplate: 1 1/4" W x 5" H
|
|
|
Antique Colonial Solid Brass Exterior Entry Door Lockset Knobs Plates Lock Keys
Penn Antique Restoration. Antique"Corbin" Colonial Brass Door Set w/Knobs. Plates, Lock& 2 Keys. Handsome. Antique, exterior door lockset salvaged from Northeastern Illinois. The set consists of 2 brass knobs, 2 stamped brass escutcheons, 1 steel mortise lock with a brass faceplate, 2 working keys, 1 brass strike plate for the door jamb, and 1 split spindle with 2 setscrews to connect the knobs. All brass parts are solid brass, not plated iron. We found the set with a nice. Original, patina, which we didn't want to disturb. There are a few spots of white paint, and some paint along the edges of the lock faceplate, strike plate, and exterior escutcheon. If you prefer your hardware bright and shiny or at least with a uniform finish, we could clean and polish the set prior to shipping for an additional $25-email us after the ... moreauction if you're interested. The knobs have a few. Very subtle dents, as does the lock faceplate. Otherwise, all parts just have the tiny nicks and light scratches that you would expect to find on old, used hardware. However, there are no breaks, deep scratches, gouges, or cracks. About the lock: The lock is reversible and could accommodate the swing of any door. The buttons on the lock faceplate control a function. Which disables/enables the exterior knob from turning. Once the bottom button is depressed, the exterior knob will not turn, and the upper latch will remain extended, in the locked position. In essence, the upper latch acts as a deadbolt and provides an extra level of security from anyone on the outside of the door. Once the exterior knob is frozen, and the door is shut, the only way to retract the upper latch is by using the key for the top keyhole, or by turning the interior knob. This is a very convenient feature for the person inside of the house/room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the top button.
|
|
|
Antique Colonial Bronze Steel Exterior Entry Door Lockset Knobs Plates Lock Key
Penn Antique Restoration. Antique"Barrows" Colonial Bronze/Steel Door Set w/Knobs. Plates, Lock& Key. Handsome. Antique, exterior door lockset made by, Barrows Lock Co. of Chicago, Illinois. The set consists of 2 bronze knobs, 2 stamped bronze escutcheons, 1 steel mortise lock with 1 working key, 1 steel strike plate for the door jamb, and 1 split spindle with 2 setscrews to connect the knobs. All bronze parts are solid bronze, not plated steel. All parts were originally copper plated, however, some parts retained more plating than others(see photos to compare) We found the set with a nice. Original, patina, which we didn't want to disturb. If you prefer your hardware bright and shiny or at least with a uniform finish, we could clean and polish the set prior to shipping for an additional $25-email us after the auction if ... moreyou're interested. The collar of the exterior escutcheon has a crack in it. Which is only cosmetic and doesn't impair its function. Otherwise, all parts just have the tiny nicks and light scratches that you would expect to find on old, used hardware. However, there are no breaks, deep scratches, gouges, or cracks. About the lock: The lock is reversible and could accommodate the swing of any door. The mortise lock is locked by pushing the top button on the faceplate. And unlocked by either pushing the bottom button or using a key. Once locked, the door could only be opened by turning the knob on the interior side of the door, or by using the key on the exterior side of the door. This is a very convenient feature for the person inside of the room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the bottom button. The lock was opened. Inspected, and we sprayed greased on and around all internal parts to facilitate their movement. The lock operates smoothly and is ready to serve for many years to come. We made a key to operate the lo
|
|
|
Antique SOLID Bronze Exterior Entry Door Lockset Set 14.5" Pull Handle Lock +Key
Penn Antique Restoration. Antique Bronze Door 14.5" Lockset w/Pulls. Lock, Key. Robust. Antique, exterior door lockset salvaged from New York City. It consists of 2 stamped bronze back plates, 2 cast bronze handles and thumb latches, 1 iron mortise lock with bronze faceplate, 1 bronze strike plate for the jamb, 1 bronze cylinder mortise w/1 working key& 1 bronze anti-theft collar, and 2 steel washers and nuts to secure the pulls to the backplates. All bronze parts are solid bronze, not plated iron. The mortise lock is fully reversible and could accommodate the swing of any door. Although we did find 2 cylinder mortises with the set. The key worked for only one of them. We figured that for a set like this, you would either need 2 cylinders keyed alike, or 1 keyed cylinder for the exterior side and 1 thumbturn cylinder for the interior. ... moreIf you would like the 2nd cylinder that we found, please let us know after the auction. At the point of salvage. The pulls were painted, and all parts were very dirty and heavily tarnished(see last photo) Since then, we removed the paint and cleaned and polished the bronze to the best of our ability. There are a few spots on the pulls where the tarnish was too stubborn to remove. The set was removed from the front door of an apartment building in NYC(see 2nd to last photo) During it's years of service. It acquired some small dents and scratches, which are only cosmetic blemishes or"character marks. There are no serious flaws like breaks, cracks, or gouges. We opened, inspected, and we sprayed grease on and around all internal parts to facilitate their movement. All parts are still strong, sturdy, and ready for another lifetime of service. Dimensions: Pulls: Plates) 3 1/8" W x 14 1/2" H(Handles) 1" W x 6" H x 2" D(finger space between the pull and the backplate) 1 1/2" Strikeplate: 1 1/4" W x 5 3/4" H Lock: Faceplate) 1 3/8" W x 7 3/8" H(Body) 3 5/8" W x 5 1/8" H x 1" D(Backset) distance from the facep
|
|
|
Vintage Tudor Cast Iron Entry Exterior Door Lockset Set Knob Plate Lock Key
Penn Antique Restoration. Antique Tudor Style Iron Door Set w/Knobs. Plates, Lock, Key Beautiful. Antique, exterior door lockset made by. McKinney Manufacturing Company, of Pittsburgh, PA around the middle the previous century. The set consists of 2 iron knobs; 2 escutcheons(1 has a thumbturn) 1 iron mortise lock with bronze faceplate; 1 steel strike plate for the door jamb; the original"McKinney" mortise cylinder w/o key; a bronze. Corbin, mortise cylinder w/1 working key and bronze anti-theft collar; and 1 spindle with 2 setscrews to connect the knobs. All iron parts are solid, heavy, thick, cast iron, not flimsy, stamped(pressed) steel. Originally. All iron parts were painted with a black enamel paint, and surprisingly, most of the paint remained! The knobs and plates have a lovely. Hammered texture, and an elegant, Tudor style ... moredesign. Since we didn't want to remove any of the original. Black paint, we opted not to clean the set. However, we could try to clean it to achieve a uniform finish(no guarantee) for an additional $25-email us after the auction if you're interested. All parts are in great condition with only the typical small nicks and light scratches that you would expect to find on old. Used hardware. However, there are no breaks, cracks, chips, dents, gouges, or deep scratches. About the lock: The lock is reversible and could accommodate either a left or right swing door. The buttons on the lock faceplate control a function. Which disables/enables the exterior knob from turning. Once the bottom button is depressed, the exterior knob will not turn, and the upper latch will remain extended, in the locked position. In essence, the upper latch acts as a deadbolt and provides an extra level of security from anyone on the outside of the door. Once the exterior knob is frozen, and the door is shut, the only way to retract the upper latch is by using the key for the top keyhole, or by turning the interior knob. This is a very convenient feature for the person inside of the house/room. No m
|
|
|
Antique Bronze Exterior Entry Door Lockset Set 4"x16 Pull Handle Push Plate Lock
Penn Antique Restoration. Vintage Corbin Brass Entry Door Lockset w/4"x16" Pull& Push Plate. Lock, Key. Wow. What a rare find! Heavy-duty, commercial-grade, door lockset made by, P.F Corbin Mfg. Co. of New Britain, CT sometime during the first half of the previous century. The set consists of 2 long bronze back plates, 1 bronze handle, 1 iron mortise lock with bronze faceplate, 2 brass mortise cylinders w/bronze anti-theft collars, and 1 bronze strike plate for the door jamb. All bronze parts are solid, heavy, thick, cast bronze, not stamped or plated steel. We found the cylinder mortises without keys. Without keys. We are uncertain if the cylinders work. You could take them to a local locksmith, who could rekey them for under $20 each. If they are not functional, you could also buy new cylinders with 2 keys for the same price. ... moreWe found the set with a beautiful. Original patina, which we didn't want to disturb. However, if you prefer your hardware bright and shiny, we could clean and polish the parts prior to shipping for an additional $30-email us after the auction if you're interested. The beauty and superior quality of the set are only equaled by its superb condition! All parts are free of breaks. Cracks, chips, gouges, or deep scratches. We opened, inspected, and greased the internal parts of the mortise lock to facilitate their movement. The lock operates smoothly. If you think that the parts look nice in the photos. Wait until you see them in person! Once you grab hold of the old-world quality, you will be able to truly appreciate the fine craftsmanship and metal purity, which is rare to find now-a-days. This heavy-duty lockset was built to last 2 lifetimes. And certainly has another 100+ years left in it-don't miss out! Dimensions Pull Back Plates: 4" W x 16" H x 3/8" D Handle: 1 1/4" W x 6 1/4" H x 1 1/4" finger space in between handle and back plate) Strike Plate: 1 1/4" W x 6 1/8" H Lock: Face plate) 1 1/4" W x 7" H(Body) 3 1/2&
|
|
|
Large NICKEL REESE Exterior Entry Door Lockset Set Knobs Plates Lock & Key LLM41
THIS IS A COMPLETE ENTRY DOOR LOCK WITH PLATES. KNOBS AND KEY. VERY HEAVY DUTY LOCK SETUP. DOES NOT NEED POLISHING AND CLEANING, RECENTLY SERVICED(GOD BLESS MY LESSONS IN LIFE) WORKS GREAT& BETTER THAN EVER NOW. VERY EASILY. PLATES MEASURE 8" IN LENGTH.
|
|
|
Vintage Heavy Duty Cast Bronze Exterior Entry Door Lockset Knobs Plates Lock (2)
Offered for Bid is a Nice Vintage Heavy Duty Cast Bronze Exterior Entry Door Lockset Knobs Plates Lock. Vintage Item. With Nice Patina. NO Key Included. Measures 7" Tall and 2.5" Wide.
|
|
 |