|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
1d 23h 49m 9s 0 bids
$58.50 Now
$23.85 Shipping Location: Taunton, United States Nice old lock. got it all cleaned up and reasembeled. took the cylinder to a top notch lock smith and he made a key for 45.00 then i reasembled it.problem.would ... morenot work probably. so i took it apart.
Buy It Now
$13.06 Shipping Location: Bloomington, United States For your consideration an antique 1899 lock set. Still works properly. Key is missing.
Buy It Now
$18.40 Shipping Location: Bullhead City, United States I have been an avid collector of antiques & collectibles for fifty years. Lock Body: 2 5/8" H X 2 5/16" W X 1 7/8" D, Back Plate: 8 3/8" H X 3 1/16" W ... moreX 1/2" Inside Door Back Plate D, 5/8" Outside Door Back Plate D.
$10.07 Shipping Location: Huntington Station, United States Item description Antique P. F. Corbin bronze entry door lock. The general pattern of this lock was highly successful for Corbin. This set is in excellent ... morecosmetic and mechanical condition with only the typical signs of wear and use. Although the design on the lock and door plates are often refered to as the"Ceylon" pattern. That name was limited to the knob design seen with this set. This set includes a matching strike plate that has been opened up a bit, but otherwise looks fine. The switch on the face plate of the lock allows the door to be closed in a prelocked position and the included latch bolt key is needed to properly utilize this feature. The set includes one bronze faced reversible entry mortise lock. Two"Ceylon" pattern knobs, one large door plate and round knob escutcheon, matching strike plate, single keyhole cover, and both the latchbolt and deadbolt keys. Also included is a reconditioned knob spindle with new set screws. The set screw holes have been deburred so the screws turn in easily. This is a very nice functioning lock set ready to be installed. The mortise lock's backset to the keyhole is 2 5/8" and the face plate is 6 13/16" tall x 1" wide. The lock box is 4 5/8" tall x 5/8" thick x 3 9/16" deep. The large door plate is 7 1/4" tall x 1 15/16" wide. The knobs are 2 1/4" in diameter. The round escutcheon is 2 1/8" in diameter, the strike plate is 4 1/4" x 15/16" and the keyhole cover is 1 3/4" x 1 1/8" If your going to spend real money on a vintage lock set you should expect no broken or missing pieces. A look inside the lock box, pieces that have not been abraded and diminished by sand blasting and at a minimum the ability to make a return. Condition All of my pieces have been carefully cleaned with attention given to preserving original finishes where they remain intact. Many pieces fall victim to wire brushing and high speed polishing which only results in a rough pitted surface and erosion of the
Buy It Now
$14.95 Shipping Location: United States For your consideration is an incredible antique entry mortise door lock set manufactured by Norwalk Lock Co.in S. Norwalk Conn. in the early 1900's. The ... moremortise lock is # 714 and has two brass pull handles with thumb latch, two cylinder locks, and 2 keys The strike, bolt, face plates, and many of the internal parts are made of brass.
Buy It Now
Free Shipping Location: Sacramento, United States Product Type: Entry Lockset. Fits doors between 1 3/8 to 1-3/4" thick. 2-3/8" to2-3/4" adjustable backset Kwikset keyway. Hand Tools And Tool Accessories. ... moreDoor Direction: Left or Right Handed. Power Tools.
Buy It Now
$10.51 Shipping Location: Wilmette, United States Total weight is 3 lb 9 oz unboxed; without the rectangular lock, (just the brass parts) it is still 2 lbs - so sturdy, heavy, very nice! Antique solid ... morebrass door hardware including oval door knobs, back plates and lock - all original.
Buy It Now
$14.95 Shipping Location: United States For your consideration is a incredible antique eastlake entry mortise door lock set manufactured by by P.F. Corbin in New Britain Conn in the early 1900's. ... moreThe lock set is from the 'Ceylon' design collection as shown in the 1905 Corbin trade catalog.
Buy It Now
$14.95 Shipping Location: United States For your consideration is an incredible antique entry mortise door lock set manufactured by Lockwood Hardware MFG Co. in Fitchburg Mass. in the early ... more1900's. The set is # T5000 as shown in the 1932 Lockwood trade catalog.
Buy It Now
$16.40 Shipping Location: Bay Shore, United States Antique : lock measuring approximately 4 inches internal 3 1/2 inches brass no key ; not sure of working condition see pictures
Buy It Now
$11.20 Shipping Location: Austin, United States Antique Victorian 1910 Corbin Cast Bronze Doorknobs Door Handle Keyed Lock Set Hardware Metalware CollectiblesIn pre-owned condition. Flaws due to age ... moreand use (Zoom to see photos). Signed: Corbin. Price of a set as shown in photos. No key. Sold as is. No refund. A great piece to add on your collection. Wonderful gift for ones who love collecting metalware items.Item might show some wears consistent with age and use. I believe this will add more charm to your collection. I still have a tons of #antique #vintage collectibles listed in our store. Browse around, purchase more! I’m glad to combine shipping! Signature confirmation upon delivery is required for item more than $250.Thank you for stopping by!
Buy It Now
$24.95 Shipping Location: Redwood City, United States This antique door lock set from Yale features beautiful bronze and steel construction, with stunning octagon glass door knobs. The set is perfect for ... moreany home or business that values quality hardware with a vintage touch. Crafted from high-quality materials and designed to last, this door lock set is a must-have for any collector of antique hardware. Its intricate details and unique design make it a true standout piece that is sure to impress. Whether you're renovating an old home or simply looking to add a touch of history to your space, this antique door lock set is the perfect choice.
Buy It Now
Free Shipping Location: Seattle, United States ⚠⚠⚠ WARNING ❗❗❗ This is NOT an automatic dead-bolt lock ! After pressing a valid code, you have ONLY 3-sec (indicated by a 3-sec long beep) to TURN the ... morekeypad knob to unlock! If you don’t turn the keypad knob within this 3-sec, the lock will be back to the “lock position.”.
Buy It Now
$27.95 Shipping Location: Los Angeles, United States ⚠⚠⚠ WARNING ❗❗❗ This is NOT an automatic dead-bolt lock ! After pressing a valid code, you have ONLY 3-sec (indicated by a 3-sec long beep) to TURN the ... morekeypad knob to unlock! If you don’t turn the keypad knob within this 3-sec, the lock will be back to the “lock position.”.
Buy It Now
$15.95 Shipping Location: United States For your consideration is an incredible entry unit door lock set manufactured by P.F. Corbin in New Britain Conn. in the early to mid 1900's. The lock ... moreset is # 2467 as shown in the 1941 Corbin trade catalog.
Buy It Now
$14.42 Shipping Location: High Point, United States Add some vintage charm to your entryway with this antique solid brass entry door lock set from National Lock Hardware. The rich brown color and intricate ... moredesign of the door handle and knob will surely catch the eye of anyone who enters your home. This set is made from high-quality brass and is new old stock, ensuring its longevity and durability. Perfect for any home decor, this set adds a touch of elegance and sophistication to your home. Whether you're replacing an old lock or adding a new one, this National Lock Hardware set is the perfect choice.I DO NOT KNOW IF IT IS COMPLETE SEE PICTURES.
Buy It Now
$18.40 Shipping Location: Buffalo, United States Antique Arts & Crafts Brass Copper Door Handle Mortise Lock Set Key Entry 6 Side. Hello we have a stunning arts and crafts door handle and lock set. This ... moreis a heavy duty lock set. It has a spot for a key. We do not have the key. The door handle has six sides to it. It appears to be in working condition. We are unsure of the material. It is not magnetic so we believe it is made of brass or copper or both, and could possibly have some bronze in it. There is a patent date on the lock set see pictures. The last date patent date is 1900. This is probably 120+ years old. Check pictures for sizes and condition. Selling as is as found condition. If you have any questions, please email. Thanks for looking.
Buy It Now
$14.00 Shipping Location: Hortonville, United States
Buy It Now
Free Shipping Location: Augusta, United States Gate House Mortise Lockset Entry not for Exterior Use
Buy It Now
Free Shipping Location: New York, United States ⚠⚠⚠ WARNING ❗❗❗ This is NOT an automatic dead-bolt lock ! After pressing a valid code, you have ONLY 3-sec (indicated by a 3-sec long beep) to TURN the ... morekeypad knob to unlock! If you don’t turn the keypad knob within this 3-sec, the lock will be back to the “lock position.”.
Buy It Now
$13.60 Shipping Location: Douglas, United States
Buy It Now
$15.00 Shipping Location: Buffalo, United States They look like new. I also have several entry set pieces.
$10.00 Shipping Location: Houston, United States The set includes two black and brass knobs and features intricate design details that are sure to impress.
Buy It Now
$15.00 Shipping Location: Buffalo, United States Corbin 1895 Victorian Aesthetic Eastlake Ceylon Entrance Set Knobs, Plates, Strike Plate, Mortise & original matched Keys B-11300. I have many Ceylon ... moresets in various, patterns, finishes, and conditions.
Buy It Now
$18.40 Shipping Location: Denver, United States Lot of Variois Emtek/Rocky Mt. Hardware door locks. Shipped with USPS Priority Mail Medium Flat Rate Box. In this lot of fancy looking door hardware there ... moreis an emtek passage lever RH w/optional glass trim knob and pewter finished rosettes.Also featured are 2 Rocky Mt. Hardware decorative passage levers, 1 RH and 1 LH. Each lever comes with a 2 3/8" backset and also included is a decorative dummy set meant to be installed on the inactive side of a double door entry way residentially.
Buy It Now
$8.89 Shipping Location: Columbus, United States Antique Victorian Art Deco Door Lock Set. Looks like mortise lock set is made up of a combination of brass and cast iron. The door knob and lock switch ... moreare brass. Lock set looks like everything is in good working order and moves freely when turning the knobs.
Buy It Now
Free Shipping Location: Winston Salem, United States 【HEAVY-DUTY MATERIAL & ENDURING FINISH】The double door handle set with dummy is made of heavy-duty zinc alloy for long life and not easy to break! Antique ... moreBrass finish with strong anti-rust and anti-corrosion ability.
Buy It Now
$15.00 Shipping Location: Buffalo, United States They look like new. I also have several entry set pieces.
|
|
|
|
Antique Colonial Cast Bronze Exterior Entry Door Set Lockset Knob Plate Lock Key
Penn Antique Restoration. Antique Colonial Style Cast Bronze Entry Door Set Lockset. Elegant. Original, antique, exterior door lockset salvaged from Southeastern PA. The set includes 2 bronze knobs, 1 large bronze escutcheon with swinging keyhole cover, 1 bronze rosette, 1 bronze keyhole cover, 1 iron mortise lock with bronze faceplate, 1 working key, 1 bronze strike plate for the door jamb, and 1 spindle with 2 set screws. All bronze parts are solid, heavy, cast bronze. At the point of salvage all parts were dirty. Partially painted, and unevenly tarnished(see last photo) Since then, we've cleaned and polished all parts to the best of our ability. You could tell that the hardware came from a well-maintained home because the set is in great shape! The parts have nicks and scratches. Which are typical for hardware this old, but no breaks, ... morecracks, gouges, or chips. The lock was opened. Inspected, and WD-40 was sprayed on and around all parts to facilitate their movement. A key was made especially for this lock, and we could make more for $6/key—let us know if you are interested. After the auction. Someone removed the buttons from the lock faceplate. The buttons controlled a function. Which disabled/enabled the knobs to turn. With the knobs unable to turn, the upper latch remains extended, in the locked position. In essence, both latches would act as deadbolts and provide extra security. Once the knobs are frozen, and the door is shut, the only way to retract the upper latch is by using the key for the top keyhole. I'm certain that whoever removed the buttons, didn't have the key for the top keyhole and he/she had to force the door open in order to push the button, to enable the knobs to turn. If this were my set, I would remove the buttons as well, and this is not only because I'm a parent of a young child who couldn't help himself from playing with the buttons; but accidents do happen. I may bump into the button on way on my way out, and by the time I get home, I have to break into my house bec
|
|
|
Antique 1910 Arts & Crafts Cast Brass Entry Door Set Knob Plate Lock Lockset Key
Penn Antique Restoration. Heavy Duty Arts& Crafts Entry Door Set Knobs Plates Lock*Please note that there are no mortise cylinders included with this set. Beautiful. Bold, entry set salvaged from Northeastern, NJ. The set consists of 2 brass knobs, 1 large brass escutcheon, 1 brass rosette, 1 brass thumbturn, 1 brass anti-theft collar, 1 steel lock with brass faceplate, and 1 split spindle with 2 setscrews. All brass parts are solid, heavy, thick, cast brass not stamped brass or brass-plated iron. Although there are no markings, judging by the design, I am pretty sure this set was made by"Russwin" of New Britain, CT. Unlike most old-fashioned mortise locks. Which have rectangular deadbolts; this lock has cylindrical bolts with odd-shaped heads. When you turn the key, the bolts spin as they spring forth from the lock. The spinning ... morecauses the heads to turn in a corkscrew manner. Because of this feature, this will require a special strike plate with circular holes, not the typical rectangular holes. Unfortunately, we don't have any compatible plates, however, I don't think it would cost too much to have one made-less than $50 for sure. We do not have any mortise cylinders that will fully extend the latch. Our cylinders only push it out halfway. However. You can stop at any locksmith shop to buy one that will work for this lock. The knobs and escutcheons have a lovely design accentuated by a grainy texture on the faces of all the parts except for the lock. At the point of salvage. The set was found with many layers of paint and was heavily tarnished(see last photo) Since then, we've removed the paint, cleaned, and polished the set to the best of our ability. All parts are in great condition with only a few signs of wear like nicks and scratches. Otherwise there are no breaks. Cracks, chips, dents, or heavy scratches. The lock was opened, inspected, and we sprayed WD40 on and around all internal parts to facilitate their movement. This is not your typical vintage or antique set of hardware. I
|
|
|
Antique French Solid Brass Entry Door Lockset Set Knob Plate Escutcheon Lock Key
Penn Antique Restoration. Antique French Style Entry Door Set Knobs Plate Lock Key. Wonderful. Antique, entry door lockset made by"Russell& Erwin Mfg. Co. of New Britain, CT around the turn of the previous century. The set consists of 2 cast brass knobs, 2 stamped brass escutcheons, 1 iron mortise lock with bronze faceplate, 2 working keys, 1 brass strike plate for the door jamb, and 1 spindle with 2 set screws to connect the knobs. All brass/bronze parts are solid brass/bronze, not brass plated steel. The knobs and escutcheons have a stunning French style design featuring fleur de lis. Prim roses, leaves, cartouches, and various geometric shapes. All parts were found dirty and unevenly tarnished(see last photo) Since then. We've clea ned and polished all parts to a uniform finish. There is a break in the upper right corner of ... morethe cover plate of the lock body. The break does not hinder the set's functionality and once the lock is installed in your door. It will be concealed. There are also some shallow dents and light scratches on the lock's faceplate. The rest of the parts are in excellent condition with no breaks, cracks, chips, dents, or deep scratches. The lock was opened. Inspected, and we sprayed machine oil on and around all parts to facilitate their movement. We also made 2 keys to operate the lock, and we could make more for $6/key-email us after the auction if you are interested. Most antique. Exterior locksets have one, grand escutcheon for the front of the door, and 2 or 3 smaller, less attractive plates for the back. Sets like this, with 2, large escutcheons, are rarer and make a bigger aesthetic impact on the overall splendor of a door-don't miss this opportunity! Dimensions: Knobs: 2 1/4" diameter x 2 1/8" D Escutcheon: 2 7/8" W x 10 3/4"H Strikeplate: 1" W x 4 1/4" H Lock: Plate) 1" W x 7" H(Body) 3 3/8" W x 4 7/8" H x 5/8" D(Backset-distance from faceplate to center of keyhole) 2 5/8" Shipping: U.S. FREE! Canada:
|
|
|
Antique Mortise Lockset Victorian Entry Door Hardware set Door Knobs No Key Used
You are bidding on an Antique Mortise Lockset Victorian Entry Door Hardware set Door Knobs No Key Used" Condition: Used. In Good Condition. There is surface rust but this is to be expected on such an old piece. The brown doorknob has a couple of chips in it. The black doorknob looks good. No skeleton key. No strike plate. Manufacturer: Unknown Age/ Date: Unknown. No patent dates. I'd estimate this is from the late 1800's to the early 1900's. This is a true antique! Markings: None found. Size: The body of the lock housing is 3" deep(inset) 3-1/2" tall and 9/16" thick. The face that protrudes from the door measures 5-3/8" tall by 15/16" and it's 3/16" thick. The faces behind the doorknobs measure 5-7/16" by 1-1/2" and are 3/32" thick. As currently mounted, the doorknobs are 5-1/2" ... morefrom end to end. Weight: This complete lockset weighs ~ 2# Comments: Ready to be put to use. Or add to your collection. Picture(s) are the actual item(s) for sale. Email me with any question before bidding. I'm happy to combine shipping; If you purchase multiple items. Please don't pay until you receive an updated invoice, so you can get the correct shipping price. Please check out my eBay store for more great deals. Disclaimer: Almost all my items are used unless I specify otherwise in the description. I am not an expert on anything. Likewise, I do not"study" the objects I purchase, so I may not find some flaws. Check my 100% feedback and you'll see that I'm a stand-up guy. Bid with confidence!
|
|
|
Antique Greek Revival Cast Iron Deadbolt Entry Door Lockset Set Pull Handle Lock
Penn Antique Restoration. Antique Greek Revival Iron Entry Door Set Pull Handle Lock. What a rare find! This grand. Exterior door lockset was made by"P.F. Corbin Mfg. Co. of New Britain, CT around the turn of the previous century. It consists of 2 iron pulls(2 large back plates, 2 thumb latches, 2 handles) 1 iron mortise lock, 1 brass strike plate for the door jamb, and 2 nuts, 2 washers, and 2 bolts to secure the pulls. All parts are solid, heavy, and thick cast iron, not stamped or pressed wrought iron. Originally, the pulls were copper plated, however, most of the plating wore off of one of the pulls and some of the plating wore off of the other, leaving the parts with a nice distressed look. Many times. Sets like this are used only to keep a door closed and to look pretty, so we didn't make a key for the lock. However, if you ... morealso need the set for security, we should be able to make a key. The first key would cost $10- $20, and each additional key would cost $10-email us after the auction if you are interested. Each pull has a lovely. Neo-Grec style, egg and dart border. The set was salvaged from Southwestern Minnesota. At the point of salvage. All parts were dirty and rusty(see last photo) Since then, we've carefully cleaned all parts to the best of our ability, trying to preserve as much of the plating as possible. The beauty of the pulls is only matched by their superb condition! Aside from the typical small nicks& light scratches here and there. Which are common for 100+ year old hardware; all parts a free of breaks, cracks, chips, dents, or deep scratches. Someone widened the keyhole on the pull with less plating. It's not a flaw. Which affects the structural integrity or function of the pull, just more of a permanent, visual quirk, like someone carving their name on a desk top. Dimensions Pull Back Plates: 2 3/4" W x 14" H Pull Handles: 1 1/8" W x 5 3/8" H x 1 1/2" finger space in between handle and back plate) Strike Plate: 1 1/8" W x 4 1/4" H Loc
|
|
|
Antique Eastlake Bronze Entry Door Lockset Set Knob and Bell, Hinges, And Pull
Up for bid is a set of Eastlake salvaged door hardware! With bell and pull. The pull has been broken off one corner! Good condition! Posted with
|
|
|
Antique Victorian Eastlake Bronze Entry Door Lockset Set Knobs Plates Lock Keys
Penn Antique Restoration. Antique RHC Eastlake Entry Door Set w/Knobs. Plates, Lock, Keys Wonderful. Antique, exterior door lockset made by the"Reading Hardware Company" of Reading, Pennsylvania during the late 1800's. The set includes 2 bronze knobs, 1 bronze escutcheon, 1 bronze rosette, 1 bronze keyhole cover, 1 bronze thumb turn, 1 iron mortise lock with bronze faceplate and 2 working keys, 1 bronze strike plate for the door jamb, and 1 spindle with 2 setscrews to connect the knobs. All bronze parts are solid bronze not plated iron. The lock is reversible and could accommodate either a right or left swing door. All bronze parts have lovely. Aesthetic(Eastlake) style designs consisting of flowers, leaves, wagon-wheels, beads, and various geometric shapes. We found the parts with a rich. Original patina, which we opted not ... moreto disturb. If you prefer your hardware bright and shiny, we could clean and polish all parts prior to shipping for an additional $25-email us after the auction if you're interested. The base of one of the knobs is slightly pushed into the back of the knob. As a result. The knob is 1/8" shorter than the other, and there is a shallow, circular depression(see close up photo of knobs) Once installed, the only way you could see the depression is by pressing your head against the door and looking behind the knob, so it will be pretty hard to notice unless you're looking for it. There are a few small. Dents on the strike plate, but otherwise, all parts are in great shape with no breaks, cracks, chips, dents, gouges, or deep scratches. The details are sharp and show few signs of wear. The lock was opened, inspected, and greased to function more smoothly. We made 2 keys to operate the lock, and we could make more for $8/key-email us after the auction if you are interested. It's tough to find complete. Antique sets in such fantastic condition. With all parts included, this set will be ready to install as soon as it arrives. Who knows if and when another opportunity like
|
|
|
Antique Corbin Eastlake Bronze Entry Door Lockset Set Knob and Bell 1880
Antique Corbin Eastlake Bronze Entry Door Lockset Set Knob and Bell 1880 came off a 1800's farmhouse and was still being used for the front door(had a small fire in back of house) the bell is marked 1879 and the corbin lock is dated 1880. Comes with the key Shipping $7 Posted with the
|
|
|
Antique Arts Crafts Cast Brass Entry Double Door Lockset Set Knob Plate Lock Key
Penn Antique Restoration. Antique Arts& Crafts Brass Double Door Set w/Knobs. Plates, Lock& Key. Gorgeous. Antique, exterior door lockset salvaged from Northeastern Pennsylvania. The set consists of 2 brass knobs, 1 brass escutcheon and 1 bronze escutcheon, 1 steel mortise lock bronze faceplate, 1 bronze cylinder mortise with 2 working keys& 1 bronze anti-theft collar, 1 brass strike plate for the door jamb, 1 split spindle with 2 setscrews to connect the knobs. All brass/bronze parts are solid, heavy, thick, cast brass/bronze, not stamped or pressed brass/bronze or plated steel. At the point of salvage. The set was found painted, dirty, and unevenly tarnished. Since then, we've removed the paint, and cleaned and polished the set to the best of our ability. The set is in excellent condition. And only has the light nicks and ... morescratches that you would expect to find on nearly 100-year old hardware. There are no chips, breaks, cracks, gouges, or dents. About the lock: This lock is designed to be installed on a pair of double doors. Which have rabetted(stepped) inner edges(see last 3 photos for an example) The lock is reversible and could accommodate the swing of any door. The mortise lock is locked by pushing the top button on the faceplate. And unlocked by either pushing the bottom button or using a key. Once locked, the door could only be opened by turning the knob on the interior side of the door, or by using the key on the exterior side of the door. This is a very convenient feature for the person inside of the room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the bottom button. The lock was opened. Inspected, and we sprayed greased on and around all internal parts to facilitate their movement. Both the mortise lock and cylinder mortise operate smoothly and are ready to serve for many years to come. Dimensions: Knobs: 2 1/4" diameter x 2 1/4"
|
|
|
Restored Antique Art Nouveau Bronze Entry Door Lockset Set Knobs Plate Lock Keys
Penn Antique Restoration. Antique"Putnam" Bronze Entry Door Set w/Knobs. Plates, Lock, Keys. Exquisite. Original, antique entry door set made by“P.F. Corbin Mfg. Co. of New Britain, CT circa 1895. The set consists of 2 bronze knobs, 2 bronze escutcheons, 1 iron lock with bronze faceplate and 2 working keys, 1 bronze-plated steel strikeplate for the door jamb, and a spindle with 2 set screws to connect the knobs. All are bronze parts solid bronze, not plated iron, and are fairly heavy—good quality pieces. They were originally copper plated, and although the plates retain most of their plating, most of the copper has worn off of the knobs and lock faceplate. The knobs and escutcheons feature the lovely. Floral, Putnam” pattern. Notice the swinging keyhole cover on the exterior escutcheon-what a great accent! The set was salvaged from ... moreEastern Indiana. At the point of salvage. The set was painted, dirty, and unevenly tarnished(see last photo) Since then we've cleaned and polished the parts to the best of our ability, while trying to preserve as much of the plating as possible. All parts are in great condition with only the nicks and scratches that you would expect to find on 100+ year-old hardware. However. There are no breaks, cracks, chips, dents, or gouges. About the lock: The lock is reversible and could accommodate the swing of any door. The buttons on the lock faceplate control a function. Which disables/enables the exterior knob from turning. Once the bottom button is depressed, the exterior knob will not turn, and the upper latch will remain extended, in the locked position. In essence, the upper latch acts as a deadbolt and provides an extra level of security from anyone on the outside of the door. Once the exterior knob is frozen, and the door is shut, the only way to retract the upper latch is by using the key for the top keyhole, or by turning the interior knob. This is a very convenient feature for the person inside of the house/room. No more locking and unlocking to let someone in. Simply
|
|
|
Antique Russwin Arts & Crafts Bronze Entry Door Lockset Set Knobs Plate Lock Key
Penn Antique Restoration. Antique"Russwin" Arts& Crafts Entry Door Set w/Knobs. Plates, Lock, Key. Elegant. Original, antique, exterior door lockset salvaged from Northern Ohio. The set includes 2 bronze knobs, 2 stamped bronze escutcheons, 1 iron mortise lock with bronze faceplate, 1 working key, 1 brass strike plate for the door jamb, and 1 spindle with 2 set screws. Originally, all bronze parts were copper plated, and surprisingly, much of the plating has remained! Only the knobs have lost most of their plating. At the point of salvage all parts were dirty and unevenly tarnished(see last photo) Since then. We've cleaned and polished all parts to the best of our ability. You could tell that the hardware came from a well-maintained home because the set is in very good condition. The knobs and escutcheons are free of breaks. ... moreCracks, gouges, dents, or deep scratches and have little signs of wear. Their details are incredibly sharp! About the lock: The lock is reversible and could accommodate the swing of any door. Someone removed the buttons that were originally above the upper latch. The buttons controlled a function. Which disabled/enabled the knobs to turn. With the knobs unable to turn, the upper latch remains extended, in the locked position. In essence, both latches would act as deadbolts and provide extra security. Once the knobs are frozen, and the door is shut, the only way to retract the upper latch is by using the key for the top keyhole. I'm certain that whoever removed the buttons, didn't have the key for the top keyhole and he/she had to force the door open in order to push the button, to enable the knobs to turn. If this were my set, I would remove the buttons as well, and this is not only because I'm a parent of a young child who couldn't help himself from playing with the buttons; but accidents do happen. I may bump into the button on way on my way out, and by the time I get home, I have to break into my house because I don't have the upper skeleton key! We op
|
|
|
Vintage Art Deco Brass Entry Door Lockset Set Pull Handle Knob Plate Lock & Key
Penn Antique Restoration. Vintage Brass"Lockwood" Art Deco Entry Door Set w/Knob. Pull, Lock& Key Elegant. Vintage, exterior, lockset made by"Lockwood" of Lockwood, CT sometime around the middle of the previous century. The set consists of 1 brass pull with a thumb latch, 1 brass knob with a 2-piece steel spindle(connecting rod) 1 stamped brass-plated steel rosette, 1 stamped brass thumbturn. 1 brass mortise cylinder plate, 1 steel mortise lock with brass faceplate, 1 brass cylinder mortise w/working key, 1 brass strike plate for the door jamb, and 2 brass washers. Several steel washers, 2 steel securing nuts, and 2 brass bolts to fasten the pull to the door The set was salvaged from Northwestern North Carolina. We found the parts with a nice. Warm patina, which we decided to leave undisturbed. If you prefer your hardware ... morebright and shiny, we could clean and polish the set prior to shipping for an additional charge of $30- email us after the auction if you are interested. All parts are in excellent condition with only the typical nicks and light scratches that you would expect to find on old hardware. But no breaks, cracks, chips, dents, or deep scratches. About the lock: The lock is reversible and could accommodate the swing of any door. The mortise lock is locked by pushing the top button on the faceplate. And unlocked by either pushing the bottom button or using a key. Once locked, the door could only be opened by turning the knob on the interior side of the door, or by using the key on the exterior side of the door. This is a very convenient feature for the person inside of the room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the bottom button. The lock was opened. Inspected, and we sprayed greased on and around all internal parts to facilitate their movement. Both the mortise lock and cylinder mortise operate smoothly and are ready to ser
|
|
|
Antique Yale Deco Nickel Brass Exterior Entry Door Lockset Set Knob Plate Lock
Penn Antique Restoration. Antique"Yale" Nickel-plated Brass Exterior Set w/Knobs. Plates, Lock, Screws. Rare. Elegant, antique, exterior door lockset made by, Yale" of Stamford CT sometime during the first half of the previous century. It consists of 2 brass knobs, 2 brass escutcheons, 1 iron mortise lock with brass faceplate, 1 brass mortise cylinder, 1 brass strike plate for the door jamb, 1 steel spindle with 1 setscrew and 1 securing pin connect the knobs, and all 8 of the original screws to fasten the parts to the door. All brass parts are solid. Brass, not plated steel. Except for the escutcheons which are stamped(pressed) brass, all brass parts are heavy, thick, cast brass. Originally, all parts were nickel plated, and surprisingly, most of the plating remains! Either the plating is very thick, or this set was hardly ... moreused, because after almost a century of use, the plating should've at least wore off of the knobs. The knobs and escutcheons have a fantastic. Art Deco style design, which is accentuated by an unusual textured detail. At the point of salvage. Some parts were painted and all parts were dirty and unevenly tarnished(see last photo) Since then, we've cleaned and polished all parts to the best of our ability. All parts have some cosmetic blemishes including nicks and scratches. Which are best conveyed by the photos. However, these just add a distressed charm to the parts and do not pose any threat to the structural integrity of the parts. All parts are strong, sturdy, and ready to serve another lifetime. About the lock: The mortise lock is reversible and could accommodate a right or left swinging door. We found the cylinder mortise without a key. Without a key. We are uncertain if the cylinder works. You could take it to a local locksmith, who may be able to rekey it. Worst case, if he/she can not make a key for it: 1) you would have to buy a new cylinder with keys for about $20 and widen the hole in the exterior plate from it's current size of 5/8" diameter to 1 1/8
|
|
|
Vintage Arts Crafts Brass Exterior Entry Door Lockset Set Knob Plate Lock + Keys
Penn Antique Restoration. Vintage"Russwin" Brass Exterior Set w/Knobs. Plates, Lock, 3 Keys! Handsome. Antique, exterior door lockset made by, Russwin" of New Britain, CT sometime during the first half of the previous century. It consists of 2 brass knobs, 2 brass escutcheons, 1 iron mortise lock with brass faceplate, 1 brass mortise cylinder with a brass anti-theft collar& 3 working keys, 1 brass strike plate for the door jamb, and 1 steel spindle with 2 setscrews to connect the knobs. All brass parts are solid. Brass, not plated steel. Originally, all parts were copper plated, however, only traces of copper remain. The set was salvaged from Northwestern New York. We found all parts with a lovely amber and auburn patina. Which we didn't want to disturb. If you prefer your hardware bright and shiny. We could clean and ... morepolish the set prior to shipping for an additional $25-email us after the auction if you're interested. The knobs and smaller. Interior escutcheon have a few subtle dents which are hard to notice unless you study the parts. Otherwise. All parts just have the tiny nicks and light scratches that you would expect to find on 70- 80 year old hardware. There are no breaks, deep scratches, gouges, or cracks. Lock: The mortise lock is reversible and could accommodate a right or left swinging door. The mortise lock is locked by pushing the top button on the faceplate. And unlocked by either pushing the bottom button or using a key. Once locked, the door could only be opened by turning the knob on the interior side of the door, or by using the key on the exterior side of the door. This is a very convenient feature for the person inside of the room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the bottom button. The mortise lock was opened. Inspected, and we sprayed grease on and around all internal parts to facilitate their movement. We a
|
|
|
Antique Russwin Arts & Crafts Bronze Entry Door Lockset Set, pyramid.
For sale is an antique Russwin lock set made of solid bronze. This is remarkably heavy. Almost 6 lbs and very well built. I have no key but the unit seems tight and properly functions. I will ship to the lower 48 for 8 dollars flat fee.
|
|
|
Antique Cast Bronze Egg Dart Exterior Entry Door Lockset Set Knob Plate Lock Key
Penn Antique Restoration. Antique Cast Bronze Egg& Dart Entry Door Lockset. Wow. What a rare find! This gorgeous, antique, exterior door lockset was made by"Barrows Lock Co. of Chicago. IL around the turn of the previous century. It consists of 2 bronze knobs, 2 bronze escutcheons, 1 iron lock with bronze faceplate, 1 bronze strike plate for the door jamb, 1 bronze cylinder mortise w/4 working keys, 1 spindle w/2 setscrews to connect the knobs, and 10 installation screws to fasten the lock and plates to the door. All bronze parts are solid, heavy, thick, cast bronze, not stamped(pressed) bronze or plated iron. The knobs and escutcheons have a fantastic. Egg& dart design, which is accentuated by a beautiful, rich, original patina. All of the dark greens are pure verdigris-not paint! We know that not everyone is a fan of patina, ... moreand if you prefer your hardware clean and shiny, although it would break our heart, we could clean and polish all parts prior to shipping for an additional $30-email us after the auction if you are interested. The set was salvaged from Northeastern Indiana. We found it in excellent condition with no breaks. Chips, cracks, gouges, or deep scratches. About the lock: The lock is reversible and could accommodate the swing of any door. The mortise lock is locked by pushing the top button on the faceplate. And unlocked by either pushing the bottom button or using a key. Once locked, the door could only be opened by turning the knob on the interior side of the door, or by using the key on the exterior side of the door. This is a very convenient feature for the person inside of the room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the bottom button. The lock was opened inspected. Partially cleaned, and grease was sprayed on and around all parts to facilitate their movement. Both mortise lock and cylinder function smoothly. If you think that
|
|
|
Antique Neo Classical Bronze Exterior Entry Door Lockset Set Knob Plate Lock Key
Penn Antique Restoration. Antique Neo-Classical Bronze Door Set w/Knobs. Plates, Lock, Key Beautiful. Antique, exterior door lockset made around the turn of the previous century. The set consists of 2 bronze knobs; 1 larger, bronze, exterior escutcheon; 1 smaller, bronze, interior, escutcheon with a thumbturn; 1 iron mortise lock with bronze faceplate; 1 bronze strike plate for the door jamb; 1 brass mortise cylinder with 1 working key and 1 brass anti-theft collar; and 1 spindle with 2 setscrews to connect the knobs. All bronze/brass parts are solid bronze/brass, not plated steel. Originally, all bronze parts were copper-plated, however, much of the plating wore off over the years. The knobs and plates are embellished with an exquisite. Neo-Classical style design. At the point of salvage. The set was found dirty and unevenly tarnished(see ... morelast photo) Since then, we've cleaned and polished all parts to the best of our ability. The knob collar of the exterior plate broke or fell off at some point and someone re-secured it with solder. Although the repair worked and the collar is secure. The silver-colored ring around the collar stuck out like sore thumb. We removed most of the solder with some steal wool and a lot of elbow grease. Whatever solder remained will be concealed by the knob. On the exterior plate. There is a crack in the bottom of the knob collar, and a few small dents and scratches around the hole where the mortise cylinder goes. Otherwise, all parts are in great condition with only the typical small nicks and light scratches that you would expect to find on 100+ year old hardware. About the lock: The lock is reversible and could accommodate either a left or right swing door. The buttons on the lock faceplate control a function. Which disables/enables the exterior knob from turning. Once the bottom button is depressed, the exterior knob will not turn, and the upper latch will remain extended, in the locked position. In essence, the upper latch acts as a deadbolt and provides an extra level of sec
|
|
|
Antique Arts Crafts Brass Entry Door Lockset Set Pull Knob Handle Plate Lock Key
Penn Antique Restoration. Antique Brass Entry Door Set w/17.5" Pull. Knob, Plates, Lock, 3 Keys +Screws! Magnificent. Antique, exterior, lockset made by"Barrows Lock Co. of Chicago, IL sometime during the early 1900’s. The set consists of 1 cast brass pull with a thumb latch, 1 brass knob with a 2-piece steel spindle(connecting rod) 1 stamped escutcheon, 1 steel mortise lock with brass faceplate, 1 brass cylinder mortise with 3 working keys& 1 brass anti-theft collar, 1 brass strike plate for the door jamb, and 12 installation screws that were found with the set. The elegant Arts& Crafts style design of the set is accentuated by a dark. Rich, original patina. If you prefer your hardware bright and shiny, we could clean and polish all parts prior to shipping for an additional $40-email us after the auction if you are interested. ... moreOne side of the strike plate and the edges of the escutcheon are painted. But that could be removed without removing the patina. If you want us to remove the paint only, we could do so for an additional $8-email us after the auction if you are interested. Unfortunately. The person that we acquired the set from removed the lockset by cutting the portion of the door that housed the lockset, rather than removing the set using tools and saving the door. We took a photo of the lockset installed in the wooden piece to give you an idea of how it would look installed on a door, but the block of wood will not be shipped with the set. The beauty and quality of the set are only equaled by its superb condition! There are no breaks. Cracks, chips, dents, or deep scratches. About the lock: The lock is reversible and could accommodate the swing of any door. The mortise lock is locked by pushing the top button on the faceplate. And unlocked by either pushing the bottom button or using a key. Once locked, the door could only be opened by turning the knob on the interior side of the door, or by using the key on the exterior side of the door. This is a very convenient feature for the person
|
|
|
Vintage NOS Brass Steel Entry Exterior Door Deadbolt Lockset Set Plate Lock Key
Penn Antique Restoration. Vintage NOS Arts& Crafts Deadbolt Lockset w/Plates. Keys, Screws Elegant. Vintage, lockset made by, Welch Inc. of Waukegan, IL sometime around the middle of the previous century. The set consists of 1 steel mortise lock with brass faceplate, 1 mortise cylinder w/1 working key and 1 anti-theft collar, 1 steel plate for the mortise cylinder, 1 brass thumbturn, 1 brass strike plate for the door jamb, a 2-piece spindle to connect the knob, and 11 screws to fasten all parts to the door. All brass parts have been painted black by the manufacturer. There are a few spots where the paint wore off. But the majority is intact. This set is considered. New Old Stock, which means that it was made a long time ago, but was never installed or used. Since it was never used, all parts are in excellent condition and function like ... morenew. Dimensions: Mortise Cylinder Plate: 1 7/8" W x 2 1/2" H Thumbturn: 1 1/4" W x 1 3/4" H Strikeplate: 1 1/ 8" W x 2 5/8" H Lock: Plate) 1 1/8" W x 4 5/8" H(Body) 3 3/8" W x 3" H x 7/8"D(Backset-distance from faceplate to center of keyhole) 2 1/2" Shipping: U.S. FREE! Canada: $14.99· Asia. Australia& Europe: $19.99· Other international buyers please email us for a quote. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14b01698846-0x10e-
|
|
|
Russwin Brass Cast Bronze Entry Door Lockset Set Brass Knob Plate 42L10 lock 192
Up for sale is this Wonderful Antique Russwin doorlock set. This appears to be complete without the screws or key. The lock measures 4-1/8X3-1/2X13/16 and the face plate measures 2X6 the egg shaped knob is about 2-1/2X1-3/4 these show minor signs of previous use. I didn't test the dead bolt lock because I don't have the key so this is being sold as is. This is fairly heavy so shipping will cost the buyer 10.00. I ship in the US as well as through the Global Shipping Program. Please ask any questions you may have. Please make payment through Paypal within 24 hours of auction ending. Thanks
|
|
|
Cleaned Vintage Arts Crafts Exterior Entry Door Lockset Set Knob Plate Lock Keys
Penn Antique Restoration Penn Antique Restoration. Cleaned Vintage Arts& Crafts Door Entry Lockset w/Knobs. Plates, Lock, Key. Charming. Vintage, exterior door lockset salvaged from Upstate New York. The set consists of 2 steel knobs, 2 stamped steel escutcheons, 1 steel mortise lock with bronze faceplate and 1 working key, 1 steel strike plate for the door jamb, and 1 spindle with 2 setscrews to connect the knobs. Originally. The knobs and plates were brass plated; however, some of the plating wore off over the years leaving the parts with a nice, distressed finish. At the point of salvage. Some parts were painted, and all were dirty and rusty. Much time was spent removing the paint, and carefully cleaning and polishing all parts, trying to preserve as much of the brass plating as possible. All parts have the tiny nicks and light scratches ... morethat you would expect to find on old door hardware. However. There are no breaks. Cracks, chips, dents, or deep scratches. About the lock: The lock is reversible and could accommodate the swing of any door. The buttons on the lock faceplate control a function. Which disables/enables the exterior knob. Once the bottom button is depressed, the exterior knob cannot be turned and the triangular-shaped"passage latch" on the lock will remain extended, in the locked position. In essence, the"passage latch" acts as a secondary deadbolt and provides an extra level of security from anyone on the outside of the door. Once the exterior knob is disabled, and the door is shut, the only way to retract the upper latch is by using the key or by turning the interior knob. This is a very convenient feature for the person inside of the house/room. No more locking and unlocking to let someone in. Simply turn the knob, open the door, let someone in, close the door and it's already locked. To disable the auto-lock feature, simply push the top button. The lock was opened. Inspected, and we sprayed grease on and around all parts to facilitate their movement. We also made a
|
|
|
Vintage Brass Entry Door Lockset Set Knob Pull Handle Rosette Plate Lock Key
Penn Antique Restoration. Vintage Arts& Crafts Entry Door Set w/ Pull. Knob, Plates, Lock, Key Exquisite. Vintage, exterior, lockset salvaged from Southeastern Indiana. It consists of 1 brass pull with thumb latch& 2 securing bolts, 1 brass mortise cylinder plate, 1 brass knob, 1 brass rosette, 1 brass thumbturn, 1 steel mortise lock with brass faceplate, 1 bronze cylinder mortise with a working key, 1 brass strike plate for the door jamb, and a 2-piece. Threaded, steel spindle to connect the knob. All brass parts are solid brass, not plated steel. The handle and mortise cylinder plate have a lovely. Arts& Crafts style design with lovely spade-like forms. All brass parts have a nice patina. Which we didn't want to disturb by cleaning. There are a few spots of paint here and there which could be removed with your fingernail. ... moreIf you are not a fan of patina, and prefer your hardware bright and shiny, we could clean all parts prior to shipping for an additional $25-email us after the auction if you're interested. Considering it's age. The set is in great condition! There are some small nicks and scratches here and there, which are typical for old, used door hardware. However, there are no breaks, cracks, dents, or gouges. About the lock: The lock is fully reversible and could accommodate the swing of any door. The buttons on the lock faceplate control a function. Which disables/enables the thumb latch on the pull. Once the bottom button is depressed, the thumb latch cannot be pushed down, and the triangular-shaped"passage latch" on the lock will remain extended, in the locked position. In essence, the"passage latch" acts as a secondary deadbolt and provides an extra level of security from anyone on the outside of the door. Once the thumb latch is disabled, and the door is shut, the only way to retract the upper latch is by using the key or by turning the interior knob. This is a very convenient feature for the person inside of the house/room. No more locking and unlocking t
|
|
|
Antique Chrome Bronze Exterior Entry Door Lockset Set 15" Pull Handle Lock +Key
Penn Antique Restoration. Antique Chrome-plated Bronze Door Lockset w/ 15" Pulls. Lock, Key. Beautiful. Antique, exterior door lockset salvaged from upstate New York. It consists of 2 back plates, 2 bronze handles and thumb latches, 1 iron mortise lock with bronze faceplate, 1 bronze strike plate for the jamb, 1 bronze cylinder mortise w/1 working key& 1 bronze anti-theft collar, and 4 steel nuts to secure the pulls to the backplates. All bronze parts are solid, heavy, thick, cast bronze, not plated iron/steel. Originally, all parts were chrome plated. Most of the plating remains, however, the amount of plating varies from part to part; please see photos for more detail. The set was made by. Russwin, of New Britain, CT sometime during the first half of the previous century. The design of the pulls is called, Granby. The mortise lock ... moreis fully reversible and could accommodate the swing of any door. We only found 1 mortise cylinder with the set. Although the key works. It's a bit stubborn. A locksmith may be able to make a newer key, which will work better. You could also just get 2 new mortises, which are keyed alike to have for both front and back sides of the door. At the point of salvage. All parts were very dirty and heavily tarnished(see last photo) Since then, we've cleaned and polished all parts to the best of our ability trying to preserve as much of the plating as possible. During it's years of service. The set acquired some tiny nicks and light scratches here and there, which are only cosmetic blemishes or"character marks. There are no serious flaws like breaks, cracks, or gouges. We opened, inspected, and sprayed grease on and around all internal parts of the mortise lock to facilitate their movement. All parts are still strong, sturdy, and ready for another lifetime of service. Dimensions: Pulls: Plates) 3" W x 15" H(Handles) 1 1/8"W x 5 7/8" H x 2 3/8" D(finger space between the pull and the backplate) 1 3/4" Strikeplate: 1 1/4" W x 5" H
|
|
|
Antique SOLID Bronze Exterior Entry Door Lockset Set 14.5" Pull Handle Lock +Key
Penn Antique Restoration. Antique Bronze Door 14.5" Lockset w/Pulls. Lock, Key. Robust. Antique, exterior door lockset salvaged from New York City. It consists of 2 stamped bronze back plates, 2 cast bronze handles and thumb latches, 1 iron mortise lock with bronze faceplate, 1 bronze strike plate for the jamb, 1 bronze cylinder mortise w/1 working key& 1 bronze anti-theft collar, and 2 steel washers and nuts to secure the pulls to the backplates. All bronze parts are solid bronze, not plated iron. The mortise lock is fully reversible and could accommodate the swing of any door. Although we did find 2 cylinder mortises with the set. The key worked for only one of them. We figured that for a set like this, you would either need 2 cylinders keyed alike, or 1 keyed cylinder for the exterior side and 1 thumbturn cylinder for the interior. ... moreIf you would like the 2nd cylinder that we found, please let us know after the auction. At the point of salvage. The pulls were painted, and all parts were very dirty and heavily tarnished(see last photo) Since then, we removed the paint and cleaned and polished the bronze to the best of our ability. There are a few spots on the pulls where the tarnish was too stubborn to remove. The set was removed from the front door of an apartment building in NYC(see 2nd to last photo) During it's years of service. It acquired some small dents and scratches, which are only cosmetic blemishes or"character marks. There are no serious flaws like breaks, cracks, or gouges. We opened, inspected, and we sprayed grease on and around all internal parts to facilitate their movement. All parts are still strong, sturdy, and ready for another lifetime of service. Dimensions: Pulls: Plates) 3 1/8" W x 14 1/2" H(Handles) 1" W x 6" H x 2" D(finger space between the pull and the backplate) 1 1/2" Strikeplate: 1 1/4" W x 5 3/4" H Lock: Faceplate) 1 3/8" W x 7 3/8" H(Body) 3 5/8" W x 5 1/8" H x 1" D(Backset) distance from the facep
|
|
|
Vintage Tudor Cast Iron Entry Exterior Door Lockset Set Knob Plate Lock Key
Penn Antique Restoration. Antique Tudor Style Iron Door Set w/Knobs. Plates, Lock, Key Beautiful. Antique, exterior door lockset made by. McKinney Manufacturing Company, of Pittsburgh, PA around the middle the previous century. The set consists of 2 iron knobs; 2 escutcheons(1 has a thumbturn) 1 iron mortise lock with bronze faceplate; 1 steel strike plate for the door jamb; the original"McKinney" mortise cylinder w/o key; a bronze. Corbin, mortise cylinder w/1 working key and bronze anti-theft collar; and 1 spindle with 2 setscrews to connect the knobs. All iron parts are solid, heavy, thick, cast iron, not flimsy, stamped(pressed) steel. Originally. All iron parts were painted with a black enamel paint, and surprisingly, most of the paint remained! The knobs and plates have a lovely. Hammered texture, and an elegant, Tudor style ... moredesign. Since we didn't want to remove any of the original. Black paint, we opted not to clean the set. However, we could try to clean it to achieve a uniform finish(no guarantee) for an additional $25-email us after the auction if you're interested. All parts are in great condition with only the typical small nicks and light scratches that you would expect to find on old. Used hardware. However, there are no breaks, cracks, chips, dents, gouges, or deep scratches. About the lock: The lock is reversible and could accommodate either a left or right swing door. The buttons on the lock faceplate control a function. Which disables/enables the exterior knob from turning. Once the bottom button is depressed, the exterior knob will not turn, and the upper latch will remain extended, in the locked position. In essence, the upper latch acts as a deadbolt and provides an extra level of security from anyone on the outside of the door. Once the exterior knob is frozen, and the door is shut, the only way to retract the upper latch is by using the key for the top keyhole, or by turning the interior knob. This is a very convenient feature for the person inside of the house/room. No m
|
|
|
Antique Bronze Exterior Entry Door Lockset Set 4"x16 Pull Handle Push Plate Lock
Penn Antique Restoration. Vintage Corbin Brass Entry Door Lockset w/4"x16" Pull& Push Plate. Lock, Key. Wow. What a rare find! Heavy-duty, commercial-grade, door lockset made by, P.F Corbin Mfg. Co. of New Britain, CT sometime during the first half of the previous century. The set consists of 2 long bronze back plates, 1 bronze handle, 1 iron mortise lock with bronze faceplate, 2 brass mortise cylinders w/bronze anti-theft collars, and 1 bronze strike plate for the door jamb. All bronze parts are solid, heavy, thick, cast bronze, not stamped or plated steel. We found the cylinder mortises without keys. Without keys. We are uncertain if the cylinders work. You could take them to a local locksmith, who could rekey them for under $20 each. If they are not functional, you could also buy new cylinders with 2 keys for the same price. ... moreWe found the set with a beautiful. Original patina, which we didn't want to disturb. However, if you prefer your hardware bright and shiny, we could clean and polish the parts prior to shipping for an additional $30-email us after the auction if you're interested. The beauty and superior quality of the set are only equaled by its superb condition! All parts are free of breaks. Cracks, chips, gouges, or deep scratches. We opened, inspected, and greased the internal parts of the mortise lock to facilitate their movement. The lock operates smoothly. If you think that the parts look nice in the photos. Wait until you see them in person! Once you grab hold of the old-world quality, you will be able to truly appreciate the fine craftsmanship and metal purity, which is rare to find now-a-days. This heavy-duty lockset was built to last 2 lifetimes. And certainly has another 100+ years left in it-don't miss out! Dimensions Pull Back Plates: 4" W x 16" H x 3/8" D Handle: 1 1/4" W x 6 1/4" H x 1 1/4" finger space in between handle and back plate) Strike Plate: 1 1/4" W x 6 1/8" H Lock: Face plate) 1 1/4" W x 7" H(Body) 3 1/2&
|
|
|
Large NICKEL REESE Exterior Entry Door Lockset Set Knobs Plates Lock & Key LLM41
THIS IS A COMPLETE ENTRY DOOR LOCK WITH PLATES. KNOBS AND KEY. VERY HEAVY DUTY LOCK SETUP. DOES NOT NEED POLISHING AND CLEANING, RECENTLY SERVICED(GOD BLESS MY LESSONS IN LIFE) WORKS GREAT& BETTER THAN EVER NOW. VERY EASILY. PLATES MEASURE 8" IN LENGTH.
|
|
|
Antique Yale Solid Cast Bronze Entry Door Lockset Set 9" Pulls Handle Plate Lock
Penn Antique Restoration. Antique Yale Bronze Arts& Crafts Entry Door Set w/Pulls. Plates, Lock Exquisite. Antique, exterior, lockset made by"Yale& Towne" of Stamford, CT. during the early 1900’s. The set consists of 2 bronze handles, 6 plates: 2 w/thumb latches, 2 for the bases of the handles, and 2 for the mortise cylinders, 1 steel mortise lock with bronze faceplate, 2 bronze cylinder mortises with bronze anti-theft collar, 1 bronze strike plate for the door jamb, and 4 iron securing nuts to secure the handles to the plates. All bronze parts are solid. Heavy, thick cast bronze, not stamped bronze or plated iron. The set weighs over 7 lbs! We found the cylinder mortises without keys. Without keys. We are uncertain if the cylinders work. You could take them to a local locksmith, who could rekey them for under $20 each. ... moreIf they are not functional, you could also buy new cylinders with 2 keys for the same price. The lock is reversible and could accommodate the swing of any door. The set was salvaged from Northeastern Ohio. We found the parts with a beautiful. Rich patina, which we decided to leave. If you prefer your hardware bright and shiny, we could clean and polish the set prior to shipping for an additional charge of $30- email us after the auction if you are interested. We had a similar set a few years ago. Which we cleaned(see last photo) All parts have light scratches and small nicks here and there. Which are typical for hardware this old. Otherwise, all parts are in excellent condition with no breaks, cracks, chips, dents, or deep scratches. We opened, inspected, and applied grease on and around all internal parts of the mortise lock to facilitate their movement. It operates very well. If you have an Arts& Crafts(Mission. Prairie, Bungalow, Craftsman, Tudor, etc. style home. Victorian, Art Nouveau, Gothic, Neo-Classical, and other styles are too ornate. A simple set like this is just right. Although the set looks nice in the photos. It’s beauty and quality cannot be fully appreciated
|
|
 |